To build high-rise buildings made of timber has for long been limited by national laws, due to the lack of knowledge in engineering solutions. Frame structures made of wood has for a long time been associated with major fire hazards and consequently lower safety and this connection is still being made today. The increased environmental awareness in recent years has contributed to the exploitation of indigenous building materials, including wood from our own Swedish forests and has become increasingly common. Increased knowledge about how structures behave in fire and how they can be protected in order to achieve safe timber structures has resulted in a growing interest in these structures in the construction industry. Research in the area is constantly updated and new laws allow any number of storeys in wooden buildings in Sweden as long as the performance requirements are fulfilled.The main part of this work has involved calculations of the fire resistance and load bearing capacity of floor and wall constructions.

The Swedish building and property management sector are responsible for about 30 % of the total energy use. In order to take environmental consideration, different environmental assessment tools and standards are used. Miljo?byggnad, Svanen, FEBY12 and PHI are some of these. There has been increased interest to certify buildings and therefore it is of interest to evaluate the assessment of the energy field to see if relevant energy aspects are assessed.

Today?s globalisation has opened up borders between countries as can especially be seen with the opening of the European Union. This has increased possibilities of communication and transportation, which has provided companies with greater expansion opportunities throughout the world. However, difficulties may occur when companies choose to establish abroad, for instance when French companies establish in Sweden through subsidiaries, the lack of knowledge and understanding, when it comes to the business culture, customs, and values within the host country, as well as the culture and the structure within the company, may contribute to misunderstandings and inability to work in an amalgamated manner. These barriers are a cause of unsuccessful penetration within foreign markets.

Optimizing energy systems is, in Sweden, as in many other countries, of growing interest. District heating systems are no exception. In 2012, 285 out of 290 municipals in Sweden had district heating in use and the majority of these systems have a higher return temperature than that which is possible with an error-free substation of day current technology. To, when possible, lower the return temperature is a way of increasing the effectiveness of the district heating system.This study means to investigate, through simulations and calculations, how big of a reduction in production cost a lower temperature in the city of Ystad?s district heating system would correspond to.

Cooling down the indoor air can be done in several ways. One way is desiccantcooling which will be used at the Stockholm Arena. This method is used in airhandling units that use temperature changes and moisture fluctuations in the air. Oneof the steps is to add heat during the cooling process in order to reduce the relativehumidity of the exhaust air. The air passes thru an adsorptions rotor which thenabsorbs moisture from the supply air.

Increased resource efficiency in an energy system could result in large economic and environmental benefits. Tekniska verken i Linköping AB (Tekniska verken) is responsible for the district heating network in Linköping. Their vision is to create the world?s most resource efficient region. An important step towards this vision is more efficient usage of produced heat, something which could be achieved through integration of a seasonal heat storage in the energy system.

This degree project has been carried out in cooperation with Enertech AB in Ljungby and is pilot study to automating all current manual soldering. The soldering process accounts for a large part of the processing cost in the production of a heat pump. The process is also a quality risk and has a major impact on the lifetime of the final product.The Main task of this project has been to evaluate automation of the soldering process, to develop automation solutions and a principle layout, to draw the design changes required for the automation and to calculate the supposed solution.This pilot study has resulted in a suggested automation solution using laser as a heat source for soldering. Calculations of the solution show that a automating a laser soldering cell is very profitable..

In this project the focus has been on the system for recombination at Oskarshamn 2. The recombining systems have on several occasions switched paths due to low pressure before the last ejector that?s feeding the recombiner. Of the mentioned reason, events and several measuring points have been analyzed in this report since the installation of the recombining systems.In order to prove theories and demonstrate what may be the cause of this problem, we used heat balance calculations by the program Probera. Using the program, we can demonstrate that the catalytic process does not reach the desired temperature with the amount of combustible substance.

As a result of increased energy prices more and more energy-efficient homes are coveted. An energy-efficient alternative is passive houses, which is characterized by an extremely well insulated building envelope that recovers the heat without the use of radiators or under floor heating. But a passive house requires a higher investment cost than a conventional building project, since it will require more construction materials, training of construction workers, greater land area, and long construction period. But the lower operating cost expects to pay back the higher cost of investment. We therefore question how profitable a passive house is in relation to houses built according to modern conventional building techniques.The aim of our study is to investigate the viability of passive houses compared to convent­ional houses.

