Aim: Banks? settlement of handling cash and the technological developments of our payment services, leaves us guessing at the outlooks of consumers? payment systems. One of the new payment options arising from this development is mobile payment. With access to internet, mobile payment can take over the role as the primary method of payment, as it can be used on any occasion. Questions are raised about which factors that are affecting the future users? attitude to use mobile payment, and if the service can be a threat to the traditional card payments.Method: This study is based on a quantitative method by the means of a survey design.

There is an irregularity in the interregional migration in Sweden. An increasing proportion ofthe population is drawn to the metropolitan areas, which creates problems for the smallermunicipalities and towns when their population declines. At the same time, our whole societyis faced with a great challenge: we need to redirect towards a sustainable development, wherethe environmental issues are discussed and dealt with to secure that all present and futuregenerations are given equal opportunities to live a good life.The aim of this study is to, focusing mainly on the environmental dimension of thesustainability concept, examine the attractivity of housing with sustainability claims. Toanswer this, three research questions were used:? Was the migration motive to reduce their environmental impact a part of the decision tomove, among migrants who had moved to housing with sustainability claims?? If the motive was a part of the decision, how much impact did it have compared to othermigration motives?? Which factors in housing aiming at sustainability are considered important by peopleliving in housing with sustainability claims?The research questions have been answered using quantitative data, gained in the form of selfadministeredquestionnaires which were distributed in four different residential areas withsustainability claims in the county of Västra Götaland, Sweden.

This study is commissioned by the Swedish University of Agricultural Science (SLU - Department of Forest Resource Management) in coorporation with Sveaskog and Vilhelmina Norra Sami reindeer herding community. The purpose of this study is to analyse movement patterns and habitat use of reindeers during two winter seasons (2005/2006 and 2006/2007) in areas affected by forestry activities such as clearcutting. This study examines the possibilities of analysing information from Reindeer husbandry plans and forest variable data from kNN and SMD, in relation to GPS collar points from reindeers by using Geographical Information System (GIS). Lack of knowledge and understanding between the reindeer industry and the timber industry has often led to heated debates. The possibilities of using this type of technique are very interesting and could increase knowledge concerning land-use issues to different resource users. The main results from analyses comparing SMD, kNN, data about clearcuts, and GPS collar points from reindeers indicates that clearcut areas, younger forest, coniferous forest on lichen-dominated areas and areas dominated by pine was preferred by reindeers during the winter period.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

There are around 855 000 on-site sewage systems in Sweden and some 1 800 of these are located in the municipality of Sigtuna. The Sigtuna local authority has set the goal that all sewage systems with insufficient function should be improved before the end of year 2010. A malfunctioning on-site sewage system may cause three main problems: spreading of diseases, discharge of eutrophicating compounds and wastage of resources. The municipality strives to reduce these problems already at the stage of granting permits for installation of on site sanitation systems. The municipality has recently adopted new guidelines, which demands certain minimum reductions for different compounds. The guidelines also state that it is preferred that neighboring house-owners cooperate in jointly built and operated sewage systems and that the system should be able to recycle plant nutrients.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Bakgrund Tidigare studier belyser vikten av att företag integrerar marknadsfunktionen och logistikfunktionen, detta då en sådan integration leder till fördelar för företag. När funktionerna är integrerade kan företag bland annat möta kunders förväntningar vad gäller produkttillgänglighet och leveransservice på ett mer effektivt sätt än om funktionerna inte är integrerade. I dagsläget finns endast begränsade studier om hur integration mellan marknadsfunktioner och logistikfunktioner ser ut i praktiken. En empirisk kunskapslucka vad gäller integration mellan marknadsfunktioner och logistikfunktioner i svenska detaljhandelsföretag kunde således påvisas och det är dennakunskapslucka som legat till grund för denna studie.Syfte Denna studie syftar till att analysera om, och i så fall hur, marknadsfunktioner och logistikfunktioner inom svenska detaljhandelsföretag är integrerade.Genomförande För att uppnå syftet genomfördes intervjuer med medarbetare på marknadsfunktionen och logistikfunktionen inom tre svenska detaljhandelsföretag. Dessa företag var Cervera, Glitter och KappAhl.

