This master thesis is one part of a project, called ?StabSim?, with the purpose to develop a simulation model for the align and stabilisation system in main battle tank 122. The origin of this project is that it should be possible to make control analysis without risking any hardware. Besides that it will be easy to change components in order to investigate the behaviour of the system. The report includes modelling of tower and weapon mechanics and also the modelling of the synchronous motors, which control these.

In offshore oil production FMC Subsea systems use a product called cap. The cap´s mainly task is to protect hubface and seal areas on inboard hub against dirt, corrosion and mechanical damage under installation of a subsea system. A new model of a cap has been designed and analysed using finite element method. The model is called KC3-12 and has a new function, emergency release, which is a backup method for the ROV (remote operated vehicle) to release the cap from the hubface when it is placed under water. The cap KC3-12 was found to fulfil the criteria under the test load pressure, according to ASME VIII, div2.

Abstract:Title: Engelska (Svenska)Number of pages: 40 (47 including appendix)Author: Carl StrandTutor: Göran SvenssonCourse: Media and Communication Studies CPeriod: Fall 2005University: Division of Media and Communication, Department of Information Science, Uppsala UniversityPurpose/Aim: The purpose of this essay is to analyze how young people, in the ages 18 to 25, relate to the subject of file sharing, and what their attitudes to this phenomenon are. I aim to describe how they use file sharing, their knowledge about it, how their usage have changed due to the new copyright law, what their stands are on the question of resource control and management on the Internet, and what they think of the future of file sharing.Material/Method: The method being used is a qualitative focus group interview model, used to investigate how young people look at the subject of file sharing. The results of the interviews is then applied to a theoretical framework based on thoughts of Denis McQuail, Lawrence Lessig concerning creativity, copyright, resource management and file sharing on the InternetMain Results: My conclusion is that the widespread file sharing habits of young people is not only caused by the temptation of getting free stuff, but of the lack of commercial and legal alternatives. Youths are willing to pay for media if the distribution is superior to the illegal file sharing alternative. They are a generation of young people that has grown up in a society where the tendency in many fields has been to make everything faster and more effective.

The following report is a constructive responsive evaluation of Svalövs communes unit for newly arrived refugees based on a qualitative user- and stakeholder model. The main purpose is to evaluate the units? quality from a user and stakeholder perspective. The main findings are that the users and stakeholders are satisfied with the quality of the units? services but request further social and structural participation.

Integration is a phenomena that occurs in all societies that experience any form of immigration. This process is dependent on how we analyze, both the groups of immigrants, and how we analyze the society in which they becoming integrated.Intersectionality is one method of analyzing this framework. By applying the categories: gender, class and race on the integration process, we get a more complex picture of the subject. Therefore we also become more able to adjust the actions and arrangement around the different questions of inte-gration.In this essay I try to explain what the intersectionality is, how it is used and how it can apply in integration as a specific subject. I also apply the intersectionality model on different policy documents from Malmö, Vellinge and Landskrona to find out if they show any awareness of this model both explicitly and implicitly..

Ellos was founded in 1947 by Olle Blomqvist and quickly grew into one of the leading mailorder businesses in Sweden. Ellos Group is in the current situation Scandinavia?s largest ecommercecompany and since 1997 owned by the French holding company Keering. Thismeant that Ellos became a part of Redcats Nordic along with brands such as La Redoute,Verbaudet , Daxon and others.2010 started a project with the aim to develop a logistic model for these products. The resultwas the department Redmap on Ellos that would serve as both a hub and distribution channelfor Northern Europe.

Latent heat storage is a way to store thermal energy when a phase change material undergoes a phase change. The advantage of latent heat storage is the capability to store more energy per mass unit than other heat storage methods. The most commonly used phase change in latent heat storage is the transition between solid and liquid. Phase change materials can be divided into organics, inorganics and eutectics.In the Nordic electricity market the price of electricity is set every hour by Nordpool spot, which leads to price fluctuations because of changes in demand. The main goal of this report is to create a latent heat storage system in a single-family home and investigate the possibility to save money by charging the latent heat storage system when the price of electricity is low, and discharge when the price is high.The thermodynamic model consisted of a ?tube-in-tube? heat exchanger with phase change material in the outer tube and water as the heat transfer fluid in the inner tube.

