After the mandatory rules for clearing was removed in 1994, the clearing area has increased in Sweden. After the storms Gudrun and Per, the areas became planted with new plants, mainly spruce, but also other tree species. Storm areas are now being invaded by naturally rejuvenated birch in the tilling tracks. Since the birch often is initially growing faster than the spruce it is inhibiting the growth and is also damaging the spruce. The purpose of this thesis is to study the new brush saw with chain and compare it with the conventional clearing saw, mainly in terms of performance and ergonomics. The results show that the new brush saw with chain is very good in almost all clearing operations compared to the conventional clearing saw.

The forecast ability of four well-known exchange rate models for theSwedish krona is tested in this thesis. The models that are tested arethe purchase power parity, the real interest differential model, thesticky-price model and a productivity model. In addition to thebenchmark, the random walk, they are also compared to each other.They are all tested on three different horizons one quarter, two quartersand four quarters. The mean squared forecast error criteria and thedirection of change criteria are used for evaluation of the forecastability. Only in a couple of cases are the forecast ability of thetheoretical based models significant better than the random walk..

The study aims to investigate the feasibility of small-scale electricity production with solar electricity systems, also known as PV (photovoltaic) systems, in Australia. Due to the global warming, sustainable energy has in recent years become an increasingly important issue, both internationally and in Australia. With one of the largest dependencies on fossil energy sources in the world, the country's abundant solar radiation is a possible solution to this issue.Both the technical and the economic feasibility of small-scale PV systems were investigated. On the technological side, the electricity generation, distribution and consumption systems were studied. On the economical side, the parameters that drive the profitability of a PV investment were investigated.

Detta examensarbete är utfört på Saab Training Systems AB i Huskvarna. Saab Training Systems utvecklar, tillverkar och säljer kompletta militära träningssystem.Syftet med arbetet var att minska ledtiderna, då korta leveranstider blir ett allt viktigare konkurrensmedel. Arbetet innebar en kartläggning av nuvarande reserv- och reparationsflöde samt att identifiera problem och komma fram till förbättringsförslag.Vidare har vi studerat reservdelslagrets lagernivå och dess kapitalbindning.Arbetet genomfördes med hjälp av intervjuer med berörd personal, observationer, enkätundersökning samt statistiska studier. Vi har även arbetat med Supply Chain Operations Reference Model som är en öppen referensmodell med vars hjälp man kan kartlägga, förändra och optimera sin verksamhet.Saab Training Systems har som mål att ledtiderna för reservdelsflödet och reparationsflödet skall vara 14 dagar, men i själva verket är det inte så. Dessa ledtider är idag längre, hur långa är dock oklart.De långa ledtiderna beror främst på att i flödena förekommer det mycket passiv tid.

Flowcytometric technology has been widely used for measurement of the absolute numbers of T-lymphocytes subsets in Human Immunodeficiency virus (HIV), defining the disease state, monitoring antiviral treatment, and identifying any risk for opportunistic infections. A manual preparing of the samples is required. More recently an automated and enclosed blood cell counting, Celldyn Sapphire has been introduced. In this study the performance of the Flow cytometer EPICS XL as a reference method for analysis of CD3+, CD4+ and CD8 T-lymphocytes was evaluated with blood from 40 individual?s samples.

This thesis deals with the goods classification of the Nordic alcoholmonopolies, viz. Alko in Finland, Rúsdrekkasøla Landsins in the FaroeIslands, Systembolaget in Sweden, Vínbúðin in Iceland, andVinmonopolet in Norway. The focus of the study is the web pages of thecompanies (as they appeared April 10th 2011) and the printed pricecatalogue of Alko, from which information on class division has beenexcerpted. The emphasis lies on the division into product groups and theinformation about origin. Within these facets, which partly overlap insome of the classification systems, the principles of division and thehierarchical relations between classes are studied.

Optimizing energy systems is, in Sweden, as in many other countries, of growing interest. District heating systems are no exception. In 2012, 285 out of 290 municipals in Sweden had district heating in use and the majority of these systems have a higher return temperature than that which is possible with an error-free substation of day current technology. To, when possible, lower the return temperature is a way of increasing the effectiveness of the district heating system.This study means to investigate, through simulations and calculations, how big of a reduction in production cost a lower temperature in the city of Ystad?s district heating system would correspond to.

In order to facilitate testing of anesthesia machines a patient simulator has been required by Maquet Critical Care AB. A patient simulator has been developed to reduce expensive and time consuming animal experiments and temporary lab arrangements. The patient simulator has been developed and designed to simulate human lungs with regards to anesthetic uptake, production of carbon dioxide and heating and moisturizing exhaled air.The system comprises a container and a test lung to simulate the volume and the dynamic of the human lung. The simulation of uptake of anesthetics has been implemented by pumping a fraction of the gas from the container through a bypass circuit with an active charcoal filter that adsorbs volatile anesthetics. The flow through the bypass circuit is generated by a pump and is controlled by a linear valve.The resulting performance of the patient simulator has fulfilled the requirements.

