This report is a thesis work for a B.Sc. in Forestry at the School for Forest Engineers, SLU. The work was an assignment from Jarlträ AB which is a privately owned sawmill located in southern Småland. The aim of the work was to investigate the economical result of different pricelists and how to adjust different parameters such as length correction to give an optimal result. The pricelists was examined through a computer program (SilviA). The pricelists was made in the program and after that a simulation was preformed with a selection of random sampled trees gathered from the area nearby the sawmill.

Most of the goats in the world exist in the developing countries where they are important in the meat industry. In Europe, goats are mostly kept for milk production although the interest for meat is growing. Goats have a thin carcass with only small amounts of intramuscular fat, which gives a lean meat. This thin subcutaneous fat cover can cause cold shortening when chilling the carcass. By using electrical stimulation cold shortening can be prevented.

In this thesis you will be able tofollow the design work of a drumtest. A tool that by having a rotatingdrum with equally positioned obstacleswill simulate the conditions a mountainbike rim will pass through.Initially there is a specification ofsome parameters and requirements thatthe design had to fulfill. There is alsosome brief background information aboutwhy a drum test is required for abicycle rim manufacturers and about thecompany Innolite Design AB that thisthesis is done for. After that itfollows an extract from conceptgeneration with the chosen concepts andsolutions but also some of the conceptsthat were not chosen.The thesis also contain a part where thereader cangain a deeper understanding of how thedesign works as well as some moredetailed facts about how the choice ofmaterials, their thicknesses, etc. havebeen made.

The aim of this thesis is to find a statistical model that sort logs according to a predicted modulus of elasticity on the sawn boards. The input parameters for the model are X-ray variables from an X-ray scanner. For some of the log classes sawn at the sawmill it is desirable to have a narrow distribution of modulus of elasticity on the sawn boards. 250 pine logs from five different diameter classes were numbered and followed through the sawmill process. Log data were collected from X-ray and 3-D scanners in the log intake.

The overall goal of this diploma work is to produce a design of a 5 GHz radio frontend using Agilent Advanced Design System (ADS) and then build a working prototype. Using this prototype to determine if RF circuits at 5 GHz can be successfully produced using distributed components on a laminate substrate. The design process for the radio front-end consists of two stages. In the first stage the distributed components are designed and simulated, and in the second stage all components are merged into a PCB. This PCB is then manufactured and assembled.

To investigate the possibilities for effective soil tillage, that could imply lower costs, lower negative environmental impact and in addition a meaningful occupation for foraging pigs, a field experiment was carried out in Gränna, Småland, during growing season 2006. The experiment contained two treatments that were repeated three times and were carried out on a couch grass-infected fallow on a light soil close to Sweden?s second largest lake, Vättern. Ploughing was one treatment and pig rooting followed by ploughing, was the other. The experiment was conducted according to the guidelines of organic growing and seedbed preparation was done the same way in the two treatments. The pigs, three groups of five half-year old Linderödssvin (an old Swedish breed), was encouraged to perform an even tillage by strip-grazing, i.e.

The number of weaned piglets per sow and year is a good measurement of sow productivity since it is affected by the number of piglets born alive, the pre weaning mortality (i.e. mortality of live born piglets between birth and weaning) and the number of litters per sow and year. This measure is also closely connected to the number of piglets produced per year, which partly determines the profitability of the piglet producer. During this study, eleven successful piglet-producing herds were visited. Eight of the producers were Swedish and three of the producers were Danish.

This thesis compares different methods for risk assessment of a creosote contaminated site in Vansbro, Dalarna. In a complementary study the importance of using representative data for calibration and validation of stationary groundwater models is discussed. The time dependency between surface water levels and groundwater levels on the site in Vansbro is evaluated by step response analysis. The results show that the groundwater levels reflect only long-term variation in the surface water levels. Hence the use of such long-term means for calibration and validation of the stationary groundwater models is the only theoretically defendable alternative.As a first step in the comparison of risk assessment methods the degree of contamination is evaluated on the basis of generic guideline values for contaminated soils, developed by the Swedish Environmental Protection Agency.

