The comprehensive purpose of this Master of Science thesis is to examine which fleetmanagement services for engineering vehicles, ?Fleetech? preferablyought to develop inorder to reach a broad market and meet the demands of contractors.Scanty explained, fleet management is the management of a company's vehicle fleet and theservices can include a range of functions such as driver management and fuel management. Inshort the thesis encompasses four sections:1.Survey of the general contractor industry: The survey has been preformed toevaluate the potential size of the market for fleet management services in the generalcontractor industry.2.Needs analysis: The needs analysis aim was to define what contractors tasks andgoals are, and to determine what functions they want and need from a system.3.The use of CAN and the technical premises: The prerequisite for developing asophisticated and generic system is that vehicle data can be accessed from the CANbuss.The use of CAN standards in construction equipment has therefore beenexamined.4.Specification: An explicit set of requirements have been set to be satisfied by a fuelmanagement service, based on CAN standard protocol J1939.Important conclusions: The use of CAN protocol standards are extensive and the prerequisitesfor developing elementary and CAN based services good. The services should be compatiblewith different manufacture?smachines.

The Energy Performance Certification in Sweden was developed as a tool to achieve the Government's target to reduce Sweden's energy consumption by 20 percent by 2020. The Energy Performance Certificate has previously received some criticism for not fulfilling its purpose. Questions that formed the basis for this report is how the energy performance certification provides support to buyers of single-family houses and if the energy performance improved in terms of reliability. The report begins with a background description that describes how the energy declaration works and some of the findings of previous evaluations and surveys. A survey to investigate the broker's position to energy performance have been conducted as well as interviews with buyers and sellers of houses. An investigation whether the energy performance can vary between different calculation programs, depending on various assumptions made by the energy declarant, has been made.Brokers and sellers have proved negative attitudes towards energy performance, particularly brokers.

This master thesis project at KTH is performed in the Mechanical and Aerospace Engineeringdepartment at University of Florida (UF). The thesis is a small part of a gas turbine researchproject where a vapour absorption refrigeration system (VARS) and a high pressure regenerativeturbine engine (HPRTE) are integrated together. The main objective is to build a computermodel of the VARS. The computer model is supposed to be used to analyse the off-designperformance of the VARS and should also be easy to integrate as a subroutine in a more complexsystem model. To model the VARS some knowledge of the absorbent/refrigerant mixture had tobe well known, in this case a mixture of ammonia and water.

Under 1990-talet kom Kaplan och Norton fram med styrningsfilosofin balanserat styrkort som innebär att managers uppmanas att inte enbart ta hänsyn till finansiella mått utan bör använda sig av både finansiella och icke-finansiella mått för att kunna styra företag. Det här konceptet med balanserat styrkort har sedan det togs fram utvecklas och i början av 2000-talet finns den tredje versionen av balanserat styrkort som tillsammans med avancerad teknologi bildar konceptet business performance management. Det innebär att den information som ligger till grund för de rapporter som består av finansiella och icke-finansiella mått hämtas från en central databas i det verksamhetsöverskridande business Performance management systemet. En anledning till det är att business performance management knyter samman balanserat styrkort med avancerad teknologi som möjliggör att managers därmed har möjlighet att få tillgång till en gemensam version av verkligheten, det vill säga en gemensam mental bild hur företaget presterar. Dessutom möjliggör den avancerade teknologin att managers oavsett om beslut tas som är strategiska, taktiska eller operativa att de har tillgång till den information som beslutsunderlagen baseras på i rätt tid.Den information som beslutsunderlagen baseras på måste bestå av en tillfredställande god kvalitet för att möjliggöra att managers tar korrekta och optimala beslut.

Two of Swedens´s major banks, SEB and Handelsbanken, which appears in the same industry and have similar strategy. Both banks can achieve a similar result despite the fact that their reward system looks quite different. An issue that arises from this observation is the relative reward system to the rest of the economy control system.Our purpose of this paper is therefore to examine the reward system in the organization's financial management systems. We wonder if the reward system may be a function of economic control system, or part of the system, or perhaps made independent of the system and then gradually adapted?In our study, we choose to assume a reward system has three functions to manage, motivate and compose the employee group.

As a result of global competition, companies within the automotive industry are required to improve their production systems to achieve sustainable and competitive production. To attain operational excellence, companies have adopted concepts like lean and World Class Manufacturing (WCM).In order to deliver, companies need to increase the availability and reliability of production equipment. This demands focus on both operational and strategic maintenance, and efficient equipment acquisition and management. The main objective of this thesis is to identify processes and success factors that are necessary for improved maintenance performance. By conducting a case study and by performing a literature review, the following has been studied: 1) how companies within the automotive industry work with maintenance and maintenance strategies, 2) implementation of maintenance strategies, and 3) new acquisition and spare parts management for maintenance. The results show that basic maintenance concepts and related terms are well defined in the literature.

