70 % of the lakes and waters in the water district of northern Baltic Sea do not reach the requirements for good ecological status. This is mostly due to eutrophication caused by a too high deliverance of nutrients from agricultural land or effluents. Losses of particulate phosphorus through water erosion contribute to a great extent to this eutrophication. In the action plan for the water district cover crops are mentioned as a measure for reducing losses of phosphorus from arable land. This paper reviews the possible effect of cover crops in the water district and discusses what crop that would be most suitable.

SAPA´s resource of waste heat is the basis for this thesis to investigate the possibility of energy assets in their cooling water and possible uses for it. The energy in the waste water is greater than the current need which has three uses which are (1) heating the factory, (2) converting liquid propane to propane gas and (3) local domestic heating. The average energy load that is available is 1, 7 MW and the average temperature in the cooling water is 41°C. The total energy load at dimensioning out side temperature is approximately 1,6 MW for the three current uses. The temperature is currently too low to be used directly in the existing systems so an upgrade is needed.

In the West, travels are often regarded as a given. When tourism is studied it sometimes sounds as if all people have the opportunity to go on vacation when they want and wherever they want. That is not the reality for all. There are laws and regulations on visa requirement which makes it harder for nationals of certain countries to travel on holiday abroad. This essay examines the situation for residents of countries outside the EU and the Schengen Agreement.

A degree project has been carried out at Motion Control, Västerås. The degreeproject ?Grafisk Skärm för Inbyggda System? have developed a first prototype of anembedded system with a display, a graphical user interface with touchscreen andpossibilities to communicate with external units.The work initiated with surveys of critical components. A technical specification forthe desired end product was developed. With the technical specification as support,design specifications for hardware and firmware were developed.After the specifications were done, a circuit diagram was developed and a circuitboard was made.

The aim of this study was to explore how six men who run a micro-enterprisewith a maximum of 10 employees handle the balance between work and otherlife. Qualitative approach with semi-structured interviews was conducted and thesample consisted of six men with micro-enterprises of varying ages. The themesused in the interviews were boundless work, roles, boundaries strategies anddemand / control - social support. The results showed that micro- entrepreneursdo not experience any major imbalance between work and other life. The studyrevealed that the division of roles in the home of the elderly respondents was ofthe classical gender character that woman took great responsibility in the home.Among the younger respondents the unpaid work at home was equal divided.Social support was perceived highly by all respondents, and they alsoexperienced a high level of control over the requirements of the job.

This document is a summary of my work to create a project management system for a small firm working with computer graphics. The intention is to manage customers, projects, images and invoices in the easiest possible way. To make the system as flexible as possible a web-interface was chosen which makes it possible to access the system from any computer, making it independent of any particular operating system. The only requirement on the user environment is that the computer must have a connection to the Internet to be able to access the system. The different techniques that have been used to develop the project management system is primarily Ruby on Rails and a MySQL database.

This report summarizes a Bachelor Degree Project in Integrated Product Development,carried out during the spring semester in 2007 by three students at the Product Design Engineering programme at the University of Skövde. The project was performed as an assignment for KinBag ab, a sister subsidiary to Kinnegrip ab in Lidköping, who develop,manufacture and market the golf bag KinBag, a bag with an integrated wheel carriage system. The purpose of the project was to redesign the golf bag to attract a target group consisting of golfers aged between 20 and 40.The layout of the project was as follows: The project began with a feasibility study where different problems were identified with the basis of a market research which eventually was summarized in a dynamic specification of requirements. The feasibility study was followed by a generation of ideas which contained everything from sketches to simple mock-ups with an intensive amount of thoughtful brainwork and information gathering in between. This ledto the development of a number of design concepts, both on an overall level and on different parts of the golf bag.

sustainable development by reducing the energy use by EU:s directive of energy efficiency and the UN Convention. The second purpose is to present the technical solutions regarding ventilation and heating system that is being used in passive houses. This was done using 8 passive houses, 4 germany and 4 swedish passive houses. Even the international and Swedish system requirements for passive houses have been addressed in this project. The goal was also to explain how and why the mechanical system in passive houses has developed to the technology used today.

