AIMS AB is a Swedish company that develops and sells inertial sensor systems. A new product is under research which basically is an aided inertial navigation system where unwanted drift is eliminated. This can be done by integrating a GPS reciever into the system and fuse measurement data from GPS and IMU. Such a product is useful in racing, where engineers always are searching for the optimal performance and the shortest lap times. Today the only feedback the engineers and mechanics get from their work is the driver?s comments and lap times.

In this master thesis outage statistics covering tree years from two distribution grids are analyzed with the purpose to deduce which factors yield outages. The statistics are extensive therefore allowing in-depth analysis of both customer and system related factors. From this starting point and as a model of explanation energy not supplied is studied as the consequence and the measurement of the inconvenience caused by outages. Different methods for calculating energy not supplied are developed and studied and put in comparison to the method used in Network Performance Assessment Model, which is the Swedish frame work for regulating electricity distribution.Analysis of the outage statistics show a relation between the type category of customer and outages that can be deduced to the variance and the density associated with that customer category. Prioritization of different customer categories is elevated also in this aspect.

Rapid Granulator is one of the world's largest producers of granulators, which is a kind of grinderwho grinds discarded plastics to granules which later can be reused when pressure molding plastics.The company wanted help in developing a new, or alternatively extending their previous,measurement equipment. The old equipment was hard to use, required changes in the code fordifferent measurement scenarios and had a limited array of measuring quantities. Rapid had an ideaof a similar concept only with a greater number of input ports, better range of applicable sensors andan advanced yet easy to use interface. The system is supposed to be placed at Rapid's test departmentwhere it will be used as a tool for finding faults and provide data which can be used for furtherdevelopment of the granulators.The project's members accepted the task and immediately began searching for suitable componentsfor the system. After the search was completed a list of costs, limitations, sensors, I/O's anddevelopment environment was presented to Rapid's staff.

Micronic Laser Systems AB produces and develops machines for the photo mask production market. One of their products is the Omega machine which exposes photo masks using 5 laser beams simultaneously. It is important that the distance between the each laser beam, the x-separation, is the same. The x-separation is today measured by exposing a photo mask with a certain pattern and thereafter measured with a metrology system. This takes to much time and it is desired to find a faster method to measure the x-separation without loosing precision.The task for this master thesis is to improve an existing measurement method which uses a calibration mask.

In industrial control systems PID-control remains the prevalent strategy, also for processes that would benefit from model based control. The purpose of this thesis is to evaluate whether model based control can be readily implemented in an industrial control system. To this end a simulated surge tank with a simulated industrial control system is studied. For evaluation two scenarios with specified objectives are selected.Following a review of LQR and versions of MPC, Predictive Functional Control (PFC) is considered the most suitable for implementation. PFC is a form of MPC developed with industrial applications in mind and therefore has several advantages for implementation in an industrial control system.

Titel: Uppföljning och styrning av lagerproduktion ? Ramverk, mätsystem och individualiseringsmodell Författare: Peter Gunnarson och Daniel Hallbäck Handledare: Adj. prof. Stig-Arne Mattsson, Institutionen för teknisk ekonomi och logistik. Prof.

The purpose of this study is to examine the difference between three query strategies with respect to retrieval effectiveness. The thesis aims at examining how two types of noun phrases containing a modifier to the head word, which is a noun affect the retrieval performance with regard to recall and precision. The noun phrases in the thesis are of two types: 1) noun phrases containing a modifier to the head word (which is a noun) and which are not dictionary phrases (NF) and 2) dictionary phrases. Both types of noun phrases in this thesis contain at least two words. The queries were executed in Query Performance Analyser, QPA, containing the InQuery system and a sub collection of TREC-Uta documents with its topics.

When developing software that is meant to be distributed over several different computers and several different networks while still working together against a common goal there is a challenge in testing how updates within a single component will affect the system as a whole. Even if the performance of that specific component increases that is no guarantee for the increased performance of the entire system. Traditional methods of testing software becomes both hard and tedious when several different machines has to be involved for a single test and all of those machines has to be synchronized as well.This thesis has resulted in an exemplary application suite for testing distributed software. The thesis describes the method used for implementation as well as a description of the actual application suite that was developed. During the development several important factors and improvements for such a system was identified, which are described at the end of the thesis even though some of them never made it into the actual implementation.

