Sök:

Sökresultat:

591 Uppsatser om Peak load boilers - Sida 29 av 40

Nätverkets och användarens påverkan på latens i en Virtual Desktop-miljö

I en värld där kraven på flexibilitet, säkerhet och hårdvaruoptimering är nyckelfaktorer när det kommer till att välja IT-miljöer för företag blir virtuella skrivbord mer och mer poulära. Med dessa miljöer finns det också problem när det kommer till användarupplevelsen om nätverket ifråga inte kan uppfylla de krav som ett sådant system ställer. I detta arbete undersöks implikationerna vissa nätverksvariabler kan ha för en Virtual Desktop-infrastruktur, VDI. För att belysa dessa problem har två tester utförts på en VDI miljö. Det första testet gick ut på att mäta latensen då skrivbordsmiljön renderades för klienten från virtualiseringsservern vid olika nätverksdiamterar.

Marknadsundersökning: Lämpliga flygplan med avseende på start- och landningssträckor för Bunge flygfält

In many products a compromise between ground clearance and the required space to store the product has to be made. This problem attracted the attention of the authors of this thesis.The objective of this project is to develop a functioning solution to a foldable wheel. The solution should be applicable to several types of product groups. A limitation for this work has been made so that the work only covers solutions for lighter vehicles.The purpose is to drive this project forward, so that a solution can be found. Furthermore the purpose of the report is to clarify how the authors proceeded to design and construct the wheel according to a fixed specification.

FaR för en heterogen målgrupp med komplexa behov : Förskrivares upplevelse av fysisk aktivitet på recept (FaR) och samverkan med aktivitetsmottagare

  Aim. The aim of the study was to describe how nurses in home care experience to pursue palliative care in ordinary housing. Methods. The study had a descriptive design with qualitative approach and was carried out through semi-structured interviews with 14 nurses in home health care from two medium-sized Swedish municipalities. The material was analyzed with manifest and latent content analysis. Findings. The underlying theme that emerged in the study was: Working with palliative care in the patient´s own homes is positive but challenging. Informants describe among other things that they perceived palliative home care as meaningful and that relatives have a central role in the palliative home care since they are close to the patient around the clock. The stress that emerges from the heavy work load and the long geographic distances are described as strenuous and to affect the care in a negative way. Informants describe the home environment as challenging as it is often not adapted for care and the collaboration with the palliative team is described to be experienced as both positive and negative.

Fallstudie av produktionschefers ledarskap

The thesis presented in this report has been made on behalf of Scania and their basic frame design department with the subject to solve an implementation of a weight sensing system in the chassis. The system is supposed to be implemented in the seat springs, and the reason for this is that all the force will have to go through the weight sensing transducers. With all the force going through the transducers the weight sensing system will not be sensitive for the differences in tolerances from manufacturing. The transducers could be pre-calibrated to avoid a calibration of the whole vehicle after it?s completed from the manufacturing line.Weight sensing systems is today a reality in trucks with air springs.

Nedbrytning av vägar: Jämförelse mellan axlar med singel- respektive tvillingmontage

When designing roads it?s important to knowwhat loads will bedriven on it. The axles on heavy vehicles can either have super single tires ordual tires which, according to studies, damage the roads differently. The SwedishTransport Administration is developing an understanding for the character ofthese different kinds of axle and tire types on the loads induced on Swedishroads. In this thesis a field study was conducted to determine the distributionbetween axles with super single tires and axles with dual tires on heavy vehicles.A highway, a country road and a national road were investigated during thestudy.

Byggnation av takstolar Lwengo Basilla : Tillverkning och beräkning av erforderliga dimensioner på takstolar för att uppnå en jämn och säker byggprocess i Demokratiska Republiken Kongo

Denna rapport är en del av ett examensarbete på avdelningen för "Byggteknik och design" med inriktning "husbyggnad, projektering och konstruktion" på Kungliga Tekniska högskolan i Stockholm, Sverige.Rapporten handlar om byggandet av ett tak för en skolbyggnad i byn Lwengo Basilla som ligger i sydöstra delarna av Demokratiska republiken Kongo. Skolprojektet finansieras av en ideell organisation i Sverige som heter "Elikia na Biso" och leds av Miza Landström. Designen och konstruktionen av skolan har tagits fram med hjälp av studenter från olika avdelningar inom Kungliga Tekniska högskolan (KTH). En grupp studenter från KTH hjälpte till att lägga grunden och väggarna i skolan. Nästa grupp av studenter skickades för att hjälpa till med byggandet av skolans tak.Denna rapport fokuserar på att dimensionera och konstruera taket på skolan med hjälp av lokala material på ett effektivt sätt.

Ersättningsmodeller för ballasttransporter : vid anläggning och underhåll av skogsbilvägar

Construction and maintenance of forest truck roads are a necessary element of industrial forestry. Payment for contracting services in this context can be done according to a number of payment models. This study will focus on the methods and consequences associated with a change of Holmen Skog?s payment model from per hour to per metric ton for ballast hauling. The aim of this study is to improve the economic efficiency of Holmen Skog?s ballast hauling in construction and maintenance of forest truck roads. This is done by formulating and evaluating a proposal for a payment model based on crowns per ton.

