This report is intended to give an insight in the Network Performance Assessment Modeland the parameters that is needed in the making of a fictitious grid that represents anoptimal grid. A main goal is to investigate how the construction of a real grid iscompared to the fictitious.One of the key parameters is how redundancy is treated in the model and to find theoptimal amount of redundancy versus the costs. Further is the dimensioning of the grid ofinterest. The fictitious grid is based on energy whereas the real grid often is based onsubscribed power and these two principles are compared and analyzed.The difference in the outcome of the model result due to variations in input data of themodel is also discussed in the report..

The high level of energy consumption that the industrialised countries have reached and thepollution that this brings has long been a cause for analysis and debate, development and usageof so called renewable energy sources is therefore more important than ever. The energy in theelectromagnetic radiation from the sun is an interesting alternative. One way of harvesting thisenergy is by using solar cells, devices that generate DC current when exposed to electromagneticradiation.The goal of this master?s thesis was to design a solar powered power supply to Syntronic AB?sMidrange platform. The envisioned application is a stand-alone distributed embedded system,for example a node-based temperature monitoring system.

Mattias MogardGustav von HeijneSammanfattningFör framgångsrika företag är det essentiellt att ha kontroll över sina resurser. Studien tar upp ett ämne som handlar om att skapa en överblick och en medvetenhet om resurseffektivitet inom ett företags produktion.Performance measurement är ett tillvägagångssätt för att kvantifiera aktiviteterna inom en produktion. Data struktureras genom nyckeltal, Key performance indicators (KPI:er), till övergriplig och användbar information. ISO 22400 är en uppsättning standardiserade nyckeltal med ändamålet att appliceras på automatiserad produktion. Studiens syfte är hitta vilka av nyckeltalen från ISO 22400 som är lämpliga att använda vid mätningen av en helt automatiserad produktionskedja som tillverkar motorblock.

Performance measurements have become very important tools for companies because of ever increasing global competition in today?s market. Delivery dependability is one of the three most important performance measurements for companies to focus on and that makes this analysis, of the dependability, both very interesting and up to contemporary. In this rapport different aspects of delivery dependability will be dealt with, and a weight will be on what to measure and how to measure it together with how to present the outcome of the measurements. A discussion has also been held regarding what goal the company should have on its dependability.

In my study, I have chosen to examine how the user interface and content must conform to design guidelines for responsive design makes it suitable for diverse desktop environment and for varied mobile platforms. The purpose of this study is to examine the extent recommended design guidelines based on scientific research has a positive impact on user performance and perception when using this study delivered hi-fi prototype. The goal of this study is to provide a Hi-Fi prototype with high usability that will introduce and inform the public about BrasilCine according specifications. Study findings from user testing and supplementary questionnaires show that the implemented technologies as design guidelines for responsive design and design features have a positive impact on user performance and perception. The study results are therefore relevant for further prototype development..

Syftet med denna uppsats är att kartlägga hur Performance Management-system praktiseras inom svenska organisationer. Med utgångspunkt ur de teorier och modeller som återfinns i litteraturen ska sedan resultatet analyseras. Samtliga av de undersökta industrikoncernerna har tagit till sig PM-synsättet och praktiserar det i någon mån. Skälen till detta benämns vara att verktygen i större grad än annars kan få hela företaget att uppnå gemensam fokus på företagens målsättningar. Hur detta senare visar sig i hur företaget faktiskt jobbar finns det, en del att vara ifrågasättande emot.

The last few decades the development in the field of electronics has been huge. The components performance gets better at the same time as the manufacturing cost decreases. Many of the design moments that have to be done, are done automatically today, but it can get better. Especially for analog circuit design.At Electronic System in Linköpings universitet, research is in progress to develop a tool that can design analog circuits in reasonable time. It means that it has to size the components (transistors, resistances, capacitances etc), so that the circuit can fulfill the performance requirements.

I have researched different methods for practicing with the purpose of learning some useful ways to handle my performance anxiety issues, to better understand the phenomenon, and to be able to perform better under pressure. I chose or created nine methods and used each during a decided period of time, each period ending with a performance. Afterwards I analyzed the methods with the help of audio recordings and written concert evaluations to see if it was possible to alter my practicing techniques to be more directly focused on preparing for the concert situation..

