The purpose of this study was to investigate what view of humans that emerges when priests/reverends talk about man in relation to baptism. The study consists of qualitative interviews with four priests/reverends. There were two representatives from the church of Sweden, and two from the Pentecostal church. The aim and questions in the study focus on what view of humans that emerges. Will there be similarities and differences in the view of humans, and is it possible to refer the result to the respective church.

This study aims to analyze the risks with building new households between railroads and shore, the focus of the study lays on Öbacka strand in Umeå municipality. The study also investigate if a land use conflict has taken place and how it was handled.The paper is based on different documents that was central for the work of planning the households and some interviews with operators that was highly involved with the planning of the area.The results shows that there is several risks with establishing new household between railroads and shores. Mainly because of the exposure of noise from the railways, though the risk for impact on the living environment for animals were low in this case there is a generally risk that it could get negative effects. It also a very important that the availability to the shore is secured. Planning in this type of area involves a great number of operators can easily cause a conflict due to the different perspectives on how the land should be used in the future, and also because of protecting different interests.

En 200 år gammal skånelänga uppnår 2000-talets energikravDetta arbete redovisar hur konstruktionsförbättringar på en gammalskånelänga kan förbättra husets boendestandard samt att huset tack vareförbättringarna uppfyller dagens krav ur energisynpunkt. Detta utförs utan attinskränka på dess arkitektoniska ursprung. Vi har tagit fram lösningar förhuset som förbättrar grunden väggarna och vinden, kortfattat tilläggsisolerasdessa och förbättras. För att få svar på hur våra förändringar har påverkathuset så har vi gjort beräkningar i ett energiprogram som bevisar att huset harförbättrats energimässigt och uppfyller dagens krav enligt BBR. Beräkningarhar även utförts i ett program som behandlar köldbryggor, detta för att visavad man kan tjäna på om man utför en åtgärd för at förhindra en köldbrygga..

This paper describes the design and implementation of an automated build system for the JAS39A simulator FUS39A at HiQ:s offices in Arboga. The assignment was to automate the process in which modules are built; the simulator is composed of a number of modules which are built manually at the end of each week, this process takes about a day of manual labor. The system can automatically build a module as either a scheduled service or by manual invocation. The system contains functionality for reporting the build results to any given recipient by e-mail. The purpose of the system is to free up the time put into manually building the modules for better suited tasks by automating the build of FUS39A.The assignment was split into two parts, an analysis part where information of the old system was gathered, tools and methods were chosen and the new system was designed.

This Master?s Thesis aims to illustrate in what ways the two Swedish environmental assessment tools, the Environmental Load Profile and EcoEffect differ and if performed valuations gives different results and environmental goals.The built urban environment causes about half the environmental loading in Sweden. The society?s ambition towards sustainable development has resulted in demands reducing the environmental load. One way to accomplish this change is with the assistance of tools for environmental assessment of the built environment.

This thesis examines the verification of the terms and conditions stated in contracts based on the Public Procurement Act. In March 2013 the Swedish state procurement commission released " Good Business - A Strategy for Sustainable Public Procurement " (SOU 2013:12), which found that the proportion of control and verification is relatively low. The thesis examine how verification is carried out and looks for an explanation to why verification is not more oftenly performed. To answer these questions two care studies, based on seven semi-structured interviews, is presented as the empirical material. Network theory has been used to analyse the empirical results, and aspects of commonly used theories such as contract management and "Markets and Hierarchies" by Williamson has also been taken into account.

The United States use of Unmanned Combat Aerial Vehicles (UCAV) or drones for targeted killings of terrorists has been on the rise in recent years and the method has become the core element of president Obamas strategy in the war against terror. This study examines the deterrent effect of targeted killings on terrorism using UCAV/drones as a method of counterterrorism. Building on the literature on counterterrorism, UCAV, targeted killings, deterrence theory and statistics on terrorism the study provides a case study of the CIA drone operations in Pakistan between the years 2004-2010. The goal has been to analyze drone operations and the extent of terrorism from the beginning of the drone campaign until 2010. This as a means of identifying possible trends in terrorism activity due to the occurrence of drone strikes.

Syftet med undersökningen var att undersöka hur barn bygger utifrån en inspirationsbild samt om barnen lär sig mer då de utmanas av en pedagog. Undersökningen genomfördes med hjälp av observationer av barn på en förskoleavdelning där samtliga barn var tre år gamla.  Resultatet visade att de flesta barnen byggde vertikalt. Endast ett barn valde att bygga horisontellt och använde inspirationsbilden som underlag till sitt bygge. Resultatet visade även att det har stor betydelse om det finns en pedagog närvarande som utmanar barnen vid bygg och konstruktionslek och kan synliggöra deras lärande. Skillnaden i barnens byggande när de blev utmanande av en pedagog var att de använde sig av flera byggklossar när de byggde samt av flera olika geometriska former på byggklossarna..

