During 2006 an estimated number of 150 persons are supposed to have been killed in road accidents caused by speed limit violations. Through Automatic traffic security control (ATK) the Swedish road administration (Vägverket) is working towards lowering the number of speed related accidents. By placing the speed cameras on roads they've managed to lower the average speed at those places. The enlargement of the number of speed cameras is based upon knowledge about for example how high the risk is for speed related accidents on the roads. The speed cameras always measure the speed in which every vehicle passes, but aren't constantly activated to register speed violations.

BACKGROUND: Project based structures has become more and more common in the organizations of today. As the project based structures are given a more central role in the organizations the interdependencies between the projects are getting more attention. These structures need a new type of control to meet the unique challenges that arise. The researchthat has been done has been concentrated around the project form and the projects internal control, the area of multi-project management is therefore relatively unexplored. The few existing studies on the subject focus on projects in the construction industry why research inmore complex fields of business have been requested.PURPOSE: The purpose of this thesis is to explore and analyze how knowledge intense multi-project organizations manage their project activities, and to determine how different organizational characteristics affect the need for management control systems.METHODOLOGY: The empirical data has been collected through interviews with personnel in BT Products R&D, Gambro R&D and AstraZeneca Development.

 The current estimations in regards to the increase in environmental threats underline the importance of influencing individual behavior towards a more sustainable lifestyle. At the same time current trends show an increasing interest into ecologically produced foods around the world and that the consumption has seen a major rise in the 20th century. It is therefore of great importance that companies show their interest and commitment in order to offer and influence the consumer into choosing the environmentally sustainable alternative. Also, in order to properly reach out to the consumers, it is of outmost importance to map out their attitude towards these types of products. It is equally important, in order to fully realize the potential of successful positioning, to show an understanding for the underlying decision processes that dictates purchase.

This thesis of 15 hp has been implemented at Halmstad University, incollaboration with Saab Dynamics in Linköping. Saab Dynamics is a companyoperating in the defence industry where competition is tough. This necessitatesnew ways to increase efficiency in the company, which is the basis for this thesis.Saab Dynamics wants to introduce simulation driven design. Since SaabDynamics engineers have little experience of simulation, required a usermethodology with clear guidelines. Due to lack of time, they chose to assign thetask to students, which resulted in this thesis.The aim of the thesis is to develop a methodology in mechanical design, wherethe designer uses the FE analysis early in the design process to develop thestructures' mechanical properties.

The complex, ever growing and changing environment, requires that today's organizations are dynamic and willing to change in order to stand competitive.This awareness has made change number one priority in almost all organizations' agenda.We live in a world that is constantly changing, yet many organizations fail to change successfully. When a change occurs in complex environments with multiple stakeholders, it immediately increases the complexity and the challenges of the change process.A complex situation may arise when, for example, partial outsourcing of the corporate information system infrastructure. Two of the most difficult challenges that organizations face today is to conduct a successful change process and managing the effect of a change, such as arising expectations. It is very common for change in an organization not to achieve the desired result or that they even fail. There may be a lot of reasons for these failures.

Every spring you can see newborn foals running on fields among the mare. But some unfortunate end up visiting the equine hospital requiring surgery. This is a challenge for the anesthetist because of the neonatal foal?s unique physiology. Therefore you need to take these differences under consideration when you anesthetize foals.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

Organizational democracy has been a popular research area in recent decades but the implementation in real organizations is slow (Kokkinidis, 2012; Verdorfer, Weber, Unter Rainer & Seyr, 2013). Several researchers (Schön Jansson, 2012; Falkheimer, Heide & Johansson, 2013) argue that communication practitioners have a key role in democratic processes and that because their job role is under constant change there are only a few modern studies regarding the subject. The purpose of this study is to illustrate how communication practitioners in private and public organizations experience their role in the process of internal communication and to what extent they are aware of, and work with internal organizational democracy.The practitioners we interviewed had a strong feeling that they were a support function for the business and the organizational management. As a result of the study it is clear that communication practitioners are very loyal to their employers and to the organization they work for. They are, therefore, not neutral in their professional role and argue that their task is to represent the management's interests.

In this project I have created a design for the delivery rooms of Swedish hospitals with the psychological aspects ofbirthgiving in focus. This is something that I think the delivery rooms lack and so far it has been the midwifes job to,without any tools, give the women in labor the mental support and encouragement they need.My goal was to give the midwifes a tool to work with when it comes to encouragement, something helping themhelping the woman to feel safe and relaxed, strengthened, informed and in control of the situation.I choose to focus on the difficulties measuring the physical work the woman in labour had done and what was leftof the labour. I wanted to visualize the process of the birth, allowing the woman to see and being able to focus onwhere during the labour she is, how far she has left and also being strengthened by the amount of work already managed.Further I wanted to make the woman feel invited to take control over the birth and the room in which she isin labour. I wanted her to be able ? if she wanted ? to make her own settings of the mood in the room, deciding forherself if she wanted a more relaxed environment or perhaps a more energetic.