With the collapse of the Soviet Union and the 9/11 attacks, the landscape of the freedom of religion has changed. The issues now facing freedom of religion varies greatly from the issues that the drafters of the universal declaration of human rights faced after World War II.In the light of the new issues that States face in the intersection of religion and societal interest, scholars have criticized the European Court of Human Rights to give too much leeway to the States in determining how the human rights should be implemented, by using the doctrine of margin of appreciation. Critics of the margin of appreciation claim that it is based on culture relativism and that the doctrine undermines the universality of the human rights. In order to decide if the margin of appreciation has indeed led to a relativization of the human rights I compared it to the jurisprudence of the UN Human Rights Committee and its use of the Syracusa principles. My conclusion is that the jurisprudence of the European Court of Human Rights cannot be considered to be based on culture relativism.

Due to increasing regulations regarding new diesel vehicles particulate matteremissions the new Scania truck, Scania Euro 6, has been equipped with a particulatefilter. This component effectively stores the particles in the exhaust gas but must becleaned in order to prevent itself from clogging. The filter is cleaned through aprocess named regeneration which is a thermodynamic process in which thetemperature of the filter is raised through fuel supplied to the exhaust gas.The purpose of this thesis is to contribute to the development of improved controlstrategies of the temperature during the regeneration process through thedevelopment of model-based controllers. These controllers are designed in order tohave good performance in stationary as well as automatic regeneration.In order to develop these model-based controllers a model of the system isconstructed. The model is described as a linear thermodynamic grey-box model withflow varying parameters, showing good results in validation.The model provides a simulation environment during the controller design, which isfocused around the development of linear regulators with the exhaust gas mass flowas a scheduling variable whose size determines controllers? mode of operation.

To render outdoor scenes with lots of vegetation in real time is a big challenge. This problem has important applications in the areas of visualization and simulation. Some progress has been made the last years, but a previously unsolved difficulty has been to combine high rendering quality with abundant variation in scenes. I present a method to mathematically generate and render vegetation in real time, with implementation in the scene graph Gizmo3D. The most important quality of the method is its ability to render scenes with many unique specimens with very low aliasing.

The aim of this thesis is to describe the customer?s attitudes toward the contracting for availability, i.e., which factors are from the customer?s perspective necessary for the fulfilment of a supplier-customer agreement? Furthermore, the objective is to describe and analyse a supplier-customer relation in the Defence Industrial sphere.The present study has been carried out as a case study using an abductive approach. The thesis is based on a practical problem, i.e. which factors will be important to the customer when a contractor in the Defence Industry wants to increase its commitment of service, and how will their relationship change? The thesis is above all focused on generating knowledge that can lead to rapid and concrete measures and that can be used in the analysis of an increased industrial commitment but also as a case study of a problem of a more general nature in the Defence Industry.

Svenskt Rockarkiv is an organization located in Hultsfred, Sweden. Its goal is to collect and document the history of Swedish rock music. The archive contains several types of documentation, such as audio recordings, photographs, posters, video recordings and books representing Swedish rock music history. In order to store information about the audio recordings in the archive, Svenskt Rockarkiv uses a SQL Server 2000 database and a client application written in Microsoft.NET C# and Windows Forms. The purpose of this degree project is to audit the database and windows client, since the organization has needs of new functionality.

Introduction: A complex interaction between muscles, tendons, bones, joints and nerves are required for optimal function of the human hand. It is known that an individual?s grip strength is vital for performance of physical demanding tasks such as strength training with free weights. Strength training including a thicker grip around the bar may enhance the strength of the grip in the athlete without other special routines for grip strength development. The purpose of this investigation was to examine the difference in performance in multiple repetitions in two strength training exercises using two different sizes on the bar, to look for correlations between grip strength of the subjects hand and the amount of repetitions executed with two different size of the bar and finally the correlation of hand size and the amount of repetitions executed with two different size of the bar.Method: 15 strength training men (23,9 ± 4,1 years), underwent measurements of hand size, maximum grip strength, 1 repetition maximum (1RM), a 80 % of 1RM weight strength test with two different  bar sizes.Results: The results from the present investigation indicates a 21,1 % reduction of 80 % of 1 RM weight performance in repetitions executed in the bench press with the thicker diameter of the bar and a 66,2 % reduction in repetitions executed with a 80 % of 1 RM weight in the lying bench row with the thicker diameter of the bar.

The interest in tiny wireless applications raises the demand for an integrated reference oscillator with the same performance as the macroscopic quartz crystal reference oscillators. The main challenge of the thesis is to prove that it is possible to build a MEMS based oscillator that approaches the accuracy level of existing quartz crystal oscillators. The MEMS resonator samples which Philips provides are measured and an equivalent electrical model is designed for them. This model is used in the simulations of the Pierce oscillator and the transresistance amplifier oscillator that are evaluated in this thesis. Finally the Pierce oscillator is implemented in the A BCD2 process and manufactured at Philips Semiconductors in Nijmegen, The Netherlands.