Micro-power wind energy convertors have recently increased in popularity. The reasons for this are among other things the increasing cost of electric energy and enviromental concern.In this thesis the connection of these micro-power wind energy convertors to the utility network is discussed. Electric standards for the connection of small production units is presented. Finally some calculations and measurements of electric quality are also presented. The utility network used in the calculations is part of Halmstad Energi och Miljö network..

Since Sweden joined the European Union all Swedish fruit and vegetables are classified according to EU Quality standards. One important function is the product description and how it can facilitate the trade; for example in better comparing prices and also to guarantee the quality of the product. This quality standards or product descriptions are written as words of an Act and obligatory for all countries that has joined the EU. It?s often a demand from the customers to be certificated according to some of many certificating systems. One example is the common worldwide GLOBAL GAP-certification system created by the organisation EUREP which represents the leading European retail traders.

The purpose of this study is to find out how housebuilding meets the demands of availability for people with some sort of disability. The rules and demands of availability are stated in Boverkets byggregler, BBR and the Swedish standard, SS 91 42 21:2006 (publ.5). The projects in this study are compared to the rules and demands of BBR and SS 91 42 21:2006 (publ.5). The rapport studies three different house projects in three different municipalities and the result shows that only three of these nine projects meet the demands of availability for disabled people..

Today´s roofing of dwelling houses is a very time consuming procedure, which includes a lot of different steps on the construction site. Not only does it cost a lot of money, but often do problems with rot and mold occur in the attics of houses today. The use of prefabricated modules has seen a great breakthrough in the field of construction of dwelling houses; at least when it comes to foundations and walls, where this type of approach makes the construction process way more efficient. What no one previous has succeeded to develop is a corresponding system for roofs that meets the demands of a dwelling house. Accordingly the goal of PlusTak has been to come up with a proper module system for roofing of dwelling houses, where the roofing is completed to meet the demands of the Scandinavian market. During the project a lot of effort has been put into customer contacts and the usability of the product, as well in the manufacturing process as on the construction site. This development has gone hand in hand with several practical tests and tryouts.

The object of the essay was to investigate the argumentation in the bill, the comments from unions and the authorities, among others and the motions concerning the bill. To analysis this argumentation I have been using feminist theory, specifically Carole Lee Bacchis ?What?s the problem?-aproach. I also used Maud Eduards and Diane Sainsbury to complete my theory. They describe men as the norm of the society and women as deviant.

The current standards for design of steel beams are divided into four classes based on the slenderness of cross-sectional parts. Depending on the section class a beams load capacity is either determined by a plastic, elastic or a reduced elastic model. The division between cross-sections calculated by a plastic and an elastic model is today done in a very harsh way with no smooth transition. This leads to a large difference in the calculated resistance for the sections located near the class limits. Elasto-plastic sections are in the current situation calculated as purely elastic and their large plastic reserve is not considered in the current standards.

AbstractWhen I, at the age of 20, started working in home care service, I had an idea of what it means to age, a view witch I quickly realized was not true at all. The essay begins with a search for the images of aging you come in contact with, when you do not have a deeper interest in the matter.I take a closer look at how aging is described and how the concepts of aging and dignity are often interconnected, and debate about which images of aging that is outdated and where from they originated.I also show that that image is in for a change, much is happening right now, and there are many like me, who want to change and broaden the view of what aging can mean.Finally I describe my sculptures ?Beatrice? and ?Rosmari?, and reflect on how they relate to the image of what old age looks like.As a sculptor, I want to create an alternative to a widespread image of old people as a problem or idealization of the olf lady as a kind, cute and cookiebaking creature, as well as an alternative to the traditional sculpture tradition, that often show men in positions of power, and sweet passive women/girls.I tell of the strong, stubborn, eccentric and absolutely ordinary lady.

This master thesis examines the development of the two earlier independent IR protocols Z39.50 and SR (Search and Retrieve, ISO 10162/10163), now Z39.50/SR, from the beginning of the 80s to 1996 and their functionality in the client/server environment.Z39.50 applications in library systems will allow easy access to information regardless of platform or location. The use of Z39.50 will create a new user environment. Almost all the library systems of the market support the Z39.50 and surprisingly the use of it in Sweden lied on a very low leve! in 1996. This thesis was followed-up by an interview and a questioner among the Swedish Z39.50 users. They could see a huge potential of development concerning the future IR process.

