One of the biggest changes which have affected businesses during the last ten years is the accelerating speed at which Internet technology and e-commerce has developed. If Internet earlier was used in the purpose to entertain it is now accepted as an essential business tool and companies are investing more of its resources in e-commerce activities. Everyone ?has to be on the net? today but that implies a challenge in matching e-solutions to the company?s business goals. It is necessary to have clear goals, carry out research and plan a strategy in order to operate an optimal e-commerce website for the company?s needs.The purpose with this dissertation was to see how well companies adjust to new demands in the rapidly changing e-environment.

The purpose of this master thesis is to create, test and evaluate an analytical instrument for children?s library environment based on a theoretical framework consisting of Howard Gardner?s theory of multiple intelligences and Thomas Armstrong?s pedagogical application of the original seven intelligences. We wanted to investigate whether the environment in Rum för barn stimulated all of children?s different intelligences. We also wanted to identify possibilities and liabilities within the analytical instrument.

This project was a collaboration with Kajsa Bergström. The projected was to develop the French/English deck of cards. We replaced the knight, queen and king with the numbers 11, 12 and 13. We worked with separate aesthetics and solutions after making that common change. I worked on an idea on how to make the cards look slim, by adapting a handcrafted look, full of details.

Researchers, planners, and government agencies agree that road safety for children must be a priority and in particular that children should have a safe and secure way to travel to and from school regardless of age or the distance travelled. In Sweden, child traffic safety is a key part of the country?s Nollvision, a long-term traffic policy goal of ?no deaths or serious injuries?. Unfortunately, many countries have recorded increases in child traffic accidents as the percentage of parents who drive their children to school and thus congestion around schools has increased. Common strategies include traffic safety education for children, the redesign and improvement of traffic infrastructure, bicycle training, and carpooling.This thesis assesses the traffic problem around Ludvigsberg School in the district Valbo in Gävle, Sweden.

The aim of this thesis is to study a number of standards and theories, from the two research areas human-computer interaction and psychology, about how a graphical user interface (GUI) should be composed in order to facilitate interaction between humans and computers. Special emphasis is put on how the GUI should take into consideration the strengths and limitations of human cognition and perception. A study of three web catalogues shows how these theories appear when concretised. The following questions are answered in this thesis:What guidelines and styleguides can be found that specify the design of a user-friendly GUI?How do a few library catalogues on the web match a selection of these design principles?The guidelines are extracted from literature concerning human-computer interaction, psychology, automated library systems and web design.

This report shows the process of the development of a sensor module for the seed drills of Väderstad Verken AB. The module is supposed to replace existing solutions, provided that it is better from both a constructional- and an economical aspect. The purpose of the sensor is to continuously give the driver information about the level of height of the front- and drilling tools and the main purpose of the sensor is to allow the seeds to be placed at the desired depth. The sensors which have been taken into consideration have all been of an analogue type and have a protection class of minimum IP67.The methods applied have been taken from the book ?The Mechanical Design Process? by David G.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

Microproduction, also called distributed generation, is something that has become more and more popular in the electric grid. Microproduction can however lead to unacceptable performance if several units are installed in the same low voltage network. It is therefore good to know a limit where the performance of the low voltage network becomes unacceptable based on given parameters. This limit is usually called hosting capacity.In this report the hosting capacity with respect to voltage and current have been studied in three low voltage networks which are located in Falu Elnäts concession area. This has been done by simulations in a GIS-program where critical times of the grid have been simulated.

ABSTRACTDuring the last decades, environmental impacts have increased significantly, much due to the great traffic flows within cities. Therefore, to reduce these impacts and encourage a healthy way of living, it has in recent years become vital to generate safer and more sustainable and flexible modes of transportation. In order to do so, authorities and physical planners must work together to find viable solutions to incorporate in the infrastructure and offer alternative transport modes ? such as walking, cycling and public transportation. The purpose of this thesis is to examine the development of the cycling infrastructure in the city of Västerås and whether it is possible to expand bicycle commuting alongside public transportation. The thesis consequently aims to study how different physical planners within Västerås municipality work with traffic related questions.

In cooperation with the Gislaved company Lerocon AB [1], a separation module wasdesigned as a further supplement to the Module System. The aim of theprojectimplementation was that the separation module could be flexible enough to feed themetal pieces, screws, nuts and other items with large variations of size, appearance andmaterial composition. The module should also be cost effective to manufacture.A separation module is a design which is ment to streamline the work in industries withautomation of the lineoperations. The module feeds the details such as screws, nuts, washersand pieces of metal in a continuous flow in which traps separate the details from each other.Traps may vary depending on the purpose and of the details that are fed. Perhaps it isimportant for the user that the detail-orientation is right after the separation module, whichmeans that all the pieces witch aren´t are fed back in return.For companies and industries in lineoperations that can be made more efficient withautomation, are production flow an important watchword.

Bravida is one of Scandinavia's leading suppliers of technical installations and services. According to Bravida an installer loses around 35 per cent of their daily work. It?s the time aspect that?s going to be examined in this thesis. The purpose of this thesis is that the student in question is to investigate the activities of the installers that works with this project, identifying where and how time losses occur and come up with suggestions for improvement.Methods used in this work is literature studies, observational studies and interviews.

In the 2011th Swedish football league three games were suspended because ofbangers that exploded on the terraces. The first suspended match was played by Syrianska and AIK. We have performed an image analysis of two of Sweden?s biggest newspapers, Aftonbladet and Dagens Nyheter, to see how they reported fromthat incident. The reports from the first incident are important because the mediareporting from the first incident might have determined the attitude of the press and the Swedish football association (SvFF) towards the supporters for the remainder of the season.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.