Blood compatibility of biomaterials made of recombinant spider silk

Native spider silk is an attractive lightweight natural polymeric material with a unique combination of strength, extendibility and flexibility. Synthetic, recombinant spider silk is an attractive biomaterial with several possible fields of application. When a foreign material is introduced to blood, this can for example cause unwanted coagulation and complement activation. The aim of this study was to investigate if coatings of heparin or albumin could improve the blood compatibility of films of recombinant spider silk and to develop an initial method to do so. Hypothetically, objects like pacemakers, stents and dental implants could be covered with spider silk films of high blood compatibility to reduce potentially harmful foreign body reactions caused by the immune defense. Increased blood compatibility would likely lead to improvements for both the individual patients and the society thanks to reduced load on healthcare institutions. Our objective was to assess the blood compatibility of both functionalized and non-functionalized recombinant spider silk by evaluating coagulation and activation of the complement system of the immune defense. Coagulation was evaluated visually on glass slides and complement activation was analyzed by measuring the concentration of the complement system mediator C3a in blood samples that had been exposed to the different materials. This study introduces a non-toxic and easy performed method of improving the blood compatibility of recombinant spider silk films by adding a heparin coating. Heparin coated surfaces had statistically significantly higher blood compatibility than uncoated surfaces. The effects of albumin coating of films were less clear compared to the results of heparin coated films. Complement activation could not be evaluated because of high activation in all samples prior contact with the materials that were included in the study..

Ett kandidatexamensarbete inom lättviktskonstruktioner .

Due to recent legal enactments regarding carbon dioxide emissions, the car industry is facing higher demands. An effective way of reducing these emissions is to minimize the weight of the vehicle. This thesis constitutes a feasibility study on whether or not it is applicable for the car industry to utilize an inner floor structure comprising composite materials. The principal was the projectSåNätt, in which the main participant was Volvo Cars Corp. In consultation with a reference group, consisting of delegates from the industry and KTH, a specification of requirements was produced.

Innovativ utmatningsteknik : Mediumstor bulkförvaringslösning

This master thesis was done for a company called BRUKS which is active in woodprocessing,bio-energy and bulk material handling industry. The idea for the master thesis wasto develop a new reclaiming method for silos where wood chips are being stored. A mediumsegment of between 1000 ? 5000 m3was defined as the segment with the most sales potential.Two different concepts were produced, one for new constructions and one for rebuildingalready existing silos.In the beginning of the master thesis a lot of time was spent on visiting different BRUKSoffices and customers to get an overview of the industry and the product. This informationwas the basis when the idea generating phase began.

Fem-studie av rörelser i planet mellan bakaxelbrygga ADA1100 och centralväxelhuslock R780

This thesis has been performed at Scania CV AB Technical Centre in Södertälje and its aim hasbeen to study the causes and effects of deformations in the interface between the rear axlehousing ADA1100 and the central gear house R780 during operation. Design changes that wouldincrease the sealing capability of the studied interface are also suggested. Finite element (FE)and CAD software have been the primary tools in this study.Finite element (FE) simulations are used in the industry to predict and develop engineeringdesigns. The main motive for FE simulations has traditionally been to identify weak spots in thedesign, regarding high tensions and large deformations.The FE model is an aggregation of submodels and interface models that represents the rear axlehousing, suspension, central gear, central gear housing, wheels, bolts and weldings, and theirinteractions. The submodels have different material properties and they are connected withcontact interface models.Boundary conditions are defined on the bushings in front of the rear axle and on the air bellowsbehind the rear axle.

Use of oxytocin to improve diagnosis of subclinical mastitis caused by Staphylococcus aureus

Mastitis, inflammation in the udder tissue, caused by S. aureus is a big problem in dairy cattle production. It causes suffering for the cow and curing or replacing the infected cow is costly for the farmer. It is known that beef cattle also suffer from mastitis caused by S. aureus.

Inställning av automatikermed spänningsreglerande verkani det sydsvenska 400-130 kV nätet

The voltage level in the power grid varies due to variations in load and production. Normally these variations are manageable, but they may be excessively large during a disturbance. If the voltage is too high it may damage the equipment in the grid and too low voltages may cause problems like voltage instability. The magnitude of the voltage variation depends on the short circuit power capacity of the point of interest.This problem may become lore prominent due to automatic voltage regulation that acts on shunt reactors and shunt capacitors. When the shunt reactor is connected or disconnected to the grid it may cause such large changes in the voltage that the shunt reactor starts hunting.

Logistikfastigheter i Stockholms län - En analys av värdeinverkande faktorer

In this report a study is carried out with the aim to identify added values of EPC projects implemented in schools in order to increase the interest of EPC projects on the market. The report examines how the planned maintenance, supervision, maintenance and corrective maintenance is affected, how insurance premiums and terms are affected, the indoor environment and how the tasks of the operating staff is changing. A literature study of energy savings, energy use in schools, maintenance and insurance as well as how energy efficiency improvements are related to the Swedish environmental objectives has been made. Visits were carried out in Ludvika, interviews were also carried out with operation technicians and local strategists in Ludvika as well as employees of insurance companies.Schools often have neglected maintenance and problems with ventilation and indoor environment. Schools also have a large energy saving potential due to their low utilization, mainly because they are empty parts of the year.

Chassiintegrerade lastceller : Installation i fjädersäte på Scania tandemboggibakaxlar

The thesis presented in this report has been made on behalf of Scania and their basic frame design department with the subject to solve an implementation of a weight sensing system in the chassis. The system is supposed to be implemented in the seat springs, and the reason for this is that all the force will have to go through the weight sensing transducers. With all the force going through the transducers the weight sensing system will not be sensitive for the differences in tolerances from manufacturing. The transducers could be pre-calibrated to avoid a calibration of the whole vehicle after it?s completed from the manufacturing line.Weight sensing systems is today a reality in trucks with air springs.

<- Föregående sida 29 Nästa sida ->