The purpose of this report is to analyze the advantages of using programme software to monitor masshauling instead of using the conventional method. A comparsion between different programs will also be conducted in an attempt to determine the most affordable. This report is written for NCC Construction AB to help them choose a software most fitting for future projects.The report is based upon literature such as information taken from the developers website, existing reports with similar context, interviews with sellers of the software and interviews with people working in the building sector.The result of this report shows that there are several advantages with investing in a software that helps the management of a project and that it is something that should be taken under consideration instead of the existing method. Topcon is a clear favorite following the inquiries comparisons as done, when they deliver a complete system and not only a supplement to the current approach. Scanlaser are just in the beginning of its development, and is so far only out with an early version of the software, while Topcon has been brought further in development and therefore has more features in the program.

This Bachelor of Science thesis was carried out at Metso Panelboard AB, located in Sundsvall, Sweden. The work lasted for 10 weeks and began at the end of February 2007. Metso Panelboard is one of the leading suppliers of complete lines, single machines, engineering knowledge and after-market services to the fibreboard industries. The task involved building a 3D-model of a dryer cyclone in the CAD-program Pro/ENGINEER. A dryer cyclone is the part where the tree fibres are dried in the process of manufacturing fibreboards. Currently, it takes about two weeks to draw a dryer cyclone. By creating a 3D-model of it, which should have the functionality to be generated to different sizes, the goal is to decrease the drawing time to about 20 hours and to increase the quality of the work. This report includes the fundamental theories behind the manufacturing of fibreboards with focus on the dryer cyclone.

My questions at issue for this report has it´s beginning in the growing problems of thenegative effects of burning fossile fuels and the rapidly growing energyprices.1. Is it possible to design a micro scale powerplant?2. Is it economically interesting for a potential customer to by such a product?The aim with this report is therefor, with the help of design work and calculations, to answerthese questions and to create a platform for building a fully functional micro scale powerplant.The material used in the report is mostly product catalogs from various industries but alsostudy course littrature about steam engines.The result of the report is that it is fully possible to design a fully functional micro scalepower plant.

Bildskapande är något som nämns inom bildkonsten och innefattar konstarterna skulptur, måleri, teckning och grafik. Ett argument för vikten av bildskapande aktiviteter är utvecklandet av visuell ?läs- och skrivkunnighet?. I det här arbetet kommer vi att lyfta bildskapandet ur ett förskoleperspektiv. Syftet med vår studie är att ta reda på hur två pedagoger använder bildskapande som pedagogiskt verktyg och hur de kopplar detta till läroplanen för förskolan.

The purpose of this degree project was to build laboratory equipment for a new course in power electronics that starts this autumn 2010 at Uppsala University. The equipment is intended for student labs and it covers the most important areas of the course including rectifying, buck-/boost-converters and PWM-modulation. It is built as one sealed unit where all the electronics are built-in but visible and it has a connection board where students safely can connect the different circuits. The project has advanced from theoretical studies of circuit design, choosing of components and simulations to drawing the printed circuit board (PCB), soldering, case building, final testing and troubleshooting - basically most steps from an early idea to a final product. Measurements on the final product gave about the same results as the earlier simulations of the circuits and the result is overall satisfying..

The Scanian woodfences has been determined by two mainly elements: Scania's composition of tree species, with a large element of deciduous forest, and the local building tradition which has more in common with the European continent than the Swedish tradition. By examining responses from ethnological question lists deriving from the first half of the 1900s, combined with literature studies, I have been able to deepen and broaden the knowledge behind the various fencing design. In addition I ?ve constructed maps which could illustrate their historical geographic distribution.I have come to the conclusion that there was three main types of woodfences that was most common until the barbed wire was introduced in the early 1900s and later on replaced the elderly woodfences. Common for the three main types is that the base material was made out of Juniperus communis, this largely because of its durability against rot.

This thesis conducted at the University of Uppsala investigateshow well a prefabricated building component from the manufacturerMasonite Lättelement AB can be incorporated into ahouse projected to accomplish the demanding criteria of a passivehouse. The thesis is organized as a comparison betweenthe prefabricated elements and an on-site built component fromthe passive house area of Oxtorget in Värnamo, Sweden. Theaspects investigated were air leakage, energy, moisture, economyand noise conditions.Results of the comparative analyzes shows that the prefabricatedproducts were capable of accomplishing the requirementsof passive houses and therefore this thesis should beviewed as a basis to confirm that the technology of prefabricatedbuilding components today in Sweden are mature enoughto be a significant part of the passive houses that are to be builtin the near future. The development of prefabricated technologyis of crucial significance if we are to accomplish the goalsof reduced energy consumption by the year 2020..