Volvo Construction Equipment is one of the worlds largest manufacturer of heavymachinery. In Braås, Sweden, they develop and manufacture articulated haulers inseveral sizes. The biggest, the A40, is capable of loading almost 40 metric tonnes.These haulers have a bogie to distribute the forces of the load evenly onto the two axlesand there wheels. The bogie is constructed using a rigid balance beam on each side ofthe frame connecting the axles or an independent solution using hydropneumatics.An analysis has been made in order to establish the forces created during corneringand through the theory, an estimation of the extensive tyre wear and extra fuelconsumption has been made. All due to the effects of the tyres not being inline with thecornering radius.

The purpose of this study is to describe the traceability of products that protect against counterfeiting and examine how protection against counterfeit products have been developed to date, and to display the opportunity to streamline the protection of products and brands.Nowadays, in the global world, it is getting increasingly more difficult to track the products. Especially for the last link in the chain, which in most cases is the customer and who is constantly exposed to risks. This report deals with the possibilities of preventing and detecting counterfeit products. Fake products are not unusual in an historical perspective. It has been common with counterfeits ever since the Middle Ages continuously until today. Forgers have become more skillful and they are successful in most industries. Many of the fake products are of poor quality and can be downright dangerous to the customer.To answer the question, the author used a qualitative collection method.

Examensarbetet har bedrivits vid Tekniska Högskolan i Jönköping och i samarbete med fallföretaget Solutions for Tomorrow AB. Arbetet har utformats efter ett syfte; att utveckla ett produktkoncept där alternativa material och tillverkningsmetoder leder till kostnadsbesparingar. Syftet har sedan brutits ned till fyra frågeställningar som arbetet kretsar kring. Två frågeställningar behandlar redan framtagna koncept och två rör ekonomiska aspekter för nya projekt. För att besvara frågeställningarna är arbetet utformat som en konceptstudie där hela utvecklingsprocessen har genomförts.

This study is based on the will to understand the importance of a specific theory within social work. From the concept of neo-liberal governmentality, the aim is to critically examine and discuss how governance and self-governance is manifested in social work methods and interventions, exemplified by the theory cognitive-behavioural therapy (CBT). This will be accomplished through an analysis of:? How governance (and self-governance) is manifested in text through the advocacy of CBT and methods based on CBT.? How (governance and) self-governance is manifested in text through the contents of CBT and methods based on CBT. The study has a deductive approach including the hypothesis that the discourses inherent in social work methods and interventions, exemplified by the theory of CBT and methods based on CBT, may be related to the West?s development of a neo-liberal concept of governance.

Today there are a big need for a system that delivers overview of all available units for different municipalities and shipping- and security companies due to the increasing requirements for efficiency. The purpose with this graduation thesis is to find out which systems that is suitable to use while developing cost-effective software for positioning and to produce a prototype for such solution.This assignment has been done at the request of PocketMobile Communications AB. PocketMobile is a company that are specialized on delivering modern mobile software solutions and systems to companies with their own vehicle fleet or mobile workers.This master thesis can be split into two separate parts, the theoretic- and the practical part.The theoretic part includes producing a number of functional requirements in cooperation with PocketMobile and comparing the available systems against the function requirements.The practical part deal with the development of a prototype that demonstrates the software recommended. The development tools that best matched the functionality requirements when the selection was made in May 2007 were Map24 and OpenLayers. The system that was selected to use while developing the prototype was Map24, because this product matches all of the requirements and it is also suited for professional usage regarding support, scalability and reliability.

This thesis is the result of the investigation and solution of a mechanicalproblem regarding flywheel malfunctions. A flywheel is, in short, a devicethat relies on a rotating object?s moment of inertia to store energy overshort time spans. This project is part of the development of a fourthflywheel prototype at the division for electricity at Uppsala university,which uses magnetic levitation to keep a hollow cylinder rotating at veryhigh speeds inside a vacuum chamber. Should the magnets fail however, orsome other error occur that leads to an uncontrolled state of rotation, thecylinder needs to be stabilized mechanically by a device usually referredto as ?back-up bearing?.

Purpose: The purpose of this thesis is to identify and analyze innovative products and services within the telecom industry, letting these findings constitute possible ways for CSPs to innovate the experience of their customers. Methodology: The research in this thesis was conducted from a qualitative approach and data were collected using primary- (expert interviews) and secondary sources (journals, articles, web sites etcetera). In addition, a research design entailing four sequential steps was created to stipulate and illustrate the logic underpinning the methodological process. Theoretical perspectives: The theories are divided in three groups. Background theories ? these intend to capture the problematic nature of the transforming telecom industry, examples of such theories are; value chain theories and ecosystem theory.

This thesis is ordered by Peab Sweden AB Regional Jönköping and concerns of warranty inspections.The intention is to work out a basis, which show the most common complaints is the warranty inspections, and make a small analysis on what causes them to be. The report also presents possible solutions to prevent the occurrence of defects. It also covers the issue of how the client looks at Peabs way to overcome the objections of warranty inspections. The report has the following issues:?What are the most common errors observed during the warranty inspection??What are the causes of complaints??What can be done to reduce the number of complaints??How the customer thinks that the complaints be addressed?Twenty-five Guarantee survey records from the projects Peab has done in recent years has been the starting point for the investigation.