Application Lifecycle Management (ALM) is a genre of computerized systems which allows system development corporations to efficiently and more easily manage, maintain and handle the applications lifecycle. These ALM systems have a wide variety of tools which can be integrated to enable and support collaborative work, while they act at the core of the organisation. Todays ALM systems support flexible system development methods throughout the entire development process. This paper focuses on a case-study of a Swedish business- and technology corporation and their use of two ALM systems with an aim to unravel the differences between these systems and their functionality to serve as a basis for decision making regarding their utilization of best practice with their ALM-Systems. Meanwhile we studied their approach to ALM systems to see if they were using them according to the initial idea of ALM systems.

The purpose of my essay is on one hand to research and evaluate the measures that one intermediate school in Sweden, uses in order to prevent bullying and stop it in the event that one pupil happens to get bullied or harassed. In other words, I would like to show how that school is capable of creating a safe environment. Qualitative research is used to obtain these findings.On the other hand, I also wish to examine what pupils at the school think about these measures and how they perceive the attitudes of the school?s teachers and management regarding the prevention of bullying. In order to acquire this information quantitative research is used.The conclusions that I draw after conducting my research are as follows:1- Regarding the ?Anti ? bullying Performance Plan?, my essay shows that school teachers and management actively work in order to maintain a safe environment and as a result bullying is successfully prevented the school.

The Ericsson AXE-based systems are programmed using an internally developed language called Plex-C. Plex-C is normally compiled to execute on an Ericsson internal processor architecture. A transition to standard processors is currently in progress. This makes it interesting to examine if Plex-C can be compiled to execute on the JVM, which would make it processor independent. The purpose of the thesis is to examine if parts of the run-time environment of Plex-C can be translated to Java and if this can be done so that sufficient performance is obtained.

This thesis presents the implementation of a knowledge base system for rough sets [Paw92]within the logic programming framework. The combination of rough set theory with logic programming is a novel approach. The presented implementation serves as a prototype system for the ideas presented in [VDM03a, VDM03b]. The system is available at "http://www.ida.liu.se/rkbs". The presented language for describing knowledge in the rough knowledge base caters for implicit definition of rough sets by combining different regions (e.g.

This examination paper is a lead in the educational program Industrial Management at Jönköping University. The paper itself contains an analysis of the warehouse organisation and its efficiency at the furniture company Voice AB in Torsvik, just south of Jönköping, Sweden. The report also contains propositions to raise the level of efficiency in the company warehouse and warehouse management.In the investigation of the warehouse a number of possible improvements were found. Examples are lack of a system for labelling shelves and racks, lack of an efficient location system and development possibilities in work routines. For the empirical investigation both qualitative and quantitative methods ware used.

Talented people are recognised as being the most important corporate resource over the next twenty years and a competitive compensation system is an important tool in attracting and retaining talent. Traditional pay systems are recognised as being neither cost effective nor motivating people to do more. Often these systems do not contribute to strategic objectives. This study outlines what constitutes an intelligent remuneration system that will enhance the mind value added by knowledge workers, reward knowledge creation, and contribute to organisational strategies..

The safety and safety work on OKG, Oskarshamns Kraftgrupp, is supervised by SKI, Swedish nuclear power inspectorate. The task of SKI is to inspect that the nuclear power plants of Sweden runs in a safe way. The proprietor of the permit who runs nuclear power plants has the responsibility to maintain the required safety to run a plant. SKI publishes a number of statue books that OKG has to meet to be able to run the plants. SKI recommends in SKIFS 2 004:1, that OKG work with the safety requirements of IAEA.

When the independent upper secondary schools were started in 1992, it meant a change in the competitive relationship for the local upper secondary schools. A reduced number of students during some years ahead, while the number of independent upper secondary schools increase will probably result in tougher competition between upper secondary schools.The purpose of this study is to review and compare financial and performance management between a public and an independent upper secondary school. The dissertation will focus on the now existing competitive relationship between the two types of upper secondary schools.The theory underlying the study is Porter's model - five competitive forces. The model is applied to the local upper secondary school and used to identify competitive factors affecting upper secondary schools. The study is using a qualitative approach with five interviews at two upper secondary schools, one independent and one public, located in the same town.The comparison of financial and operational management of upper secondary schools indicate that the differences are not as great as we first imagined, but that there still are some differences.

This report is based on a thesis that was carried out during spring 2012. The report covers the development of a preliminary study to Performance Sk8. The purpose of the study is to facilitate and contribute inspiration to Performance Sk8 to run an automation project to bring home their production to Sweden from China. The reason is to gain a greater ability to control quality, produce smaller batches and reduce the cycle time to reduce costs.The goal is that the preliminary study shall meet the requirements and wishes Performance Sk8 and other partners defined. The pre study will contain different cost proposals for the automation of selected process and serve as a basis for procurement of the equipment.The pre study has resulted in some proposed solutions to the various steps required to automate Performance Sk8 ?s production.