Emotron is a company specialised in developing, producing and marketing equipment to con-trol, monitor and protect processes and machinery driven by electric motors, with an applica-tion focus. Examples of uses for their products are fans, pumps, lifts and cranes.The project is to look at Emotrons end of line test. The company has seen that at the final test-ing there is a bottleneck that restricts the outflow and prevents an increase in the number of tested products.The purpose of this project is to review how Emotrons end-of-line test works today and if there is a possibility to make the test more efficient in such a way that the quality is not at risk, while increasing the outflow of tested products.The projects first step is to look at and analyse what is causing the bottleneck at the end-of-line. When the analysis is complete, the next step is to review whether there is a possibility to solve the bottleneck and if so in what way can this be done. Emotrons most overall objective of the project is to increase the outflow of the number of tested products without jeopardizing the quality.An analysis has been made on frequency inverters, soft starters and shaft power monitors.

BACKGROUND: Today?s societal changes, including high rate of change and increasing information flows, are increasing the demand on the individual mental capacity. It becomes increasingly difficult to analytically process all the different dilemmas and everyday decisions as individuals have a limited mental capacity available to make these decisions. Thus, it has been suggested that ego-depleted relies more heavily on intuition, which is less burdensome, when making decision. However little is known about to what extent intuitive decisions differ from analytic.

Nutrient enrichment is the main cause of the increasing eutrophication process in the Baltic Sea during last century. A prerequisite counteract this process the load of nutrients to the Sea must be investigated. The large contribution of nutrients to the Sea is caused by emission from the rivers within the drainage basin. For the total emission of nutrient into the Sea the retention process in the rivers has big influence. This process in the river system has been assumed as a not important part of the nutrient cycle.

The goal for this master thesis project has been to investigate the power quality in adistribution grid, which has a high fraction of dispersed power production due towindmills. The study has been done on a grid in Laholm South of Halmstad, whereapproximately 45 windmills are connected to the distribution grid owned by SHKEnergi. The investigation has been focused on to two radialy fed 20 kV lines, wheretwelve windmills are connected.Voltage variations have been studied by creating a model of the grid in the simulationprogram SIMPOW. The largest deviation that has been found in any point of the gridis ±1.9 % of the nominal voltage. This deviation is a result of varying powergeneration from the windmills and the voltage regulation at the connection point ofthe line.

The goal of this thesis is to design an attachment between a duct and a pod. A pod is what could be compared to an outboard engine for larger vessels. The pod is placed on the outside of the ship?s hull and can rotate 360 ?. A duct is a large steel ring that can be placed around the propeller on the pod to increasethe propulsion force of the ship in lower velocities.

Hydropower is an important source of energy in Sweden and accounts for about 46 % of the total energy production. Sweden has about 1 200 hydropower plants and with the intention of raising the pressure head of the water and to store water, dams are built by the power plants. The storage reservoirs make it possible to adjust the energy production by demand and season. Dams in connection to the reservoirs are subjected to additional loading during periods of high floods or when an icecap in the winter is formed on the reservoirs. In order to maintain the dam safety, the power companies in Sweden are working with guidelines for dam safety from RIDAS.

The Goal with this Master of Science thesis is to expand the possible turbine efficiencymeasurements on an exhaust turbocharger. It was done as a part of the CICERO competencecentre. To feed the turbine with air a special flow rig has been used. Instead of loading theturbine by just restricting the compressor flow a docking system for an electrical dynamometer isdesigned to use the dynamometer as an additional loading source. By using an electricaldynamometer as loading device for the turbine, measurements are not depending on compressorperformance.A large part of the work consists in designing accessories for the dynamometer.

In Sweden, the eutrophication of lakes, water courses and the coastal areas is considered the major threat to aquatic ecosystems and therefore actions taken to reduce the nutrient load to aquatic system including the Baltic Sea has high priority. There are many different sources of phosphorous and nitrogen and domestic wastewater is one contributing factor to the high load. Especially waste water from households that is not connected to municipal sewage treatment or a local small scale plant with appropriate nutrient removal efficiency is considered a problem. These types of households are quite common in rural areas in Sweden and in areas where summer houses has been converted to permanent living. Swedish legislation now permit the municipalities to decide in which areas within the municipality higher demands of the local small scale treatment facility should be met by the households (i.e.

The project contains a force analysis of the vertical axis wind turbine Lucia's supporting arms and a measuring device to experimentally measure the forces is made. The forces between the supporting arms and the tower are calculated theoretically and then simulated by a computere. A measuring devise is then designed to measure the forces experimentally. The forces acting on the attachment between the supporting arms and the tower is primarily the centripetal force, gravitational force and the aerodynamic forces on the rotor wings. The maximum forces were theoretically calculated and is 13.38 kN along the x-axis, -0.25 kN along the y-axis and then 0.5 kN along the z-axis.