In this thesis you will be able tofollow the design work of a drumtest. A tool that by having a rotatingdrum with equally positioned obstacleswill simulate the conditions a mountainbike rim will pass through.Initially there is a specification ofsome parameters and requirements thatthe design had to fulfill. There is alsosome brief background information aboutwhy a drum test is required for abicycle rim manufacturers and about thecompany Innolite Design AB that thisthesis is done for. After that itfollows an extract from conceptgeneration with the chosen concepts andsolutions but also some of the conceptsthat were not chosen.The thesis also contain a part where thereader cangain a deeper understanding of how thedesign works as well as some moredetailed facts about how the choice ofmaterials, their thicknesses, etc. havebeen made.

In 1996 a hunting test for British gun dogs was started in Sweden, based on a similar one al-ready in place in Norway. The aim of the new test was to describe the hunting ability of the dog and to use the results as a basis for selection. However, up to now, no genetic study of these data has been done. Therefore the aim of this study was to estimate genetic parameters for the traits measured in the hunting test and to investigate whether the traits can summarized into fewer overall measures. Data from trails of British gundogs between 1996 and 2005 in Sweden were used to estimate genetic parameters and environmental effects in hunting performance. British gundogs consist of five different breeds: Pointer, English setter (ES), Gordon setter (GS), Irish red setter (Irl S) and Irish red and white setter.

I uppsatsen unders?ks vad som k?nnetecknar texter skrivna av nyanl?nda ungdomar inom spr?kintroduktion i relation till bed?mningsst?det Bygga svenska (BS). Utg?ngspunkten f?r analysen ?r elevernas skrivande i tv? genrer: ?tergivande och argumenterande. I dessa unders?ks grundl?ggande grammatisk spr?kbeh?rskning, utifr?n processbarhetsteorin, samt graden av skriftspr?klighet utifr?n f?rekomst av utbyggda nominalfraser och grammatiska metaforer (GM).

New technology makes it possible to remotely measure all consumers in a power network onan hourly basis and store the values in a database.This thesis work describes the conversion process between automatic meter reading systemMActor and calculation software Xpower.Then the possible differences between calculations of power networks using load curves incombination with a yearly estimate of consumption and calculations using hourly measuredvalues is examined.The result of the comparison shows that, for the power network under inspection, nosignificant difference could be noticed. This does not mean that calculations using hourlymeasured values would be unnecessary. I believe that in a near future calculations using hourmeasurements will be the primary choice for many power companies to whom technology isavailable.Also some basic calculations of fundamental power network parameters, such as power factorand loses, are presented using hourly measured distribution transformers in combinations withits hourly measured loads.The report is written in Swedish.

Upon marketing the system in Europe and the USA cost savings generated from reduced work force have been prevailing. Since the cost of labour is much lower in the Asia Pacific region other factors have to be stressed. The parameters of flexibility and quality assurance may however cover any initial investment in a production system. Our purpose is to value flexibility and quality in a manufacturing context, applied to DAS, in order to use it in investment calculations. In order to make an adequate estimation of different companies, due to problems associated with acquiring correct figures, the Key Success Factors needs to be examined so that the gathering of numbers can be conducted with more focus.

Since the demands from authorities regarding lower energy consumption havebecome increasingly strict, this puts new pressure on designers and builders, who notonly have to ensure an esthetically pleasing building, but also make sure it issufficiently efficient to pass under new laws and regulations.This thesis takes into consideration a wide range of various parameters and theireffect on a building?s energy consumption. For this evaluation a computer softwarecomparison between the two programs Autodesk Ecotect Analysis and AutodeskProject Vasari was performed.Autodesk Ecotect Analysis is better suited for studies made on individual factors whileAutodesk Project Vasari is better used in experiments regarding the geometricalshape of the stucture itself.The results from the two different software tools used, give us both differences andsimilarities. For instance, both software programs produced the same resultsregarding the importance of the windows of the buildings to ensure a highly energyefficient building, both when it comes to the windows size and their U-value..

Sigill Quality Systems has been certifying beef since the autumn of 2006 using the brand name label Swedish Sigill. IP Sigill (the certifying system for integrated production) encompasses the values: animal ethics, food safety, free range and environmental concerns. Product quality is not yet one of these values, and there is a variation in the quality of Swedish beef. Swedish Sigill wanted to investigate the factors that influence product quality, review which of the present regulations that have an influence on product quality and formulate new regulations with the purpose of enhancing the product quality (sensorial, technological and nutritional quality). A survey of quality parameters and factors that influence product quality was done in order to establish a scientific foundation to work from.