The focus of this thesis is primarily in electronic construction and describes the design process for a microcontroller circuit board from concept development to prototyping. The client develops test fixtures for automated testing of products within the electronics industry and needs a new controller circuit for the test fixtures that can handle controls and basic testing. An investigation into the needs of such a system is conducted and a prototype printed circuit board assembly is manufactured.The prototype is developed with focus on protection against electrostatic discharges and overvoltage. Among the functions that are included are voltage measurements, communication interfaces and control of input and output currents. Firmware for the prototype is developed and configured to communicate with a PC through USB interface for control and collecting of measurements..

The project deals with the evaluation and testing of speaker and microphone elements as well as microphone cavity.The first part of the report comprises a comprehensive theoretical part about drivers, microphone elements, and to some extent microphone cavity.The goal was to , on the behalf of the company Limes Audio AB, develop proposals on microphone element and cavity as well as drivers for a speakerphone application, based on specific factors. The main factors were performance, price and form factor.The aim was to create the best possible conditions for Limes Audio's software developers to implement the company's audio-enhancing software, mainly adaptive echo cancellation.The testing was carried out using Adobe Audition and MatLab. The test methods were developed in conjunction with Limes Audio and are described below.The project will result in suggestions for a speaker, a microphone and a cavity. The cavity were removed from the product because the results indicated that the cavity matter little for the end result.The report concludes with a discussion on how the measurements could have been enhanced to simplify the interpretation of the results and making the testing more efficient..

Utbränning är ett högaktuellt ämne i dagens samhälle där fokus ligger på individens prestationer. Denna studies syfte var att undersöka om högpresterande individer bygger sin självkänsla på prestationer och om detta i sin tur har betydelse för utbränning. Ytterligare syfte var att undersöka om utbränning bland högpresterare med prestationsbaserad självkänsla var lika utbrett bland båda könen. I undersökningen deltog 66 tjänstemän från ett tillverkningsföretag i Mellansverige. En enkät sammanställdes av de tre befintliga och utprövade skalorna; Karolinskas utbrändhetsformulär, The Performance Based Self-esteem Scale samt en del av The Jenkins Activity Survey.

In today?s society computers are getting a much more important role. To get a computer to work as intended it has to be programmed. A computer program is written with programming languages. There is an abundance of programming languages available today and there are many differences and similarities between them.

This thesis has been done at the powder department (GH) at AB Sandvik Coromant in Gimo. With a rheometer measurements has been made on raw materials and powder blends. The focus of this report has been to find correlations between raw material powders and press data, comparisons have also been made between raw materials and powder blends.The rheometer can show information of how a powder act in flow conditions, together with air and with pressure. Analyses has been done comparing the rheometer data with press parameters (for example: rejected orders, weight variations and the compaction pressure) with the goal to find correlations between the powders flow properties and the powders compaction in production.The measurements and analyses have been showing that the powder flow properties depends on the powders composition and that properties like flow rate, aeration and permeability varies between powder blends and batches of the same powder sort. It seems to exist a correlation between the pressure force and the flow rate of a raw material.

Energiutvecklingsprojekt är idag mer aktuella än någonsin. För att kunna genomföra så stora projekt som hela fastighetsbestånd, och samtidigt ta hänsyn till lagen om offentlig upphandling har affärsmodellen EPC, Energy Performance Contracting, utvecklats. I samarbete med SIEMENS AB Building Technologies har jag tittat på hur man kan garantera en viss nivå på besparingarna som genomförs. Denna garanterade besparing beräknas mot en uppställd baslinje, som är en beräkning av hur energianvändningsmönstret skulle ha sett ut med dagens förutsättningar om inga förändringar gjorts. Modellen med regression är noggrann och hjälper till att identifiera avvikande användningsmönster..

E.ON Elnät has in their project Operational Performance developed a priority tool forconstruction and operation. The tool will help the users to increase the capability to prioritybetween new development projects and removal of faults. The tool can be seen as a measuringfor different bay?s reliability, size and the community usefulness. The result of the priority isdirectly connected to which calibration that is chosen in the tool.The priority tool is still under development and there is therefore an uncertainty about howsensitive the tool is for changes in the calibration.

Many companies have historically forced their interests through without any thoughts about the future needs of the humans and the society. In the last few years voices have been raised for a change, companies need to take their responsibility regarding sustainable development.The purpose of the report is to describe and explain possible relations between sustainabil-ity performance of companies and profitability, valuation, industry and size respectively.To be able to judge the sustainability performance of the companies Folksam (2006a) have been used. This is a solid investigation of the companies listed on the A- and O-lists of the Stockholm Stock Exchange by the end of 2005. The sustainability marks have been com-pared with the chosen key values for each hypothesis respectively. With this quantitative data as foundation, a quantitative approach and a deductive method have been used.In the first area of the investigation, profitability, the authors found correlation for the main hypothesis between sustainability performance and ?Return on Total Assets? through a statistical test.

