If a building is heated by a heat pump, it is of high importance that the heat pump has a high coefficient of performance. An exhaust air heat pump extracts heat from the building?s exhaust air. The air has a relatively high and constant temperature all year around, leading to a high seasonal coefficient of performance. This thesis examines whether it is profitable to complement an exhaust ventilation system with an exhaust air heat pump in an apartment block that already has geothermal heat pump, district heating, oil- or biofuel heated system.

In inhalation anesthesia life-support systems are used to provide gases to the patient and to monitor important parameters. These systems are used in dynamic and stressful situations where the information-load on the operators often is significant. This thesis presents a design concept of an anesthetic system. The design goal has been to keep the information-load on the operator low with the objective to minimize confusion and error.A number of contextual inquiries were made in the operating room during surgery at four hospitals in Sweden. The goal was to understand the actual use-situations when anesthetic systems are employed.

In my study, I have chosen to examine how the user interface and content must conform to design guidelines for responsive design makes it suitable for diverse desktop environment and for varied mobile platforms. The purpose of this study is to examine the extent recommended design guidelines based on scientific research has a positive impact on user performance and perception when using this study delivered hi-fi prototype. The goal of this study is to provide a Hi-Fi prototype with high usability that will introduce and inform the public about BrasilCine according specifications. Study findings from user testing and supplementary questionnaires show that the implemented technologies as design guidelines for responsive design and design features have a positive impact on user performance and perception. The study results are therefore relevant for further prototype development..

Modern IT systems tend to become more and more complex, while the number of active systems in companies increases. Furthermore, the number of security-related incidents is at an all-time high. These new conditions impose new demands on organizations. For example, it is no longer possible to manually collect and examine the systems log messages.The purpose of this thesis has been to make a comprehensive study of solutions for automated collecting and managing of log messages, analyze the Swedish Armed Forces specification for solutions for central log collection and management, and evaluating exis- ting solutions. The work consisted primarily of literature studies and evaluations of two of the Swedish Armed Forces of selected products: NetIQ Security Manager and Splunk.

The aim of this master?s project is to explore ways to perform piano music conceived dramatically. I do this through performance of Beethoven?s Appassionata Op. 57 and of Scriabin?s Piano sonata no.

The purpose of this literature review was to investigate how the rearing systems influence the behaviour of dairy calves. Calves are social animals that form groups within the herd where play and social licking between calves are important social activities. Suckling is a complex behaviour and essential for the calf's survival. In the modern rearing systems the calf is usually separated from its mother soon after birth. Calves are then kept in individual pens, group pens or, more rarely, with a foster cow.

This report was written by Lisa Bengtson and Hanna Paradis and describes the degree thesis "Environmental impacts of solid waste treatment in the Metropolitan Region, Santiago, Chile ? a comparison between current system and incineration with energy recovery". The purpose of this thesis was to investigate if incineration with energy recovery could be motivated through an environmental perspective as an alternative to landfilling of solid waste in Santiago, Chile. The study was performed with Life Cycle Analysis as a theoretical base. In Santiago, situated in the thirteenth region of Chile, Región Metropolitana, lives 6,5 million inhabitants. The major part of the solid waste produced in the region is landfilled on three different sanitary controlled landfills situated outside the city center.

When developing software that is meant to be distributed over several different computers and several different networks while still working together against a common goal there is a challenge in testing how updates within a single component will affect the system as a whole. Even if the performance of that specific component increases that is no guarantee for the increased performance of the entire system. Traditional methods of testing software becomes both hard and tedious when several different machines has to be involved for a single test and all of those machines has to be synchronized as well.This thesis has resulted in an exemplary application suite for testing distributed software. The thesis describes the method used for implementation as well as a description of the actual application suite that was developed. During the development several important factors and improvements for such a system was identified, which are described at the end of the thesis even though some of them never made it into the actual implementation.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

This paper investigates the compensation for risk in the context of the Swedish stock market with a special focus on downside risk. Using daily market data collected from the A-list of the Stockholm Stock Exchange between the years 1983 and 2005 the purpose is to answer the question whether Swedish investors are compensated for holding stocks with high downside risk, measured as downside beta. Using panel data analysis it is shown, in accordance with most previous evidence in international research, firstly that stocks with high beta values on average experience higher returns than stocks with low beta values, and secondly that stocks with high downside beta values experience higher returns than stocks with high beta values in general. On the other hand, cross-sectional regression methodology using a bivariate regression approach shows that downside beta does not explain excess returns very well. Instead, regression analysis suggest that high upside beta does a much better job in explaining excess return over this time period compared to downside beta.

The purpose with this report is to make a contribution to Bodycote heat treatments workshop in Värnamo, how to introduce, establish and constantly improve its environmental system. The rapport will help Bodycote with there certifying in ISO 14001: s demand standard. Organizations who continuously work with environmental issues have a lot to gain. Two things an active environmental development process will convey are, building of thrust within the circle of customers, and great financial savings. An increasingly numbers of organizations realize the importance to introduce a functioning environmental system into their activity.

Sweden is considered to have one of the world's highest animal welfare standards in agriculture. Despite this, there are shortcomings in animal husbandry. One example is overcrowding, which is a way to increase stock size without making costly investments in the buildings. It can be carried out systematically to increase profitability or due to, for example uneven calving during the year. The European Commission criticizes the fact that stocking density is not controlled under Swedish welfare inspections.

Försvarets materielverk (FMV) står inför en omfattande ominriktning av verksamheten med tillhörande omorganisation. Den nya verksamheten innefattar att leverera tjänsten försvarslogistik till Försvarsmakten (FM). Då det inte finns någon entydig definition för vad försvarslogistik är så har detta arbete inriktats att utarbeta ett förslag till en sådan definition. Dessutom har en procedur skapats som identifierar relevanta prestandamått för ett godtyckligt försvarslogistiskt system, s.k. Key Performance Indicators (KPI), som kan användas för att påvisa om försvarslogistiken är effektiv eller inte.

This master thesis examines the development of the two earlier independent IR protocols Z39.50 and SR (Search and Retrieve, ISO 10162/10163), now Z39.50/SR, from the beginning of the 80s to 1996 and their functionality in the client/server environment.Z39.50 applications in library systems will allow easy access to information regardless of platform or location. The use of Z39.50 will create a new user environment. Almost all the library systems of the market support the Z39.50 and surprisingly the use of it in Sweden lied on a very low leve! in 1996. This thesis was followed-up by an interview and a questioner among the Swedish Z39.50 users. They could see a huge potential of development concerning the future IR process.

The measuring of logs is important in the sawmills process to the sawn products. The technology of automatic wood measurement is continuance developing. This study has the purpose to see how the different techniques and the routines works of measure frames for determining of wood value and sorting in sawmills. The study is performed as a literature study and a survey. The survey includes some of the Swedish sawmills that produce more than 10 000 cubic meters sawed products per year.