It has become more common for organization to operate a lot of projects at the same time. These projects affect each other, either in way of resources or technical. Projects in a multi-project environment depend and affect each other, and in most cases they rival about resources, decision-makings and priority. To lead a project portfolio with several projects is a major challenge. The most common problems that occur are vague objective, unclear working conditions, resource shortage and problems of priority.

Svenska Aerogel AB has developed the material Quartzene® which is of the typeprecipitated silica and contains calcium - magnesium silicate ((Ca, Mg) SiO3). Thematerial is used for molecular filtration of contaminated air. Qartzene?, which is inpellet form, is porous and has a high internal surface which is a requirement for themolecular filtration. With the use of various impregnations, filtration can affect thedesired outcome.

The project, Flexible Snowboard System, has been carried out by the project group independently and is a module developed for snowboarders, ski rentals and ski schools. The problems of today?s solutions are that they cause the user an inconvenient standing position when riding the ski lift or skating the transportation slope, also mounting, adjustments and disassembling of the bindings are time consuming and brings undesired wear to the screws and screw holes. In addition any adjustments require that the user steps out of the bindings and have tools at hand. Flexible Snowboard System is a universal module which means that it can be assembled with all of today?s snowboards and bindings.

The purpose of this study is to highlight the second home sector in Sweden and Denmark, in a comparative study of regulations for the second home market, and residence requirement. Two attractive second home island destinations is being compared in Ven, Landskrona and Gudhjem, Bornholm. The study addresses issues such as the local effects of a regulation of the second home market get at a local level, and the effects generated by deregulation, as well as local people's opinions about second home regulation in a popular second home area in southern Sweden. This has been examined using a mix between qualitative method and quantitative methods, and the study is based on six semi-structured interviews from informants from Ven, Bornholm, and Gudhjem which has been analyzed throughout a thematic analysis. In addition to the interviews, diagrams from the Central Bureau of Statistics of Sweden and Statistics Denmark, and various real estate websites, and a field observation from Ven and Gudhjem will be presented.The result shows that show that the discussion on residence requirement has been going on for a long time in Sweden and Ven, but the local organizations found more disadvantages than advantages and are now looking in to other solutions, while other locals believes that there are more advantages with a residence requirement. In Denmark it?s revealed that there is recently started discussion between municipal decision-makers and local organizations about the regulations, and if it should be abolished or not.

This paper presents the result of a master thesis project at 30 Hp, master of industrial engineering at Luleå University of Technology. The project was performed during 20 weeks, spring 2014, in collaboration with ABB Control Products in Västerås. The aim of the project was to evaluate two half-automated assembly lines for a new generation of contactors, the NAFC assembly lines (New AF Conductor). The aim and purpose of the project was achieved by answering the following questions:? How are the ergonomic working conditions at the NAFC assembly lines during spring 2014?? Which areas at NAFC assembly lines can be improved for the work environment?? How can the ergonomic work conditions improve at the NAFC assembly lines?Literature reviews were performed from earlier research papers and articles of the ergonomic, musculoskeletal and work environment subject, from where a number of chosen methods and tools were used to perform the ergonomic evaluation.

AbstractThe future of ethanol is depending on good solutions for the production. ENA energy power plant produces electrical power and district heating by heating biofuel. By building an integrated bioenergy plant surplus steam could be used to produce ethanol as fuel to vehicle.This would mean that ethanol is produced renewable energy and the energy for the process derives from the surplus of power.  ENA energy, MDH (the University of Mälardalen) and the energy authority has initiated a research project were different bioenergy combinations integrate with existing power plant.  As a part of the project which size an integrated factory should be to gain the best efficiency for the plant was investigated. Consideration will be taken to the cost of the production in order to be competitive to the price of imported ethanol.  Etanolens framtid vilar på bra lösningar för framställning.  I ENA energi kraftverk i Enköping produceras el och fjärrvärme genom eldning av biobränsle.  Genom att bygga ett integrerat bioenergikraftverk där skulle man kunna använda överskottsånga till att framställa etanol som fordonsbränsle.

Bakgrunden till studien var ett gemensamt intresse kring ungdomars identitetsutveckling. Då inga studier kring hur just hemmaplanslösningar kan bidra till en positiv identitet gått att finna, så blev det intressant att genomföra en studie kring detta. Studiens syfte är att utifrån ett personalperspektiv öka förståelsen för vilken innebörd arbetet med hemmaplanslösningar har då det gäller att ta tillvara och stärka ungdomars positiva identitetsprocesser. För att kunna besvara detta syfte har frågeställningar utvecklats som först handlar om hur en personalgrupp beskriver att identitetsskapande sker i deras verksamhet och hur de sedan beskriver att hemmaplanslösningar kan bidra till att stärka dessa ungdomar i en positiv riktning. Studien har utgått ifrån ett socialkonstruktionistiskt perspektiv som har varit genomgående i hela uppsatsen.