Sekretessbelagd.

In today?s fast growing and closely connected society, a reliable and energy efficient transportation system is more than ever desirable. Nowadays the significant part of the transportation sector?s energy demand is supplied by fossil fuels.Improving energy efficiency in combustion engines will result in reduction of fuel consumption and CO2 emissions. A modern internal combustion engine has an efficiency of 30-45 %, where the most energy loss occurs as result of heat losses in the exhaust and cooling systems.

This thesis aims at investigating the two municipality?s Gislaved and Ljungby. Where the aim is to see if there is any connections, between the type and the degree of public-private partnerships, and the municipalities obtained environment performance. In this essay the starting point is that the environmental performance in the chosen municipalities is good.Interviews among local politicians and representatives for the municipalities plastic industries, has functioned as a way to test the hypothesis. Gislaved and Ljungby have thereafter been compared, in order to see if there is any similarity in the sort and the degree of public-private partnerships, and how that will affect the environmental performance. The overall questions in this essay are:How can the cooperation among the chosen municipalities and the      local business life be described? What kind of Public-private partnership      exists in the selected municipalities?Is there any difference between the municipalities, referring to      the degree of cooperation between the municipalities and the local      business life? Does the degree of cooperation affect the progress on the environmental      performance? The end result shows that the local business life doesn?t have any impact on the environmental performance.

This thesis has been carried out in New Zealand in collaboration with the University of Waikato. In association with Dr. Mike Duke the purpose of this work is to investigate whether two different software for modeling of photovoltaic systems are useful in the teaching of solar energy.The next ten years grid-connected photovoltaic systems are assumed to increase and therefore also a rising demand for people with engineering knowledge are to be predicted. For engineer students with a focus on solar energy a more practical teaching with design software´s can be a good method to make the students comprehend more when it comes to large scale photovoltaic systems and be more prepared for working life.The software´s used is called Transient System Simulation (TRNSYS) and Photovoltaic Systems (PVSYST) which are both well used throughout the world. To assess the reliability of the software´s, a reference solar power plant at 16.1 kWp installed capacity are used, which consists of photovoltaic modules from four different manufacturers.

This report is about a thesis that is performed in and for SYSteam Engineering AB in Motala. The thesis work is divided into three parts, study of the market, programming and electronics. The study part consists of examining and comparing different data acquisition systems for testing of different circuit boards, taking into account the modularity, real-time applications, mobility, environmental, interface hardware and software, to be able to define a general module-based data acquisition system in both hardware and software that enables for future developments.The programming part consists of getting started with Visual Studio, which integrates the Measurement Studio for C#. NET. Measurement Studio includes classes and user controls for testing and measuring and offers tools for acquisition, analysis and presentation of real world data.

This paper investigates the relation between stock performance and owner share retention in Swedish public equity listings during 2009 to 2013. The listings during the period are studied and divided into binary groups of "exits" and "non-exits", which are used in a statistical regression model to determine if there is a significant difference in average stock performance. The study finds that stocks of exit-companies on average significantly underperformed stocks of non-exit-companies during 2009 to 2013. Nevertheless, due to the limited number of observations available and the unusual market conditions, caution is required in interpreting these results..

The purpose of this study was to describe the school situation of adolescents who were subject to multisystemic therapy in Sweden, and also if a change could be measured after treatment. Factors that preceded the need for treament were also investigated. The sample consisted of 83 adolescents, boys (65 %) and girls (35 %), with an average age of 14 years. The method used was a secondary data analysis using pre-treatment- and post-treatment data collected from a 7-month follow-up conducted by Lunds Universitet. Results showed that the adolescents were low in school performance and high in truancy at pre-treatment.

To be able to measure high-surge voltages and transients with short rise times youneed measuring instruments with a high sampling frequency and large Bandwidth.These surges and transients occur primarily at lightning but can also occur at forexample at connecting errors at an electrical switch-gear. This report describes thework with finding two solutions for measuring and log data from these surges andtransients. One temporary solution where a measurement program has beendeveloped. A second solution where different company solutions have been analyzedto decide which fits best. For these measurement solutions two solutions for bringingdown the voltage has been used.

Today wireless transmission of data is becoming more and more popular and the need for faster transmission rates is increasing. Since the bandwidth is limited it is important to try to use it to the fullest. CDMA is a technology that allows multiple accesses on the same frequency and time thus making it very bandwidth efficient. The CDMA technology was first introduced in the second generation?s cellular systems but has since then been improved and is reused in today?s 3G systems as Wideband CDMA.

We have performed a study much similar to Ritter?s (1991) about long-term aftermarket performance of IPOs on the Swedish market during the years 1990 to 2002. The study resulted in evidence for that Swedish IPO do underperforms their benchmark-portfolios during a 36-months period. Though, the grade of underperformance depends of the chosen benchmark. The study is mainly focused on a particular benchmark, a portfolio of non-issuing firms matched by size and sector.

The aim of this thesis is to analyze and explain the similarities and differences in management control between a private and a public primary care company. A comparative case study was developed based on one public and one private primary care company in Stockholm County Council. The framework of Otley (1999) was used to define and limit the area of management control systems, according to his five factors. For the analysis of the empirical results Hood's (1995) seven doctrines of New Public Management was applied, and customized to fit the purpose of the study. The results indicate that the differences between the two organizations are very limited.

The study aims to investigate the impact of industrialised homebuilding in the creation of the aestheticproperties of the dwelling architecture.The concepts of industrialised homebuilding and the aesthetic properties of the dwelling architecture aredefined by previously developed models. In these models, industrialised homebuilding is described byeight characteristic areas. The aesthetic properties of the dwelling architecture are described by sevenaesthetic qualities.The study was conducted as a qualitative study, and in-depth interviews were conducted. The companyJM AB is the analysed unit that the author of this report has chosen to study. JM employees and by JMhiredarchitects were interviewed.The report concludes that characteristic area planning and control of processes are considered to havepositive impact on the aesthetic qualities if the process is designed in such a way that the creations ofthese are admitted.

The borehole heat exchangers of today suffer from poor thermal and hydrodynamic performance. The purpose of this thesis is to improve the performance of ground source heat pump systems and thermal energy storages by increasing the energy efficiency of the borehole heat exchangers. For this reason, the annular coaxial borehole heat exchanger (CBHE) has been analyzed. This type of heat exchanger is interesting in terms of both thermal and hydrodynamic performance. A model has been set up in the program Comsol Multiphysics in order to investigate the heat transfer characteristics along the borehole.

There have been, in some rare cases, difficulties with clamping of inserts with U-holesin their tool holder. According to the complaints, the inserts could not be properlyclamped or could fracture when clamped. A study has shown that variations inclamping behaviour are mainly depending by the position of the screw hole in the toolholder and the centering of the screw hole in the insert.The focus of this project has been the centering of screw hole in insert. It has beenshown that the screw holes are not always enough centered in the insert. Theproblem may occur after a certain step in the production, i.e.

Free Space Optics (FSO) has received a great deal of attention lately both in the military and civilian information society due to its potentially high capacity, rapid deployment, portability and high security from deception and jamming. The main issue is that severe weather can have a detrimental impact on the performance, which may result in an inadequate availability. This report contains a feasibility study for an all-optical free-space link intended for short-range communication (200-500 m). Laboratory tests have been performed to evaluate the link design. Field tests were made to investigate availability and error performance under the influence of different weather conditions.