WSP building physics in Stockholm has certified the preschool Temmelburken in Bromma with the system of certification Miljöbyggnad. The rating of the building became BRONZE. In this thesis the preschool has been investigated with respect to the three areas: thermal climate, use of energy and improving of the level of certification. The thermal climate at the preschool has been investigated by a questionnaire survey and by measurements in order to do comparisons between the results from the two investigations as well as with the results of the simulations that WSP has done at the certification of the preschool. The differences between the results from the simulations and the questionnaire survey for winter as well as from the measurement performed with a comfort meter the 19th of March are concidered to be reasonably small since they give rise to the same rating according to Miljöbyggnad.   Operational data for the use of energy for the preschool have been obtained in order to do comparisons with simulations performed by WSP and Svenska Besiktningar AB. The comparison shows that the simulated values for the specific use of energy are lower than what the real specific use of energy would be for the preschool, since just the operational data for the heat energy is higher than the simulated values. At the investigation of the possibility of improving the level of certification it was found that the rating of the preschool can be raised from BRONZE to SILVER by improving the ratings of the ?thermal climate summer? and the ?daylight?.

We have different kinds of signal processing everywhere around us in our everyday life, in our cellphones, when we are listening to music, watching TV etc. This makes signal processing a very interesting and important technical area, where the demand of skilled engineers sets the limit of what is possible.Working with signal processing requires in-depth knowledge in areas such as mathematics, physics, electronics, and other related areas. For this, it has traditionally been demanded by a talented developer to also master the advanced programming languages such as C / C + + and Assembler.This has begun to change; today there are several companies that offer graphical development environments for signal processing, environments where programming skills are not needed anymore, and the focus can be on signal processing instead.The goal with this project is to build a corresponding graphical development environment to reach an understanding of what is required of these systems, and also to grasp what opportunities that are available within graphic programming. Inspiration for the work has partly arise from some of the tools available on the market, and partly from previous theses that have been written about graphic programming.The challenge lies in creating a program that can execute signal diagrams in real time from given signal blocks, and be able to handle feedback loops in an efficient way and to do so at the lowest "cost" in terms of clock cycles as possible. This should also be compared against to code, compile and run a complete signal diagram directly.To increase the usability it should also be possibility to externally manage in real time the parameters of the signal diagram during execution.The interface is a separate program, which is to some extent similar to Matlab Simulink, where a signal diagram is drawn up graphically by connecting wires between different signal blocks.

Constantly growing demands from the costumers in the Automotive industry forces the subcontractors to seek alternative ways to compete. One parameter of quality is the components tolerance against NVH(Noise, Vibraion & Harshness) aspects. Kongsbergs Automotive has developed a new gear shifter platform (Shift-by-Wire) that is sold to Alfa Romeo and used in of their car models. However, the company is not pleased with the components sound quality, therefore the main purpose of this thesis is to develope a number of concepts that is supposed to enhance these NVH-aspects.To get an understanding of the problem an analysis of the causes of the emitted sound has been done parallell to a product decomposition, function decomposition and a Ishikawa-diagram. Together with these methods has a litterature study been performed to get familiar with the physics of an impact and especially the emittment of noise.

In this project a LC-MS-method for the analysis of gamma-hydroxybutyrate, gamma-butyrolactone, 1,4-butanediol, amphetamine and methadone was developed.Initially, the efficiency of the ionisation of the analytes was evaluated with respect to the ionisation technique (ESI, APCI and APPI) and the composition of the mobile phase. In the next step a number of different columns was tested in order to find the one with the greatest potential for separation of the substances in question. Using the selected column, the separation was optimised by means of experimental design and the software The Unscrambler 7.8. The parameters studied were the flow rate, the column temperature and the mobile phase composition. The response variables were the resolution between the target compounds and the retention time of the last eluting compound.These experiments showed that, in order to obtain the best ionisation, the mobile phase should consist of 5 mM formic acid in water and acetonitrile.

Storage of biomass is often associated with problems such as heat development, dry matter losses and reduction of fuel quality. The rise in temperature can potentially cause a risk of self-ignition in the fuel storage. Moreover, emissions from storage piles can cause health problems in the surrounding. The dry matter losses and reduction of fuel quality can have economical effects. The aim of this thesis project is to develop guidelines on how to store large amount of biomass at Vattenfalls heat and power plants in an optimal way.

Utifrån arbetsmodellen Learning study, med variationsteorin som utgångspunkt har forskning genomförts i två klasser i Sverige med syftet att försöka identifiera kritiska aspekterna för elever i årskurs nio inom ämnesområdet det vita ljuset och dess färgspektrum. Studien är en vidareutveckling av en tidigare genomförd studie i Hong Kong och har därför även haft till syfte att undersöka om de identifierade kritiska aspekterna är generaliserbara från en skolkontext till en annan kontext.Den svenska skolan styrs nationellt utifrån styrdokument, skollag, läroplan och kursplan för skolämnet och läraren har även riktlinjer för att få en yrkesetisk förankring. Dessa delar är viktiga att läraren tar i beaktning inför planering av undervisningen. Elevernas bakgrund och förkunskaper i ämnet är av stor vikt för läraren att ta hänsyn till för att de ska kunna ta till sig undervisningen om det som läraren har tänkt att de ska lära sig.I denna studie kunde åtta kritiska aspekter identifieras i de två klasser som undersökningen genomfördes i. Fem av de kritiska aspekterna var redan identifierade i Hong Kong.

