This paper is a thorough review of my internship, during which I designed infographics at Grafiskt Center, SVT, Stockholm. The purpose has been to find out what guidelines and policies SVT has regarding infographics while producing infographics in a professional environment. In addition, I present the daily routine at SVT and the tools used during the work process. Furthermore, the paper contains a reflection of my work effort during the internship as well as thoughts on how I adjusted to the guidelines in question. Finally, the essay treats some examples of infographics which I produced during my time at SVT..

The interest in small-scale electricity in Sweden has increased strongly in recent years. The interest is noticeable both among politicians to increase the share of renewables in the energy mix, and among electricity consumers to partially replace purchased electricity with self-produced. This has resulted in a significant increase of electricity production in low voltage grids in recent years, and the trend appears to continue in the coming years. The majority of the new production plants are solar cells, followed by wind turbines, and it is also in these the greatest efforts are made in this paper.Distributed generation is often seen as something positive since it will contribute to reduced transmission losses and reduced voltage drop in the networks, and that it increases the share of electricity from renewable sources. In cases where the grids are not strong enough, or in other ways not adapted to manage the installed production, power quality may be adversely affected.

Venous leg ulcers are a chronic disease mostly among elderly individuals. The leg ulcers are often painful and interfere with the individual?s daily life. The aim of this literature review was to describe individuals? experiences of living with venous leg ulcers.

This report contains CFD-simulations of cable tray fires in nuclear power plant applications with the CFD-code SMAFS. Furthermore the report evaluates the use of CFD-codes within this kind of problems. The assessment of this report is that there is a tendency towards the good use of CFD-codes but before using it solely more research has to be done on the subject..

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

Abstract          Background: End of life is difficult to establish in patients with dementia and many patients die due to complications related to the disease. To document that care are palliative in this group of patients is not common among nurses and physicians. This may depend on that the palliative course is extended and not similar to the palliative course common among patients with cancer. Aim: To describe how the registered staff in nursing homes document the care of persons with dementia in a late palliative phase. Method: A retrospective record study with a deductive approach.

The  construction  industry  is  a  costly  business  such  in  respect  of  capital  for  most construction defects which then require rework, tear down and rebuild again. This study is  meaningful  awareness  of  tools  that  can  reduce  this  best  through  communication  and information sharing between the parties.  The  construction  industry  is  known  as  temporary  projects  organizations,  where  the construction  project  consists  of  several  actors  who  have  to  communicate  and  share information  between  them  to  avoid  mistakes  later  in  the  build  time.  These  actors  are bounded together thus for the duration of the project, then broken when the project has reached its end. The challenge here is for these actors to apply a tool that can help and simplify communications, information sharing, and perhaps the most important aspect is to  create  a  routine  for  the  association  and  the  shattering  of  these  actors.  To  implement such  behavior  using  a  tool  such  as  BIM  in  the  industry  whose  size  perhaps  is indescribable may be a very hard task.  BIM (Building Information Model) could be seen as the solution to this problem because it  acts  as  a  portal  where  the  actors  involved  must  sign  in  and  communicate,  share information, and eventually create a behavior, a routine for this association and division of  the  actors  following  the  end  of  the  project.  The  technology  could  help  the  involved from  the  beginning  of  the  project,  already  in  the  model  stage,  break  down  and  prevent any construction barriers when the building has been placed in the works.

When the local authorities establish a plan for land use planning, they have to judge if the influence on the environment could be of such a grade that they have to make a special Environmental Impact Assessment (EIA), following national laws and EU-directives. The laws for the process in Sweden is set by the Swedish Parliament, with advisory given by the central government authority, the National Board of Housing, Building and Planning, Boverket. For EU, the laws is set by the European Parliament and the Council. The laws and directions for this process have been changed for Sweden in recent years, and the aim of this study was to compare the contents of three different Environmental Impact Assess¬ments to see if there has been any change in appearances and content in later years, as well as to see if different municipalities and authors have effect on the EIAs. According to different studies some of the EIA done are without insufficient focus on main environmental issues in the EIA, or even that some information is missing.

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

Background: Many authors consider knowledge to be a significant source for competitive advantage. Replicating companies found their competitiveness on an ability to leverage its knowledge base by replicating its business model in new contexts, a process often referred to as the McDonalds approach. Several authors emphasize that an efficient method for knowledge transfer may increase the risk for imitation. Purpose: The purpose of this study is to examine in an explorative manner how strategies for replicating complex knowledge systems are employed and developed. Furthermore, our ambition is to explore the notion of replication strategy.

Swedish authorities have been dealt a mission by the Swedish state, where each agency works on the basis of their assignment. Communication has become more and more important for authorities, there are several reasons for the use of communication and they may differ from authority to authority. Some authorities claim that the purpose of the communication work is to create awareness and recognition among citizens. A communication form that has become increasingly important for government agencies is social media, according to the government authorities should implement social media in their communication work because it is very important that the authorities are available where the citizens are. Previous research has focused on the risks and opportunities that the social media generates for the public sector.

Along with the rapid expansion of wind power in Sweden during the last decades the competition about favorable areas has hardened. This among other reasons has caused the projectors to look into development of wind power in forests. There are several aspects regarding fatigue loads on the constructions that are severe in complex terrain, among which turbulence is one. The levels of turbulence which are accepted in order for the turbines to face a life length exceeding 20 years are regulated by the International Electrotechnical Commission, (IEC). In order to keep the turbulence below these levels there are three major steering tools to use: The ambient turbulence decreases with height and can therefore be regulated by the hub height of the turbines.

The aim of this project has been to raise the production efficiency of Daliff Precision Engineering through reduced transportation time and a more standardized manufacturing process. The problem has upraised because of a big and diversified product flora without any standard products and with just small batches ordered. The report also tries to show the work procedure with general analytical methods and be an example of how a similar problem can be resolved. The transportation time is being proposed to be reduced through a change in the layout of the factory. By moving a few manual machines, dispatch and burring to more efficient locations, the total transportation time will be reduced by 55 %.

The past and ongoing structural change in Swedish agriculture has led to an increasing number of large-scale farms. The biological factors associated with large-scale farming operations may cause increasing variability, risk and reduced yields due to sub-optimal timing and management of field operations. The theory of economies of scale suggests that largescale production may benefit from lower costs due to scale efficiencies. Thus, large-scale farms may face cost reductions in terms of long term inputs factors, e.g. agricultural machinery.

The purpose of this thesis is to discuss how an instrument originally developed for measuring changes toward lean thinking inservice organizations in general should be adjusted in order to be of use in service organizations within the healthcare sector, andin hospital organizations in specific. The adjustments are suggested based on difficulties specifically arising when implementinglean within the healthcare sector.Thesis starting point is a pre-existing lean assessment instrument developed for service organizations in general. The thesis appliesa qualitative method and integrates literature from the health care sector and lean production movement with the expertise of tenacademics and practitioners in order to find difficulties associated with the implementation of lean within the healthcare sector.These difficulties then lie as the substratum for the adjustments suggested to be made on the instrument.The thesis finds that lean, as a philosophy, does not differ between service organizations in general and service organizationswithin healthcare settings. However, due to deficits in the general understanding of lean some adaptions on the instrument mustbe made. First, some words associated with production must be changed to words associated with healthcare.