PURPOSE: By analysing collected data using theory, we aim to interpret the design, implementation and the usage of BSC in NPO?s to be able to contribute to the research. METHODOLOGY: A case study design has been made through semi-structured interviews and backed up by a quantitative survey and internal documents. THEORETICAL PERSPECTIVES: Based on the sources given from the creators of the scorecard together with some sceptics and some followers, we have outlined the bases of balanced scorecard. To map out the non-profit sector and its strategic needs, the theories have tried to settle the specific need for the strategic tool given.

An important process for grid companies in order to reduce power losses in electricity distribution grids is to figure out where and how they appear. This report describes the factors that cause power losses in low voltage distribution grids and methods for how they could be measured and analyzed. Measurement data for consumed and injected energy were collected for twelve low voltage distribution grids owned by Gävle Energi AB in order to analyze the size of the power losses and how the measurement uncertainty affects the collected data. Then models of three of the grids were created in MATLAB in order to analyze the data and the power losses were calculated to be compared to the collected data. Curve fitting were also used as a method in order to analyze the power losses from collected data.The results show that the losses in the studied grids are low.

Title: The Relationship between Internationalization and Firm Performance Seminar date: 5 June, 2008 Course: Masters thesis in Business Administration, Programme for Managing People, Knowledge and Change, 15 University Credit Points (15 ECTS). Authors: Cheng Hsun Chiang and Márton Pap Advisor: Dan Kärreman Key words: Internationalization, Performance, Multinationality, Degree of Internationalization (DOI), Country of Origin Purpose: To illuminate various crucial aspects of internationalization by systematically contrasting the different models of the multinationality-performance relationship and searching for underlying reasons. Methodology: Meta-analysis on previous theoretical and empirical research. Our emphasis in this paper has been put on the qualitative aspects of the previous research unlike many other conventional meta-analyses that focus on the comparison of the empirical data. Theoretical perspectives: Five main models have been developed by earlier studies to describe the relationship between internationalization and performance: positive linear, no or ambiguous relation, inverted U-shaped, standard U-shaped and S-shaped curve.

Ribs from sheep, goat and pig are rarely assessed  to species due to the fact that they are very similar in their morphology and size. The ribs are instead considered unidentifiable although it is possible to see what kind of bone it is. If these ribs would be identified to species not only would species assessment degree of archaeological source material   increase, the relationship between meat-rich and meat poor regions would change.To find out whether there are morphologically measurable differences between sheep, goat and pig ribs, three measurement points on each rib has been defined and measured. At each measurement point two measurements were measured, one medial-lateral measurement and one cranial-caudal measurement. The ratio between the medial- lateral measurement and the cranial-caudal measurement was calculated for each point.

The purpose of this thesis is to examine the performance of queries that are expanded by 1 inflections, 2 compound splitting and 3 inflections and compound splitting combined. For compound splitting, the morphological analyser SWETWOL was used. Queries were executed in the Query Performance Analyser, QPA, containing the InQuery system. Query terms were selected from 29 topics, all of whom containing at least one compound word. Both the queries and the documents were in Swedish.

The aim of this thesis is to examine how salesperson control can be exercised in a retail store environment. A case study has been performed on a Swedish fashion company emphasizing the relationship between the company?s upper level management and their retail store operations in order to describe, analyze and classify the prevailing management control mechanisms. The paper presents an agency theoretical approach to the relationship applying behavior- and outcome based control theory, performance measurement theory and incentives theory in order to give a comprehensive image of the control system. The main finding is that the company?s management control system as applied to the sales force in its retail stores can be categorized as mainly behavior-based despite several explicit outcome-based features..

AbstractTitle:The Impact of Management Control Systems on the Purchaser Function - A study of Scania and Sandvik Authors: Mohammad Reza Akhbari and Johanna Sullivan Svensson Published: 2011 Keywords: Management control, purchasing function, impact, control, control instruments, Key Performance Indicators, measurement, communication and organizational structure. Background and problem formulation: In order for a company?s business idea or vision to be fulfilled, the management of a company needs assistance from various means to intentionally affect the operation in the desired direction. Management control concerns activities of both financial and non-financial character in order to implement the strategy of a company and to reach profitability. Since the purchaser function is responsible of spending 50 percent of a company?s total revenue, the function has an optimal starting point to be a key actor in the shaping and execution of a company?s strategic plan.