During 2007 the City of Stockholm installed five grid connected photovoltaic systems. The aim of this master thesis is to quantify the amount of produced energy and recommend routines to collect and analyse production data, to make production data accessible by the public and to gain experience for future installations.The total amount of produced energy until March 2009 is 227 000 kWh, with an annual rate of 150 000 kWh. The expected annual rate was 148 000 kWh.All system owners are positive about their plants and see economical benefits in scaling up such systems.The installations need very little attendance and maintenance, however it is recommended that an alarm function is installed for automatic feedback in case of a system failure. All future systems should be inspected during full operation to determine if the actual capacity is matching the installed capacity..

Six different Digital Proofing Systems from three different techniques have been evaluated as totechnique, printing quality, economy and usability. Digital proof from two paper qualities, coatedand uncoated, has been compared with references printed in offset, to see how good they match eachother. Only two Proofing Systems manage to print on reference paper. The other Proofing Systemsuse special paper for digital proof.Measurements and visuell judgement show that the Digital Proofing Systems visualise referencepictures with quite good quality. Proof optimised for coated paper visualise the colours with goodresult.

The aim of this essay is to examine three separate Swedish public libraries and their respective websites on the grounds of the usability sciences. I firstly had to summarize the main properties of the usability-field in order to gain an extended knowledge of its purposes and possible usage for today?s library systems. I was then able to apply the extended knowledge in the examination of the three library websites and the purpose of determining whether or not they were designed according to the standards set by the usability-sciences.Usability is a rather new science that deals with the dissection and examination of computer-based systems, in order to find the key components that make systems user-friendlier. With user needs being the main focus of its research, usability tries to meet all the different needs of the modern user and construct systems that are less system-centered and more user-centered.

In times of increased flooding, enhanced by climate change, polluted stormwater poses an increased threat to the environment through contaminated water entering waterways. Bioretention utilizes natural processes in soil and vegetation to treat pollutants and combat this threat. Biochar produced through pyrolysis, has a high cation exchange capacity (CEC) and could therefore increase treatment in bioretention systems. This research applies a literature review, interview, and a model to explore the benefits and disadvantages of biochar in order to specify a soil-mix through an understanding of the production process and preferred application rate. High purification through CEC, increased water holding capacity, and carbon sequestration being the benefits discussed.

This thesis examines the effects of proximity operators and query expansion with synonyms on retrieval performance. The queries were expanded with synonyms and structured with proximity operators where the permitted distance between terms varied from 1 to 3. The expansion terms were selected from the online lexical reference system WordNet. Initial query terms were selected from 28 topics that contained compound words and were chosen on the basis of their expandibility. The English morphological analyser ENGTWOL was used for normalization of query terms.

Real-time systems are required to answer to external stimuli within a specified time-period. For this to be possible, the systems behaviour must be predictable. The use of active databases in real-time systems introduces unpredictability in the system, e.g. due to their use of active rules. The behaviour in active databases is usually specified in ECA-rules.

This report is the result of a thesis work carried out on the Risifrutti production at the company Procordia Food AB. The thesis is at a master level and is the final work for the author to receive a Master of Science in Innovative production at Mälardalen University. The thesis comprises 30 credits and has lasted for 18 weeks. The thesis is mainly a research on whether it is possible to perform an Environmental Value Stream Map (E-VSM) in a food processing industry and an evaluation if the tools E-VSM and Green Performance Map (GPM) are useful in this type of industry. An extra part to this research is to use the results from the E-VSM and give Procordia Food AB information on improvement potentials in the Risifrutti production. The author has found it difficult to collect some of the quantitative data to the E-VSM, mainly regarding energy, but by using the Value Stream Mapping (VSM) tool and other Lean tools the author was able to identify and quantify several wastes in the Risifrutti production. Recommendations for improvements based on these wastes have been given to the company. In the research part of this report the utility of the Value Stream Map, Environmental Value Stream Map and Green Performance Map in a food processing industry have been analyzed. The author has found that the Value Stream Map has been a useful tool since waste and unevenness in the tact of the production has been identified. The Environmental Value Stream Map and the Green Performance Map are also great tools when a company wants to analyze their environmental impact and then invest in environmental improvements. However, no profound energy analyzes has been done in the Risifrutti production because of the lack of energy meters for steam, electricity and compressed air in the production lines..