The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

In the last decade, member states of the European Union have adopted a range of measures to decrease the dependency on fossil fuels. This has led to an increased use of biomass in heat and power production. In some countries, the lack of forest resource has led to large scale power producers importing their biomass needs. Due to high energy content and homogeneity, wood pellets have become an internationally traded commodity used for large scale power production. The Baltic States have emerged as one of the largest wood pellet exporting regions in Europe.

The district heating load is seasonally dependent, with a low load during periods of high ambient temperature. Thermal energy storage (TES) has the potential to shift heating loads from winter to summer, thus reducing cost and environmental impact of District Heat production. In this study, a concept of high temperature borehole thermal energy storage (HT-BTES) together with a pellet heating plant for temperature boost, is presented and evaluated by its technical limitations, its ability to supply heat, its function within the district heating system, as well as its environmental impact and economic viability in Gothenburg, Sweden, a city with access to high quantities of waste heat.The concept has proven potentially environmentally friendly and potentially profitable if its design is balanced to achieve a good enough supply temperature from the HT-BTES. The size of the heat storage, the distance between boreholes and low borehole thermal resistance are key parameters to achieve high temperature. Profitability increases if a location with lower temperature demand, as well as risk of future shortage of supply, can be met.

This paper appeals to professionals working with green questions. It intends to create a discussion about which plant species that can be established in a fieldlayer of a naturelike planting on fertile agricultural land. To initiate the essay, a studie of which values that can be connected with an establishment of a fieldlayer was performed . A part of Tor Nitzelius Park in Alnarp, a so called naturlike planting on fertile agricultural land, was used as a model for the choice of species. With the aid of soil values, photos and a list of current species, interviews with four ecologists were performed.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

Phosphorus is the single most potent contributor to eutrophication of freshwater and has also been shown to contribute to the toxic algae blooms in the Baltic sea. The dynamics and paths of losses of phosphorus from arable lands are not fully understood. It is known that phosphorus can be lost directly from plant material to water. In studies where plant material has been subjected to several freeze-thaw cycles, large amounts of phosphorus have been lost. Most studies have been conducted under field conditions, with many factors effecting the measured losses of phosphorus, such as weather and type of soil. This study was performed in a controlled environment without the presence of soil. Instead of soil, small glass beads were mixed with the plant materials in vessels, to make possible homogeneous leaching with water through the mixture of glass beads and plant materials. In this study, clover, ryegrass and dry straw were cut to pieces, approximately 2 cm long.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

LKAB deltar i ett forskningsprojekt som går under namnet ULCOS (Ultra Low CO2 Steelmaking), där det övergripande målet är att minska koldioxidutsläppen med 50% vid stålframställningen. Inom ULCOS innebär ett av delprojekten att chargera delvis reducerad pellets (LRI, Less Reduced Iron) i masugnen. LRI är en produkt som är delvis reducerad till en metalliseringsgrad på ca 65%. I denna studie används nio olika typer av pellets för LRI framställning. Dessa är KPBO, KPRS, MPBO, KPBA, HYL samt fyra nya pelletprodukter som framställs från filtrerad KPC slig i pot furnace anläggningen vid CK-laboratoriet i Malmberget.

This thesis discusses the global regime complex concerning the management of plant genetic resources for food and agriculture, and how different regimes concerning these resources cooperate or stand in opposition to each other. Because of changes in US patent law and the establishment of TRIPS, patent claims over plant genetic resources has increased dramatically globally. This, amongst other things, in turn has lead to the development of CBD which in turn lead to the creation of access and benefit laws in many countries. To create a free flow of genetic resources for food and agriculture the ITPGRFA, with its multilateral system, were negotiated. The aim of this thesis is to investigate which consequences the regime complex concerning plant genetic resources for food and agriculture can have on the rights of small farmers, agricultural research and food security in the global South.

In two feeding experiments Bacillus induced priming of plant defense was tested for its effect against the generalist insect pest Spodoptera littoralis. The main hypothesis for the study was that Bacillus induced priming would enable the plant Arabidopsis thaliana to defend itself better against this insect herbivore since this priming seems to involve jasmonic acid, known to be important for plant defense to insects. A secondary objective of the study was to examine if any differences in a primed defense capability could be seen between different natural genetic variants (ecotypes) of A. thaliana reflecting habitat differences in pest pressure. The methods used for plant cultivation and Bacillus inoculation were aimed at reflecting conditions that can be expected in an agricultural cropping system. This meant that all plants were cultivated in soil, and the feeding experiments were conducted with the plants growing intact in the soil system.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.