The purpose of my task was to map the pallet flows at Findus and put together as well as analyze the problems. My work has also included finding out what alternatives there are to the present pallet exchange system and suggest measures to reduce the problems.The problems can be divided into poor quality and hygiene issues. The poor quality, for instance poor strength is due to arbitrary judgements and the fact that there are companies that make a system of manufacturing forged pallets of an inferior quality compared to the EUR-pallets. These pallets are marked with stamps more or less similar to the EUR-mark and taken into the exchange system. Of course there are rules how to judge a pallet but these rules are many and sometimes indistinct and there are a lot of marks to keep track of.The most dangerous part is when the pallets lack the prescribed carrying capacity.

Arbetsuppgifterna på ett fartyg kan innefatta hård fysisk påfrestning samt arbete i mörker, påhög höjd och i slutna utrymmen vilket betyder att sjöfolk måste vara lämpliga för tjänstgöringen.De nationella reglerna för medicinsk lämplighet för sjöfolk skiljer sig trots att deninternationella standarden är densamma för alla. Syftet med denna rapport är att åskådliggöraskillnaderna mellan regelverken om läkarintyg för sjöfolk i de skandinaviska länderna ochundersöka historien bakom de svenska föreskrifterna.Vår slutsats är att det skulle gagna Sverige att återinföra Sjömansläkare, som troligtvis är merkompetenta än en icke specialiserad läkare vad gäller tjänstbarhetsbedömning för sjömän.Systemet med sjömansläkare är fortfarande i bruk och fungerar väl i både Danmark ochNorge.Slutligen sammanfattas rapporten av författarnas egna reflektioner kring ämnet i relation tillresultatet. Förslag till vidare forskning återfinns i slutet..

We all know that water is very important for both animals and humans. When we are weaning the piglets from the sow we must guarantee that the piglets can start to drink more water instead of sow milk. The first thing to check is always the quality of the water that is to be used. To secure that, you must take a water sample. If the water is inadequate it can bring a lot of problems and diseases.

The objective of this work was to introduce measures to reduce energy and water demand at Gävle Söder 17:10. To succeed, this energy audit has been made. The work is based on collected statistics from the property owner Norrporten, measurements, literature review and through consultation with experts in the field. Two models, one for each building, have been created in the simulation program BV2 to estimate the potential of energy measures based on the collected information. The models in BV2 have been verified against the statistics of the energy consumption.With the help of calculations and simulations, seven cost-effective measures have been identified.

The increased specialisation and complexity in products and services has created the need for Swedish companies to focus more on their core businesses. This has resulted in them opting to buy services and products that lie outside of their core business from consultancy businesses or other types of suppliers. When companies describe their offers in internal and external marketing it is done often in terms of company or service attributes that are not based on customer value or offered value for the customer. The reason for this is that companies have not adapted their services to the different needs of their customers. As a result of this, they run the risk of offering the same services as their competitors and communicate values that the customers either do not understand or experience as value adding. By using the theory on the data collection from the case company we have an understanding and shown how the customer values can be developed from a service company?s internal and external prerequisites and competitive advantages.

During the study's first stage we noticed that the Swedish term ? utanförskap? was constructed for political purposes, the term?s ambiguity what was first raised our interest. Therefore the aims of this study was to examine how social workers at the social welfare office and the labor market related project Framtid Kronoberg  as well as politicians within the administration of Arbete & Välfärd (Work & Welfare) relates to utanförskap as a social phenomenon. The study?s second aim was to examine how the aforementioned persons consider utanförskap to be counteracted among young adults.

The number of sawmills in Sweden has decreased dramatically since the 1980s and the trend looks set to continue. The sawmills that are left instead becomes larger and are situated farther apart. In northern Sweden, they are concentrated along the coastline.In our study, we compared conditions for running a sawmill in inland areas and coastal areas and looked at what factors have the greatest impact on the profitability of the sawmill in northern Sweden.We chose to compare different locals conditions for a sawmill that only sawn pine timber and had an annual raw material requirements of 300 000 m3ub per year. By analyzing the kNN-data from the Swedish National Forest Inventory we have taken out the size of the timber volume at each site and its catchment. We have also looked at possible competitors in the areas that may affect the purchase price of the commodity.