This final thesis is carried out at BAE Systems Hägglunds in Örnsköldsvik. The mission was to construct and integrate a new semi-active damping unit in the terrain vehicle BvS10. Questions that came up during the process, among others, was how to mount the damping unit to the vehicle in a flexible way without exposing it to unnecessary wears.A generation of the concept is made in 3D using CATIA V5 of a possible solution to the problem. The idea is to weld the unit to the skid girder which is one of the main constructions of the track system. In this way the damping unit will come closer to the track system, which will partly protect it from impacts from below and minimize current problems with breaking forces in the torsion shafts.The complete construction was then analyzed, first by theoretical calculations and then with the FEM-tools in CATIA V5.

Förståelse för hur vätska penetrerar in i kartong är mycket viktig vid bestrykning och tryckning. Det finns flera olika tekniker att mäta vattenabsorptionen i kartong, men vilken information som varje instrument ger eller hur de olika resultaten korrelerar med varandra är inte helt utrett. Syftet med detta examensarbete har varit att besvara följande frågor: - Vilken information erhålls med de olika teknikerna? - Hur korrelerar de olika instrumenten med varandra? - Hur förändras de olika kartongerna med olika ytlim? - Hur påverkar omrullning kartongen? Ytråhetsmätningar visar att kartongen får lägre topografi efter omrullning. Omrullningen förändrar motsidan mera i ojämnheter som ligger tätt medan trycksidan förändras mera i ojämnheter med längre avstånd.

The community Vessigebro, in Falkenberg and its surrounding areas housing one percent of all dairy cattle and two percent of all pigs in Sweden. This means that there is a large amount of manure as a basis for producing biogas in the area. A number of farmers have therefore formed a cooperative named Vessigebro biogas and started the project Green Vessigebro, with the goal of creating the conditions for a more profitable and more sustainable agriculture production.The study deals with the conditions and sale opportunities of the feasibility study Green Vessigebro. The study has looked at the work that was previously carried out for the biogas that could be produced on the farms in Vessigebro, The main pipeline for natural gas on the Swedish west coast and its operators, the Swedish Competition Act , Electricity Act , Natural Gas Act, the District Heating Act , Sustainability Act , previously proposed measures, municipality interest in biogas from Vessigebro , possible collaborations, possible sale opportunities and perform calculations with data from the municipality Ljungby for a suggested transportation of biogas between Vessigebro and Ljungby.The study shows that there are several interesting sale opportunities for biogas from Vessigebro. The production and use of biogas in Sweden is increasing and the trend seems set to continue.

This report has been performed for WSP Construction Design located at Arenavägen 7 in Stockholm. WSP Construction Design is one of the leading departments in Sweden in construction solutions regarding everything from building construction to industrial building. Great competencies regarding steel, wood and concrete constructions are available within the department which is well sought.Crane girders used in the industry are exposed to large loads that vary over time that includes instantaneous lifts and the crane girders movement which lead to the phenomenon fatigue in the crane girder and its ingoing welds. A control of fatigue needs to be performed after a certain lifespan measured in time which in turn is converted to a number of loadcycles. When the number of loadcycles amounts to a greater number the input welds resistance will have been reduced and the rate of utilization thereby increased.

In this project the focus has been on the system for recombination at Oskarshamn 2. The recombining systems have on several occasions switched paths due to low pressure before the last ejector that?s feeding the recombiner. Of the mentioned reason, events and several measuring points have been analyzed in this report since the installation of the recombining systems.In order to prove theories and demonstrate what may be the cause of this problem, we used heat balance calculations by the program Probera. Using the program, we can demonstrate that the catalytic process does not reach the desired temperature with the amount of combustible substance.

Österbyverken is an industrial estate in Östhammars municipality in Uppland, Sweden. Many different activities have taken place on the estate the last 600 years. During the last 15 years both health and environmental studies have been made by different companies. At the most recent study a great increase of metals in Nerån, a river that runs partly through and partly next to the estate, was identified with mass balances. The purpose of this thesis is to accomplish a deepened study about the reasons for the increase of metals in Nerån.