Regulations on the exhaust emissions of HD-diesel engines are becoming more and more stringent, and therefore, emission after-treatment systems are commonly used. These systems rely on catalytic conversion of NOx,CO , and HC emissions, and are thus dependant on temperature. At low load of the engine, exhaust temperatures are not sufficient for the after-treatment components. Therefore, means to increase the exhaust temperature while maintaining low emissions and fuel consumption are needed.The focus of this project has been to develop strategies for the lift profiles of exhaust and intake valves in the engine, with the goal to raise exhaust temperature in combination with low emissions and fuel consumption. The strategies have been tested in a single-cylinder research engine equipped with a hydraulic variable valve actuation system.

Detta examensarbete utgör resultatet av en studie på uppdrag av Volvo Cars Torslanda (VCT) i Göteborg. Syftet med studien har varit att undersöka produktflödena mellan VCT och dess leverantörer med hjälp av analyser. Dessutom utreds hur transporterna skulle kunna optimeras och vilka konsekvenser som uppstår. Beräkningar, diskussioner och analyser resulterar i rekommendationer för företaget.För att få mer kunskap om transportlogistik, produktionsekonomi och miljöpåverkan av transporter genomförs först en litteraturstudie. En granskning av nuläget beskriver hur situationen ser ut i dagsläget och ger även en detaljerad bild av flödena från leverantörer till VCT.Sex stycken flöden vars gods transporteras från leverantörer till VCT har undersökts.

To build high-rise buildings made of timber has for long been limited by national laws, due to the lack of knowledge in engineering solutions. Frame structures made of wood has for a long time been associated with major fire hazards and consequently lower safety and this connection is still being made today. The increased environmental awareness in recent years has contributed to the exploitation of indigenous building materials, including wood from our own Swedish forests and has become increasingly common. Increased knowledge about how structures behave in fire and how they can be protected in order to achieve safe timber structures has resulted in a growing interest in these structures in the construction industry. Research in the area is constantly updated and new laws allow any number of storeys in wooden buildings in Sweden as long as the performance requirements are fulfilled.The main part of this work has involved calculations of the fire resistance and load bearing capacity of floor and wall constructions.

AbstractThe tests work is about the subject "synergism of steel and concrete."The construction sector is in a strong competition and the different companies in the PrefabMarket has ever tried to develop new design solutions that are efficient and environmentallyfriendly.The purpose of this report is to highlight different aspects of interaction and size up a columndimension and to examine its efficiency and load capacity as Eurocode 3 and Eurocode 4. A sizing chart that describes the relationship between the torque and normal force shouldalso be made of the interaction . .

Syftet med denna uppsats har varit att öka vår förståelse kring vad barn och ungdomarbehöver för att klara skolan och lämna såväl grundskolan som gymnasiet med godkändabetyg. Detta främst utifrån vad ungdomar själva anser vara viktiga påverkansfaktorer. Någotvi menar är högst relevant för det sociala arbetet, inte minst det skolsociala, då utbildningbidrar till att förebygga social utslagning. För att uppnå vårt syfte utformade vi fyraforskningsfrågor; (1) Vilka personliga färdigheter eller förmågor är enligt elevernabetydelsefulla för att få godkända betyg? (2) Vilka faktorer i familj/närmiljön tänker elevernaär centrala för att få godkända betyg? (3) Vilka faktorer/insatser från skolans sida ansereleverna är centrala för att få godkända betyg? (4) Vilka faktorer anser eleverna har haft störstbetydelse för dem under den egna skolgången? I vår uppsats har vi valt att använda oss av enkvalitativ metod.

The EU Water Framework Directive has led that management follows the boundaries of natural catchments.The Swedish waters suffer from a nutrient overload that originates mainly from diffuse sources such as agriculture and the subcatchment of Hackstabäcken in Vallentuna Kommun, just north of Stockholm, has been chosen for this study because of its high nutrient load and because it has undergone obvious changes in land use through the years.In this study, the land use in 1902 is compared with the land use in 2011 in order to investigate if it has influenced the ability of the landscape to produce ecosystem services related to nutrient removal. These services will continue to be produced as long as the system is stable and resilient, but when landuse changes and manure from horses increases it will lead to disturbances that can convert a system from one regime in to a completely different one. That will result in loss, or degradation, of ecosystem services such as denitrification, phosphor sedimentation and adsorption, vegetation uptake and infiltration.The results of this study are based upon area calculations of landuse from old maps from 1902 and 2011. Through these maps it becomes clear that the forests in Hackstabäcken, has increased with 170 ha together with an urbanization of 311 ha, at the same time as wetlands and arable land has diminished and lakes has suffered from reductions. Wetlands have been reduced with 76 ha and the ones remaining are of insufficient quality from a nutrient removal perspective.Data from 1902 and 2011 regarding number of horses and bovines indicated a decrease in bovines and an increase in horses.