The purpose of this master thesis is to evaluate how internal vehicle information inScania buses and trucks can be used for evaluation of driver performance regardingfuel economy, vehicle wear, traffic safety, emissions and cargo damage. To someextent it was examined whether this information could be used for training the driverto a better driving style. In addition, a prototype for such a system was developed.By first defining what distinguishes a talented driver and how he/she differs from apoor driver, followed by a study of the internal vehicle communication, a system thatin real-time gathers and interprets vehicle data could be developed.The resulting system can with reasonably high reliability detect a number of trafficevents (such as braking, lane changing or hilltops). At each such event, the driver?sbehaviour can be evaluated.

This study has examined if importation of waste for energy recovery can reduce the climate impacts of Waste Management Systems. Using Systems Analysis this study will try to examine the complex waste systems in a systematical and strictly logical way to see how these systems interact and affect each other. Specifically examining the climate impact of waste management systems in England. The traditional way of handling waste in England is through Landfills. Land filling leads to emissions of the greenhouse gas Methane. The EU has put in place a landfill directive that is supposed to lead the member states away from land filling as a method of waste management. Today in Sweden there is a competition for the waste available for incineration. The worsening economical situation together with less product packaging and an increase in source separation leads to a lack of waste available for incineration.

This paper describes how files and information can be shared in organisations and workplaces. We studied and compared the traditional file sharing in Microsoft Active Directory and the Social file sharing that comes with Microsoft SharePoint Sites. We used qualitative studies based on interviews with system administrators, management and by our own observations to acquire the necessary data. Using independent research, we were able to analyze the data and show the general difference between the traditional and the social file sharing systems. Social file sharing enables the user to easily store and share files in a flexible online environment.

In this report statistics concerning the reliability of sprinkler systems from seven countries has been analysed. The objective of the report has been to determine the reliability of sprinkler systems in Sweden and to present suggestions on measures to increase the reliability. The main conclusion that has been drawn is that the reliability of sprinkler systems in Sweden is 92 percent according to the analysis of Swedish statistics, and that this figure finds support in statistics from other countries. Further results are that the quality of design, installation, maintenance and inspection of sprinkler has to be improved and that the Swedish incident report has to be revised..

The thesis has been carried out in cooperation with Master Flow AB, Västervik owned by the EWEBE Group. The company produces and sells hot runner systems that are tailor made for the customers.The problem that MasterFlow AB has encountered is in the construction of complex hot runner systems in SolidWorks. With several different lengths, fronts and endcaps that builds the nozzles of the hot runner systems, is affecting the problems for MasterFlow AB. The purpose of this work is to automate the design of hot runner systems so it does not overload the CAD-system SolidWorks.To gain an understanding of the problem, there have been several studies and observations at the company, where the focus has been on how the work is done with the design of hot runner systems. By using help from the corporate management, enough information has been collected to find a solution to these problems.The implementation of design automation has been based on a flowchart that was created.

This report is the result of a diploma work made at IMT at US in Linköping. The purpose of this piece of work is to investigate the possibility to design a general program for data-acquisition using LabVIEW, suiting different hardwares and connections. Great importance has been attached to communication with serialport, using bluetooth, because different wireless PPG-instruments has been developed parallel to this project. These PPG-circuits uses this type of serialcommunication. Communication with USB, GPIB and analog connection has also been examined and analog communication has been tested practically.

When constructing a new house many questions appear, from architecture to decisions regarding installations. Sweden is situated in a cold part of the planet and questions regarding which heating system to install face everyone who decides to build a new house. This thesis describes a construction solution of a villa in Kiruna. The extended essay analyzes which heating system is most suitable for the construction. The options are geothermal, district and pellet heating systems.

This thesis reports on the methodology and results of a study with one retailers 73 units to investigate factors of the store managers leadership that influence productivity performance in store. The study determine the impact of ten independent variables in terms of the store managers leadership on four performance measures: (3) three productivity measures: Sales Over Labor (SALOL), Sales Over Inventory (SALOI) and Sales Over Square-metre (SALOS) and (1) one profit measure: Contribution Income Over Square-metre (CIOS). The result shows that the leadership factors give no more explanation to the economic results after factors of local market condition and the store attributes are taking in to account. The store manager's leadership can though influence his or her decision-making in-store. The store manager's decision to staff the store more intense (higher service-intensity) can increase the level of contribution income over square metre in-store..

Real-time systems are required to answer to external stimuli within a specified time-period. For this to be possible, the systems behaviour must be predictable. The use of active databases in real-time systems introduces unpredictability in the system, e.g. due to their use of active rules. The behaviour in active databases is usually specified in ECA-rules.

Real-time systems are required to answer to external stimuli within a specified time-period. For this to be possible, the systems behaviour must be predictable. The use of active databases in real-time systems introduces unpredictability in the system, e.g. due to their use of active rules. The behaviour in active databases is usually specified in ECA-rules.

Real-time systems are required to answer to external stimuli within a specified time-period. For this to be possible, the systems behaviour must be predictable. The use of active databases in real-time systems introduces unpredictability in the system, e.g. due to their use of active rules. The behaviour in active databases is usually specified in ECA-rules.

Real-time systems are required to answer to external stimuli within a specified time-period. For this to be possible, the systems behaviour must be predictable. The use of active databases in real-time systems introduces unpredictability in the system, e.g. due to their use of active rules. The behaviour in active databases is usually specified in ECA-rules.

Real-time systems are required to answer to external stimuli within a specified time-period. For this to be possible, the systems behaviour must be predictable. The use of active databases in real-time systems introduces unpredictability in the system, e.g. due to their use of active rules. The behaviour in active databases is usually specified in ECA-rules.

Real-time systems are required to answer to external stimuli within a specified time-period. For this to be possible, the systems behaviour must be predictable. The use of active databases in real-time systems introduces unpredictability in the system, e.g. due to their use of active rules. The behaviour in active databases is usually specified in ECA-rules.

Real-time systems are required to answer to external stimuli within a specified time-period. For this to be possible, the systems behaviour must be predictable. The use of active databases in real-time systems introduces unpredictability in the system, e.g. due to their use of active rules. The behaviour in active databases is usually specified in ECA-rules.