Background: Increasingly, companies choose to finance their business with corporate bonds which has resulted in an increased demand on credit ratings. As such the rating agencies have a very important role in the financial markets. Examining the value of a credit-rating can be very interesting for both issuer and investor. Purpose: The purpose of the study is to identify and define the value of rating. Execution: The study is built upon nine interviews with rated and non-rated firms and investors.

The  construction  industry  is  a  costly  business  such  in  respect  of  capital  for  most construction defects which then require rework, tear down and rebuild again. This study is  meaningful  awareness  of  tools  that  can  reduce  this  best  through  communication  and information sharing between the parties.  The  construction  industry  is  known  as  temporary  projects  organizations,  where  the construction  project  consists  of  several  actors  who  have  to  communicate  and  share information  between  them  to  avoid  mistakes  later  in  the  build  time.  These  actors  are bounded together thus for the duration of the project, then broken when the project has reached its end. The challenge here is for these actors to apply a tool that can help and simplify communications, information sharing, and perhaps the most important aspect is to  create  a  routine  for  the  association  and  the  shattering  of  these  actors.  To  implement such  behavior  using  a  tool  such  as  BIM  in  the  industry  whose  size  perhaps  is indescribable may be a very hard task.  BIM (Building Information Model) could be seen as the solution to this problem because it  acts  as  a  portal  where  the  actors  involved  must  sign  in  and  communicate,  share information, and eventually create a behavior, a routine for this association and division of  the  actors  following  the  end  of  the  project.  The  technology  could  help  the  involved from  the  beginning  of  the  project,  already  in  the  model  stage,  break  down  and  prevent any construction barriers when the building has been placed in the works.

This exam is about student?s perception of food and dietary advice. I illustrate food and eating from the youth's own perspective. The aim is to investigate how students perceive as "good" diet. It also reveals that students at the surveyed schools have poor knowledge of what is plate model.

Flow measurement is one of the greatest challenges in order to calculate efficiency in hydropower. Most hydropower plants in Sweden use differential pressure methods for flow measurement. These methods are dependent on constant conditions in the waterways. A change in these conditions, like turbine improvements, prevents differential pressure methods to verify efficiency improvements. Since efficiency improvements can?t be verified by one measurement system, another method, which isn?t affected by changing conditions, can be used.

The electric vehicle market has potential to contribute to Sweden?s national goal to have a fossil fuel independent transport sector by 2030. However, the market answers to a lot of challenges making it difficult for the market to fully reach its potential. The volume of electric vehicles has seen a steady increase during the last year (2012), although many of these vehicles are mostly for PR purposes or bought by the public sector that wants to lead by example. Still, barriers in the form of high purchase costs, an anxiety for the limited battery capacity and the lack of standardisation are some of the problems that the market is struggling to solve.

The purpose of my project was to explore variability. I wanted to combine different ways of sitting and create some kind of seating furniture that could be changed to fit different kinds of situations and needs. I sought after a way to express safety and stability in the seating furniture and at the same time make it clear that it could be changed into something else or something more. It was very important to me that the furniture piece would have a long lifetime and would be something you kept for a long period of time. I decided that the changeable factor in my piece would be the possibility to change it from being a chair for one person into being a bench for two people.

This thesis aims to present the essential background on how to perform climate changeimpact assessments, and to present the results from a climate impact assessment on waterbalance and nitrate leaching for an arable Swedish soil. The soil is a sandy soil in southwesternSweden, grown with spring cereals. This study is meant to be a benchmark example,and cannot be seen as a regional or national assessment for Sweden, rather as an approachto present and analyze the most important parts of these kinds of assessments.A dynamical simulation model (COUP, Jansson and Karlberg, 2004) was used for thisstudy. The model was parameterized and calibrated against data from an experimental site,located in Mellby in Hallands county, south western Sweden. Measurements were carriedout between 1st of April 1988 and 1st of April 1991.

Today there are commercially available databases with active features, i.e. active mechanisms are available for development of information systems. But the usage of active mechanisms is low in practice. This is due to the insufficient methodological support in analysis and design for developing ECA rule based software. It has been proposed that one of the most suitable ways to tackle this problem is not to develop new methods but to extend existing methodologies.In this thesis an extension of the Object Modeling Technique (OMT) is developed, called OMT-A, which is able to model active rules.