Outsourcing är ett begrepp som blir allt vanligare i företag. Ett vanligt argument för att man väljer att outsourca vissa delar av verksamheten, är att det ger en möjlighet till att fokusera på kärnverksamheten och därmed uppnå större konkurrenskraft. Studien syftar till att undersöka hur externa designers kan skapa en visuell identitet på produkten, samt vilka faktorer är viktiga då externa designers ersätter en in-house designavdelning. En kvalitativ fallstudie har genomförts på DUKA, Axcent of Scandinavia och Gant. I dessa fall har alla på något sätt kontrakterat ut antingen hela eller delar av sin designverksamhet.

This report brings up the question - ?Is BIM profitable when planning a single-family home??.The methodology for finding the answer to this question is firstly to state the definitions of BIMand the company that is projecting by using the BIM-model. The answer is then obtained byanalyses of the factors of profitability with respect to: time, opportunity of revision, problemvisualization, preference adjustments and energy. A BIM-model has been made simultaneously asthe writing has proceeded to get a perception of how a BIM-model really matters for the analysis.The analysis shows that the answer for the question depends on further factors. The factors thatare mostly discussed are the company?s intentions and the complexity of the house.

The foundation for this thesis lies in whether or not, and how, the body representation in printed commercials, specific products directed to the body (shampoo, body lotion etc.), has changed during the last fifty years. Four years have been chosen because of the changes in society that we believe might have had an impact. The commercials that have been picked out are the ones that best represent the general view of the body. We have found that the changes when it comes to body presentation has followed the social development to a certain degree, but it is difficult to say how much the society has had an affect on the body ideal in advertising. Representations of the male body is something that has escalated since the early 70?s, fifteen years earlier few commercials was made with male models, and the few there were, never showed more than the face.

Prefabricering eller platsbyggt hus? Många ställer sig den frågan. Vad finns det för fördelar respektive nackdelar med prefabgentemot platsbyggt hus? Vilka ritningar behövs och hur går man tillväga?Detta examensarbete är en framtagning på hur man anpassar ett småhus till prefabricering.Platsbyggt hus är ett hus som byggs på plats. Material fraktas dit, förvaras och kapas.Den vanligaste byggmetoden för byggande av hus.Prefabricering av hus är däremot ett hus som byggs i en fabrik eller industri.

Detta examensarbete har utförts vid Linköpings universitet i samarbete med Scania Transmission i Södertälje och behandlar kravsättning av ytstrukturer samt processer för hårdbearbetning av kugghjul och axlar. Aktuella artikelritningar innefattar endast krav för Ra-värde, den aritmetiska medelavvikelsen för ytjämnhetsprofilen (R-profilen). Förslag på nya parametrar enligt av Scania tillämpade SS-EN ISO standards har tagits fram, detta för att ge en noggrannare beskrivning av vilken ytstruktur som skall uppnås. Resultatet är generellt tillämpningsbart men fokuseras mot kugghjulens hål, plan och diametrar. Vidare presenteras en jämförelse mellan metoder så att transmissionsverkstäderna kan tillverka kugghjul/axlar på ett kostnadseffektivare sätt.

Before the European construction standards were introduced in January 2011, it was mainly themethod in BBK04 that was used for calculating punching capacity in concrete structures, and in lesscommon cases the method in BHB. The method of BBK04 is easy to use and have had the samestructure since the first was published in 1979. The Concrete handbook method (BHB) where usuallyonly used when a higher punching capacity was needed and the cross-sectional height where fixed,calculations using this method entails more work, but will in return usually give a higher capacity. Italso allows the use of shear reinforcement to increase the cross-section capacity. The method ofcalculating punching shear in EC2 differs largely from the methods of BBK04 and BHB.

The following essay aims to determine what textbooks and teaching media educators in the county of Västerbotten use when teaching the relation between religion and science. Based on educational science theory and through analyzes of factual texts, the teaching materials was examined to determine how much focus they put on the thematic of religion and science. The result shows how the different teaching materials affect this thematic differently. The main conclusion is therefore that students in Sweden could, depending on the teaching materials used in their education, be taught by different standards to reach the same requirements..