This thesis project focuses on the need for better tools for analyzing competition for forest fuels in Sweden, in particular how policy measures may influence the market and involved actors in different regions of Sweden. Raw materials from the forest have for long constituted important inputs in the Swedish forest industry. Today some of these raw materials are increasingly used as inputs also in bioenergy production, largely driven by bioenergy promoting policies, and there are signs of increased competition for forest fuels which may have various and uncertain effects on the industries in question. The thesis project explores the possibilities to adapt previously used forest sector equilibrium models into a new model suitable for analysis of Swedish forest fuel markets, called the Swedish Forest Sector Trade Model (SFSTM). The approach takes into account regional differences in supply and demand for 23 types of products produced and/or used by eight types of producers, plus consumers, in five different regions (four Swedish and one international).

A common experience is that leadership could be better handled during reorganizations within the social services. The purpose of this study is to examine how social welfare secretaries experience their managers during reorganizations. How do social welfare secretaries experience the manger?s role and actions? While developing the interview questions it became relevant to illustrate further aspects: To describe how social welfare secretaries experience the reorganizations that they have gone through and their experience of the everyday leadership around the managers?; openness, availability, clarity, trust and skills regarding managing stress among their staff. The study is built on qualitative interviews with six social welfare secretaries within units working with economical social assistance in different districts in the city of Gothenburg.

Sweden has long had access to low electricity prices due to the wide availability of hydro and nuclear power. This has now changed because of today's rising electricity rates resulting in increasing heating costs for properties, especially in the properties with electric heating systems."Ankaret" is a parish for "Svenska Alliansmissionen", which is located at "Gullbrannagården".The parish has installed electrical radiators and an exhaust ventilation system that makes the energy demand high due to the large ventilation flows. The building was built as the price of electricity was still low and would reduce energy use today by combining its heating system with an air/air heat pump. The heat pump delivers more heat into the room than the electrical energy that it uses. This lowers the electricity needs.

Inlastningen till ljusbågsugnen sker genom att flera skrotsorter blandas i en korg efter specifika recept för varje charge. Skrotsorterna innehåller många olika typer av skrot med liknande sammansättningar och även oxidiska ämnen. Till varje charge räknar en modell ut mängder av kisel, kalk, dolomit och kol som ska tillsättas för att smältan ska ha rätt sammansättning när den går vidare till AOD-konvertern (Argon Oxygen Decarburization). Under nedsmältningen i ljusbågsugnen blåses även kol och syrgas in för att skapa en skummande slagg som skyddar ugnsväggarna. Variationerna i processen är stora och det är svårt att förutsäga hur smältan kommer att bli.

This study has been carried out as a part of the EC funded project, SMARTDOC IST-2000-28137, with the objective of developing application components that provide highly interactive visualization and collaboration functionalities. The low-level components from the graphics library AVS OpenViz 2.0 are used as the development basis. The application components can be inserted into electronic documents that allow embedded controls such as web documents or Microsoft Word or PowerPoint documents. Instead of displaying results as static images, a SMARTDOC component provides the ability to visualize data and interact with it inside the document. Although the principal goal of the SMARTDOC project is to create components in a number of different application domains this study concentrates on developing a medical imaging application component in collaboration with the project partners AETmed and professor Alan Jackson at the University of Manchester.

The rainforests of the world are important not only to the countries in which they grow but to the world as a whole. They influence oxygen and water circulation as well as carbon sequestration which in turn affect global radiation and global warming. The forest also have great value and in Malaysia as in many other tropical countries large volumes are harvested which leaves great areas of degraded forest with little growth and biological diversity. Due to their low financial value these forests are often transformed and used for other purposes than forestry such as oil palm plantations. The trees are often transported out of the forest using large bulldozers. They are heavy which causes compaction of the forest floor and during transport the top soil layers are moved to improve mobility.