Authors: Maria Bergholtz, Alexander WestessonTutor: Daniel EricssonTitle: Performance Measurement of Creative work ? a culture study at PS CommunicationKeywords: Key Performance Indicators, Organizational Culture, Macro-culture, Subculture,Micro-culture, Art, Business, Creativity, PS CommunicationIn the paper?s introductory chapter, the chosen problem area regarding art and business willbe presented. The paper?s studied empirical case will also be introduced here. This then leadsto the reports chosen research questions:How do the company management and the companies? creative personnel approach differ inthe discussion regarding performance measurement on PS Communication?-What causes these differences?What impact does the corporate culture have in the discussion about performancemeasurement of PS Communication?-Is the corporate culture weak or strong?The purpose of this paper is to resolve the stand still in the discussion regarding performancemanagement by creating an understanding of different people active in the organization?sapproach to performance measurement.

This thesis has been done at the powder department (GH) at AB Sandvik Coromant in Gimo. With a rheometer measurements has been made on raw materials and powder blends. The focus of this report has been to find correlations between raw material powders and press data, comparisons have also been made between raw materials and powder blends.The rheometer can show information of how a powder act in flow conditions, together with air and with pressure. Analyses has been done comparing the rheometer data with press parameters (for example: rejected orders, weight variations and the compaction pressure) with the goal to find correlations between the powders flow properties and the powders compaction in production.The measurements and analyses have been showing that the powder flow properties depends on the powders composition and that properties like flow rate, aeration and permeability varies between powder blends and batches of the same powder sort. It seems to exist a correlation between the pressure force and the flow rate of a raw material.

A new theory for predicting the windprofile over a canopy has been evaluated. The theory was first presented by Harman and Finnigan (2007). The theory relies on the forming of a mixing-layer above the canopy, due to different mean wind in and above the canopy. Characteristics from both mixing-layer and Monin Obukhov similarity theory have been used to develop the governingequations that give the wind profile. The theory has been used to calculate wind profiles for sixdifferent atmospheric stabilities.

Aim: The purpose of this paper is to see if there has been a change over time in the performance and in the spoken word of the Swedish cooking programs. By testing the theory of intimization on the cooking programs I get the opportunity to see if the border between the private and the public have become clearer or more difficult to notice, and if the new language, the informal language as intimization entails, has been used in Swedish cooking programs since the 70s until today, or if there´s ever been a formal language in Swedish programs? Method/Material: I'm using a rhetorical approach that includes a three-step analysis. Analysing the context, means to persuade and performance. The empirical material I intend to analyze is Swedish cooking programs from the 70s until today, 2010.

This treatise analysis what functions light has in theater. It was inspired by Rosalinda Krauss essay Sculpture in the Expanded Field but builds mostly on the following three books Linda Essig Lighting and the design idea (2nd ed), Nigel H. Morgan Stage lighting for theater designers and Francis Reid The stage lighting handbook (6th ed). It discovers nine unique functions of light (performance style, dramatic style, image,illumination, 3D space, 3D form, selectivity, environment, atmosphere) and develops a graphical mapping of them based on a mapping by Reid. The functions performance style, dramatic style, image are superior the others.

Today there is no way of measuring or simulating turbulent flow in high Reynolds numberenvironments. The computational power required to simulate these conditions is not expectedto be available for several decades so instead the CICLoPE project aims at solving thisshortage by the construction of a long carbon fiber wind tunnel in which real measurementscan be made. To do accurate measurements it is of importance that the wind tunnel, 0.9 metersin diameter and 110 meters long, is as straight as possible.This master thesis treat the design and construction of a device which may be used to align thetunnel along a reference laser beam. A design is presented which allows the pipe to be alignedwithin about a quarter of a millimeter along its entire length. Contents span over severalscience fields such as physics, mechanics, control theory and electronics.The result is a theoretically correct design.

This essay looks into the concept of self-efficacy and its implications for work performance. The participants in this study work for a call center company situated in the southern part of Sweden. The hypothesis is that a high degree of self-efficacy exerts a positive effect on work performance. Furthermore, the study seeks to identify the factors that give rise to work satisfaction among the participants. The results of the study show that there is a negative correlation between high self-efficacy and work performance.