Construction of an autonomous wind station was a project with the goal of creating a product that could collect wind data from a sensor and then transfer this data to a server wirelessly over the GSM network. The device would be powered by batteries and solar cells and function fully without requiring external power supply. This required that a small computer was constructed and programmed to store and send data at predetermined cycle times and programming of a server that received the sent data. The project also required optimization of power consumption and dimensioning of solar cells and batteries based on this. The construction of this station demanded research both for the selection of hardware and programming software. The computer was based on a microcontroller and a GSM module that sent the data over the 2G network.

Ecolean Development AB are developing and manufacturing filling machines for pasteurized liquid food products. Because of lack of any appropriate supplier of box closer which seals boxes with small flaps, they have decided to start a project to develop a prototype of a box closer. Due to long experience from industrial automation I have been given a chance to develop control system for a box closer. Degree thesis involves electric design in ELPROCAD ic PRO and programming of PLC (programmable logic controller) and HMI (Human Machine Interface). The report describes degree project from the project plan phase via the development phase to the conclusions.

The Sitting while waiting for sustainability project goal was to make a functional model for a resting chair and to make it by using furniture and artefacts as material. A try of understanding the process of re-design and to use it to design was driving the project through. The result was a prototype made out of a bed frame and 18 pair of jeans and with details made out of leather..

I vår produktion har vi tagit fram ett system för order- och lagerhantering, med vikt på realtidsuppdateringar, åt en extern mottagare där infrastrukturen inte hängt med i företagets utveckling. Vi valde detta projekt i syfte att bredda våra kunskaper inom både programmering och projekthantering. Denna slutreflektion tar upp den förundersökning vi gjorde för att kunna besluta om vilka verktyg vi använde i utvecklingen, den tar även upp vårt sätt att hantera och planera projektet. Under projektet har vi arbetat med en egenutformad arbetsprocess vilken även beskrivs här. --- Our production has been to design a system for ordering and supply management with emphasis on realtime updates to an external recipient, where the infrastructure has not kept pace with the development of the company.

Usability is a well-known term in system development. Today both consumers and organizations aim to increase usability. The purpose of the study is to gain knowledge about inexperienced users? interactions with websites and concretize that knowledge for future studies.Interviews have been conducted within two areas where experienced web developers with extensive programming knowledge brought know-how while inexperienced users without any programming knowledge have given their views. A number of existing tools for web publishing have been analyzed.

I vår produktion har vi tagit fram ett system för order- och lagerhantering, med vikt på realtidsuppdateringar, åt en extern mottagare där infrastrukturen inte hängt med i företagets utveckling. Vi valde detta projekt i syfte att bredda våra kunskaper inom både programmering och projekthantering. Denna slutreflektion tar upp den förundersökning vi gjorde för att kunna besluta om vilka verktyg vi använde i utvecklingen, den tar även upp vårt sätt att hantera och planera projektet. Under projektet har vi arbetat med en egenutformad arbetsprocess vilken även beskrivs här. --- Our production has been to design a system for ordering and supply management with emphasis on realtime updates to an external recipient, where the infrastructure has not kept pace with the development of the company. We chose this project in order to broaden our knowledge in both programming and project management. This text brings up the investigation we made to decide which tools to use in the development, it also brings up the way we managed and planned our project. During the project we have worked with a self-designed software development process which is also described here..

Dagens utveckling av mjukvara går snabbare och snabbare samtidigt som mjukvaran blir allt mer komplex. Att under dessa omständigheter kunna bibehålla en lika om inte högre kodkvalité är en utmaning. På UIQ bestämde de sig för att undersöka om ett automatiserat unit test kunde hjälpa dem. Metoderna för att komma fram till resultaten i denna rapport har varit intervjuer, en enkät, intern information och litteratur så som forskningsartiklar m.m. Denna rapport är en utredning av automatiserade test, vad man bör tänka på, vilka fördelarna är, vilka testfall som är möjliga att automatisera med mera.