Today?s society is one where technological advances are made daily, which increases the need to stop and assess the risks against users? integrity when integrating new technology in contemporary systems all the greater. We have taken two technologies, Near Field Communication and Certified Wireless USB, whose envisioned area of use is to be integrated into mobile phones, and evaluated what security threats are revealed for the respective technologies. The threats against security have been identified through research of the standards and existing reports for each technology. Practical experiments have not been conducted on account of us not having access to any equipment to run such trials.

This thesis concerns waste management on construction sites and was conducted on behalf of ICA Fastigheter.Areas of concern:How can an environmentally-efficient waste management system on construction sites be defined? What potential exists for exploiting the waste resources that are generated?How can the waste management be optimised by reducing the quantity of waste and by optimal sorting?How can the client of a project influence the waste management?The purpose of the work was to investigate sustainable waste management in the building and construction sector and to highlight waste as a resource from an environmental and economic perspective.The aim of the work was to define an environmentally-efficient waste management system, to analyse the potential that exists in waste management and to draw up guidelines for optimal waste management.The method consisted of a literature study, two visits to construction sites and four interviews.An environmentally-efficient waste management system means that the waste is managed in the following order of priority:Prevention     Reuse  Recycling     Energy recoveryLandfill     The prevention of waste is an important area that has not been adequately explored by the building and construction industry. The quantities of waste could decrease with the implementation of measures such as ordering materials in the dimensions required, prefabricated components, logistics centres with Just-In-Time deliveries, less and improved packaging and less wrapping. The reuse of waste materials and temporary apparatus as well as the use of a return pallet system are examples of reuse that reduces the quantities of waste.In most cases the source sorting work is a matter of course and the proportion going to landfill is down at a low level. The source sorting can be optimised by sorting all materials that can be reused and recycled to use them as a resource.

The task was to design and manufacture a submersible displacement pump working with the wobble plate principle. The main task for the Wobble plate pump is to be used as a sewage pump for smaller households or dewatering pump in environments where small flows and high pressures are acquired. For these purposes ITT Flygt sell a screw pump, PC-Grinder 3068. The hydraulic part of the PC-Grinder is manufactured by a subcontractor. Therefore ITT Flygt wants to evaluate an alternative to their screwpump PC-Grinder, which can be entirely manufactured by them self.

In the early 1990?s more and more companies of the Swedish public sector were exposed to competition, and this started the debate on how such actions might affect the business and even society.The first chapter examines how the public sector and especially health care, is financed and managed. We also explore what it means to be exposed to competition and find that there are many different ways of exposing the public sector to competition. The study examines dental care as an example of a market with both publicly and privately owned companies. The purpose of this paper is to explore how publicly and privately owned health care companies view their relationship with their consumers.

The number of ideas at innovative companies usually exceeds the amount of available human ormaterial recourses, this include ideas for development of new products. Since they are not able to doeverything they want to do they have to choose between ideas to develop new products. This includesthe decision on when to start, stop or kill a project as well as the thought process of prioritizing betweenongoing and potential projects.Project Portfolio Management (PPM) is an organizational process, with the purpose of systematicallyorganizing and running the activities that aim to evaluate, select and prioritize ideas and projects fordeveloping new products. PPM include four major goals to be fulfilled; Maximizing Value of thePortfolio, Achieving a Balanced Portfolio, Achieving a Strategic Alignment and Running the RightNumber of Projects.The purpose of the thesis was to develop a more visual and formal PPM process for the early stages inproduct development in one department at St Jude Medical AB, Sweden.The thesis was conducted by following a methodology known as Process Modules. The methodology isan approach for developing a PPM process that fits a specific company.

Authors: Daniel Kirby & Émelie Vangen LindgrenTitle: Controlling the WordLevel: Bachelor of JournalismLocation: University of GothenburgLanguage: SwedishNumber of pages: 29The largest arena for public debate in Sweden is the television show Debatt, airing every week on SVT: Sweden?s public service network. Every episode has an audience at around 500.000 viewers. Because the channel is under the rules of the public service agreement, strict rules of diversity are applied.The purpose of this study is to examine the gender representation in Debatt; to investigate how men and women behave in the context of the televised debate and to see if the programme has managed to reflect an equal representation of the voices of men and women.We did this by performing a quantitative content analysis of four different episodes of Debatt, with 4 different hosts ? two women hosts and two men.