I fo?ljande arbete underso?ks en partikelbaserad simuleringsmetod som kallas Fluid-partikelmetoden, FPM. FPM a?r designad fo?r att simulera komplexa fluiders beteenden pa? mesoskalan, vilken sammanla?nkar kontinuumskalan med den molekyla?ra skalan. Metoden utvecklades av Pep Espan?ol i slutet av 1990-talet och a?r en vidareutveckling och generallisering av Dissipative Particle Dynamics som togs fram av Hoogerbrugge och Koelman under tidigt 1990-tal.

Eutrophication is an environmental problem that affects more than ten percent of Swedish lakes. Excess nutrients increase the growth of algae, and cause major problems in the ecosystem through oxygen-free bottoms, fish kills, and at worst dead bottoms. Agriculture accounts for 44% of human emissions of phosphorus to lakes and rivers. Leaching occurs of particle bound phosphorus and of dissolved phosphate. The amount of phosphate in the soil solution that may be leached is partly due to the prevailing pH in the soil solution. The purpose of this study was to investigate how the relationship between phosphate solubility and pH was affected by liming.

This report is the result of a degree project in building engineering, at an advanced level. The project evaluated a building from a technical and historical point of view, and focused on its energy consumption, particularly the energy used for heating. The building in question was a small apartment building in Strömsholm, Sweden. It was made in 1902, from vertical logs, a not so common form of the traditional log house. The goal of the project was to evaluate if the energy consumption could be reduced in accordance with building preservation regulations, that is without damaging any of the building?s cultural or historical values.The building was surveyed with the help of archive and literature studies, interviews and inspections.

This diploma work was performed at the department for radiation physics at the Health University in Linköping. Its aim was to develop a method to retrospectively quantify the absorbed dose in coral. Coral is a material which suites well as a retrospective dosimeter because when exposed to radioactivity its induced free radicals are stable in time. The number of radicals is proportional to the accumulated dose so the dose can be calculated by quantifying the radicals. Therefore, coral can tell us something about the past environment and also be used in dating purposes.A young, modern coral from the Red Sea was studied and also a fossil one which I was given from the Natural History Museum in Stockholm.

TitleEnergy-efficiency ? of slab blocks built in the sixtiesAuthorsRichard Sandahl and Kim SöderbergEducationHalmstad University, Section for economy and technique Construction Engineering 180 ECTSSupervisorMargaretha Borgström, Universitylector construction physics, Halmstad UniversityContact person at HFABUlf Johansson Heating, sanitation and energy co-ordinatorReportExamination paper at the construction engineering program is performed in cooperation with HFAB (Halmstad real estate concern Inc.)AimThis examinations work is done in cooperation with HFAB and there project on the block around the street Maratonvägen. HFAB:s dwelling stock on this area are going through a bigger renovation and in relation to this they are looking on the possibilities to make this building more energy efficient. That is why this examination paper has as purpose to answer the question if it is possible to make slab blocks built in the sixties more energy efficient. This is done by calculate energy efficient measures on a chosen apartment block at Maratonvägen in Halmstad, in an energy and expense perspective.MethodThe examination paper is based on different methods, mainly calculation but also qualitative conversation studies, economic calculations and literature studies.

Vi har under vår verksamhetsförlagda utbildning, utifrån egna erfarenheter och genom att läsa forskning fått en förståelse för att barns föreställningar om naturvetenskapliga fenomen inte stämmer överens med verkligheten. Det har också gett oss en uppfattning om att det saknas läromedel inom astronomi för barn i de yngre åldrarna. Grundat utifrån detta valde vi att utveckla ett läromedel inom astronomi.Läromedlet är tänkt att vara lättillgängligt och lättanvänt för lärare, samt att läromedlet ska uppfylla ett av de centrala kraven i Lgr 11 för årskurs 1 till 3 inom naturvetenskap: ?Jordens, solens och månens rörelser i förhållande till varandra. Månens olika faser?.För att kunna ta reda på vad ett bra läromedel är och på så sätt få tips till vårt eget så genomfördes en enkät på våra partnerskolor.

Concrete is one of the world?s most common construction materials and is composed of 70-80 % stone material. Today crushed stone is used as aggregate in concrete in order to replace natural aggregates due to strong environmental reasons. Stone crushing yields flaky material and in this thesis studies are made on the flaky particle shape and how it influence properties of concrete such as workability, rheology and strength. The concrete recipes used in this thesis have fixed values, the only variable is the flakiness of the crushed stone.

AbstractA continuous improvement of products and production is an important goal for a modern industrial company. A small engineering group located in Sweden came in touch with the authors of this report during the spring semester of 2014. The aim of this report is, as part of the group´s ambition of improvement, to analyse ways in which the quality of component casted parts can be verified. Non-destructive testing (NDT), and methods to use it for quality control, is the main focus of this report. However, fields such as material standards, component casting and quality engineering are analysed as well.

Injuries and sick-leave is a common feature for reinforcement workers today. This is mainlydue to the fact that reinforcement work is done in an exposed environment with many stressfactors and highly repetitive work. These operations are often carried out in unsuitableworking positions, these positions creates a major burden on the bones and joints and causesmicro- damages on muscles. With repetitive work these injuries are not given time to healproperly and will gradually become worse.The body will not be able to handle the stress of working in a work environment such as thisand musculoskeletal disorders can be a result of this. The injury will make itself known aspain in the musculoskeletal system and causes reduced movability; the injured worker willtherefore not be able to perform the same work tasks as before.