This thesis is   focused on identifying and documenting all   electrical equipment, such as devices, power lines / cables, and connectors in the facility and also on presenting a brief   technical description and information of the systems around the reactors.   Furthermore there will be a brief description of LabVIEW - which is a   graphical programming language- and which devices / elements   are programmed. For further notification, I am not   responsible for the programming of the devices in LabVIEW   which I have only used as a tool in my work. The plant   for production of biogas consists of four reactors   of which the third reactor (Lakbädden)   is connected to another reactor (UASB)   where they cooperate with each other.   The reactors are used for producing   biogas in the form of methane gas.The reactors I and II are   connected to, various electrical devices as, flow meters, temperature   sensors, frequency converter and   more.

Dagens utveckling av mjukvara går snabbare och snabbare samtidigt som mjukvaran blir allt mer komplex. Att under dessa omständigheter kunna bibehålla en lika om inte högre kodkvalité är en utmaning. På UIQ bestämde de sig för att undersöka om ett automatiserat unit test kunde hjälpa dem. Metoderna för att komma fram till resultaten i denna rapport har varit intervjuer, en enkät, intern information och litteratur så som forskningsartiklar m.m. Denna rapport är en utredning av automatiserade test, vad man bör tänka på, vilka fördelarna är, vilka testfall som är möjliga att automatisera med mera. Rapporten kommer även att presentera grunderna i testning av mjukvara, en introduktion till eXtreme Programming och Test-Driven Development samt hur testningen utförs på UIQ idag. Då jag kom fram till att ett automatiserat unit test skulle passa sig bra på UIQ kommer jag i slutet av denna rapport presentera ett implementerings förslag. Man bör även införa en test driven utvecklings metodik för att säkerhetsställa att det kommer att utvecklas automatiserade testfall..

A project exploring the boundaries between 2D and 3D. What is surface and what is substance? A countinuation of previous projects where I?ve examined the journey from two dimensional paper to three dimensonal objects. This project deals with the journey from three dimensonality back into a flat two dimensional surface, and the question if something can be both 2D and 3D at the same time. I decided not to center the project around a specific item, but rather let the project itself be in focus.

Due to the technical development the enterprises of today are forced to creative thinking when it comes to marketing of their products. An example of one of these new methods are the development of product placement which has come to an interesting turn namely advertiser funded programming (AFP). Instead of the product just being a small part of the storyline it has become the story itself. The purpose of this study is to analyse how the advertiser funded tv-production Roomservice, a Swedish home styling program, communicates with it?s viewers as well as how they perceive the message.

In this paper you can read about students? opinion of teaching in mathematics. The study is done with eight students that were interviewed. The study is based on 16 questions about mathematic teaching. The questions covered student participation, how teachers should be, if they think mathematics is important, which approach to take in lessons and how student best learn.

The thesis has been carried out in cooperation with Master Flow AB, Västervik owned by the EWEBE Group. The company produces and sells hot runner systems that are tailor made for the customers.The problem that MasterFlow AB has encountered is in the construction of complex hot runner systems in SolidWorks. With several different lengths, fronts and endcaps that builds the nozzles of the hot runner systems, is affecting the problems for MasterFlow AB. The purpose of this work is to automate the design of hot runner systems so it does not overload the CAD-system SolidWorks.To gain an understanding of the problem, there have been several studies and observations at the company, where the focus has been on how the work is done with the design of hot runner systems. By using help from the corporate management, enough information has been collected to find a solution to these problems.The implementation of design automation has been based on a flowchart that was created.

In this literature review the cemetery is studied in its role as a public space in an urban context. To be able to scrutinize the cemetery?s relationship to the public domain in the future, the cemetery?s background and history is studied in the beginning of the essay. The cemetery?s connection to the church, as well as a variety of other factors such as economic, architecture, hygienic aspects and different ideals has influenced the cemetery to be the place it is today.

This degree thesis is based on an assignment from BEOMAT in Storfors. BEOMAT is a company that constructs and sellsclay pigeons to both the national and international market.Our main purpose with this paper is to find a solution/system that can replace the expensive and space demandingOlympic trap facility. Our solution will replace fifteen clay pigeon throwers with one automatic thrower whosimulate all throwers together. The system will be provided with an appropriate control system for mass productiontherefore this system needs to be user-friendly so no previous knowledge is required.Totally 405 different throw coordinates will be stored in the programme in nine different subprograms. According tothe Olympic-rules the throwers should coincidence within certain specified conditions, this will be solved with anrandomizer in the programme.