Six different Digital Proofing Systems from three different techniques have been evaluated as totechnique, printing quality, economy and usability. Digital proof from two paper qualities, coatedand uncoated, has been compared with references printed in offset, to see how good they match eachother. Only two Proofing Systems manage to print on reference paper. The other Proofing Systemsuse special paper for digital proof.Measurements and visuell judgement show that the Digital Proofing Systems visualise referencepictures with quite good quality. Proof optimised for coated paper visualise the colours with goodresult.

Good comfort for the driver of a construction machine is crucial. Gearshift comfort is an important part of the total comfort. Volvo Construction Equipment Components has a simulation environment of the powertrain, SimPow, which is implemented in Matlab/Simulink. SimPow is mostly used for simulation of control strategies and performance. In order to be able to study gearshifting comfort, Volvo has an interest in developing new models for SimPow.

This paper examines the structure of The Golden Notebook and in which way it reflects thethemes in the novel. This paper also describes the context of the 1960`s in which a certaintype of ideas were developing and wants to place The Golden Notebook in this context. Finallythe paper investigates what can be understood by reading the novel as a part of that context..

Being able to take a decision on an area you've never seen is a difficult task. It is also complicated to introduce an environment in the best way to benefit its purpose. This study focuses on the differences people notice between 2D and 3D models. To make it more concrete, the study has been linked to a case study called Ha?lsans va?g 255.

France is committed to its ambition to lift the European Union's arms embargo imposed on China after the Tiananmen Square Massacre in 1989. France is of today the only member state that is acting to lift the arms embargo, evoking questions of motives behind its behavior. The underlying assumption in this essay is that France's actions reflect a need to find new ways of adapting itself and surviving faced with the threats of its decreased international influence. By using three different perspectives ? realism, liberalism and constructivism ? this essay examines three possible models of analysis to explain France's behavior.An analysis of the discourse covering this essay´s topic between 1989-2007 provided the basis of the paper.

Citizenship and immigration policy are controversial aspects of the European integration project. Fourteen years ago Roger Brubaker stated that the vital differences between German and French citizenship policy were unthinkable to harmonise. This paper therefore seeks to investigate whether the old image of the two countries are accurate. By evaluating citizenship and immigration policies in today's context with the increasing influence of European Union policy I here present a more correct picture of the situation in both countries. Partly to see how the harmonisation has come this far.

This paper focuses on the employers? responsibility as described in the 11th section in the Employment (co-determination in the workplace) Act of 1976. The questions asked are to determine whether the law in the 11th section is followed in real life and if the consequences for breaking the law are a deciding factor. This paper summarizes the law as it is interpreted today and in what situations it is applicable. Since the law and especially section 11 affects certain individuals and organizations, the paper also describes who these individuals and organizations are and how they are affected.

Nowadays the majority of the thinnings made in Swedish forests are done by machines, harvesters and forwarders. The most common model in thinning with a harvester is strip-road operated thinning and stand-operated thinning with one intermediate passage between the strip-roads. This study is a time study with some quality follow ups on a strip-road operated thinning model, a stand-operated thinning model with one intermediate passage between the strip-roads and a stand-operated thinning model with two intermediate passages between the strip-roads. The machines in the study were a small harvester (Forestline MPM C90) and a medium sized forwarder (Timberjack 1110). The study was made in Litsnäset outside the city of Östersund in Sweden and was made during the autumn 2007. In a lodgepole pine stand six study units (0,6 ha) were thinned with the three different models, two study units per model.

The use and attention given to the certification system ?Miljöbyggnad? has increasedin recent years. The system is completely Swedish and was initiated in 2005 by theBygga-Bo-Dialogen. Miljöbyggnad aims to create a healthy indoor environment, reduceenergy consumption and discourage the use of hazardous chemical substances. Thegrades that can be obtained are Classified, Brons, Silver and finally Gold.The work has been to examine three different models and conclude how the designof the models affect the grades in the certification system Miljöbyggnad.

AbstractSAAB has for a long time used user controlled pilot models in ARES. ARES is a simulation tool used in the desktop environment for simulations and calculations of the JAS 39 Gripen fighter and other aircraft. ARES stands for ?Aircraft Rigid body Engineering Simulation?. To work with these pilot models has been both time-consuming and inefficient.

The aim of this work is to demonstrate how the net present value (NPV) at the time of the first thinning depends on the spacing after pre-commercial thinning, and show how net value from first thinning in same stand is influenced. This study is performed with models based on non-distant dependent growth models for single trees. Two different growth models have been used, one for cleaning (pre-commercial thinning) and one for thinning. The first one yields stem density distributed over diameter classes. In the second one, (the thinning model), it is possible to choose when thinning should be done, the thinning method, thinning grade and numbers of thinning.

Title: The Relationship between Internationalization and Firm Performance Seminar date: 5 June, 2008 Course: Masters thesis in Business Administration, Programme for Managing People, Knowledge and Change, 15 University Credit Points (15 ECTS). Authors: Cheng Hsun Chiang and Márton Pap Advisor: Dan Kärreman Key words: Internationalization, Performance, Multinationality, Degree of Internationalization (DOI), Country of Origin Purpose: To illuminate various crucial aspects of internationalization by systematically contrasting the different models of the multinationality-performance relationship and searching for underlying reasons. Methodology: Meta-analysis on previous theoretical and empirical research. Our emphasis in this paper has been put on the qualitative aspects of the previous research unlike many other conventional meta-analyses that focus on the comparison of the empirical data. Theoretical perspectives: Five main models have been developed by earlier studies to describe the relationship between internationalization and performance: positive linear, no or ambiguous relation, inverted U-shaped, standard U-shaped and S-shaped curve.

This paper examines the structure of The Golden Notebook and in which way it reflects thethemes in the novel. This paper also describes the context of the 1960`s in which a certaintype of ideas were developing and wants to place The Golden Notebook in this context. Finallythe paper investigates what can be understood by reading the novel as a part of that context..

Background: Of those who start companies, only about 30 % are women. Women's companies also often have both fewer employees and lower turnover. Several efforts are therefore being made to try to influence and encourage more women to start businesses and to get them to expand. Two of these ventures are special network for women and about women entrepreneurs as role models, something that also the theories believe is very important for a more egalitarian business. While entrepreneurship is encouraged for growth in the community, it also has a male character, something that needs to be considered.Purpose: As both the EU and the Swedish government through measures such as Tillväxtverket, is investing large sums to promote networking and role models, we intended to analyze the importance of networking and role models for entrepreneurial women.

Our paper is based on matrixes and the feedback process as tools in the daily work in the higher education system. The main purpose with this paper is to investigate if these tools can enhance the effect of formative assessment and increase students? empowerment in the courses. In do-ing so, we investigate if students experience that their efforts result in increased progression in their courses and if they acquire adequate proficiency in the subject matters native to their pro-grams, along with an increased desire for lifelong learning. Compulsory collection of data for profit is conducted through interviews of students in year one of the IT media program and the IT program.