Inom Försvarsmakten används motordrivna generatorer för att förse många förbandsenheter med elektricitet. Dagens bullriga och vibrerande elverk är idag möjliga att ersätta med tystare bränsleceller. På köpet erhålls en bättre ergonomi för alla som arbetar i hytter som strömförsörjs av elverk. I rapporten redovisas funktionen för olika typer av bränsleceller, vilka bränslen de använder sig av och hur dessa kan transporteras. Dessutom redovisas hur två elverk används och vilka förbättringar som kan åstadkommas vid byte till bränsleceller.

This thesis project focuses on the need for better tools for analyzing competition for forest fuels in Sweden, in particular how policy measures may influence the market and involved actors in different regions of Sweden. Raw materials from the forest have for long constituted important inputs in the Swedish forest industry. Today some of these raw materials are increasingly used as inputs also in bioenergy production, largely driven by bioenergy promoting policies, and there are signs of increased competition for forest fuels which may have various and uncertain effects on the industries in question. The thesis project explores the possibilities to adapt previously used forest sector equilibrium models into a new model suitable for analysis of Swedish forest fuel markets, called the Swedish Forest Sector Trade Model (SFSTM). The approach takes into account regional differences in supply and demand for 23 types of products produced and/or used by eight types of producers, plus consumers, in five different regions (four Swedish and one international).

The demand for renewable energy is increasing in Sweden. This consequently increases the pressure for and willingness to pay for forest fuels. One method to extract forest fuel from suitable commercial thinnings is the "long top method? (LT-method). With this method saw logs and non-delimbed tops are recovered, i.e.

This thesis investigates the socio- and environmental economic effects of a deep repository for spent nuclear fuel in Forsmark in the municipality of Östhammar. I seek to show the general picture but focus on the effects on employment, environment and income. Cost-benefit analysis is used to investigate the differences in utility between a scenario with and a scenario without a deep repository in Forsmark. Most of the possible effects can not be valued and many can not even be quantified with the data available today. Therefore this thesis has a bit of a ?preliminary study character? and seeks to show what we know today and what needs to be further investigated when available data allow it. The costs that could be valued are noise from the traffic during the period of building and emissions of carbon dioxide and nitrogen oxides from the transportation of rock masses during the building period.

This thesis is made by Carl Persson and Alejandro Saavedra for Gryaab. Gryaab is Gothenburg?s water processing plant and produces about 60 GWh biogas annually with a flow around 1150 Nm3/h. Gryaab wants to research their possibilities to become independent with electrical energy and the possibilities to enrich, upgrade biogas. The use of methane rich gases like biogas and natural gas is today low in Sweden compared to major parts of the world.

Diesel electric propulsion is in many ways a good alternative to conventional shaft propulsion, both economically and environmentally. There are also many other good side effects which need to be considered, i.e. better manoeuvrability, more efficient use of space and less noise on board. However, there are applications where diesel electric propulsion is not profitable. Large ocean going ships? profitability is much depending on fuel costs and the diesel electric alternative cannot compete on long journeys with large low speed engines.This thesis will treat the aspects of choosing between a diesel electric system and a classic mechanical propulsion system.

Until 2020, 49% of Sweden's use of energy must derive from renewable sources. Greenhouse gases must as well decline with 40% compared to 1990 as a part of Sweden's 16 environmental objectives. Biogas is part of the effort to achieve these objectives, but as the demand for biogas increases, more substrates are needed to meet the demand. The purpose is to investigate the conditions for pea residue as substrate by performing lab-scale mesophilic digestion with different fractions and notch lengths and then to summarize pea residue as a substrate for biogas production. During anaerobic digestion, 1000 ml bottles were used as reactors for digestion.

The Swedish road transport sector relies almost completely on fossil fuels. In 2007, as much as 96 percent of the total sales of fuels was made up of petrol and diesel, while at the same time the share of total emissions of greenhouse gases in Sweden that came from road transports amounted to close to 30 per cent. Sweden is by no means worse off than any other European country in these respects. In order to address the questions of high oil dependence and CO2 emissions the European Commission has proposed a reinforcement of the legislative framework, with a 10 percent minimum for the market share of biofuels in 2020. Furthermore, the proposed target is binding for the member states, unlike the current voluntary target of 5.75 percent by 2010. More than doubling the usage of biofuels in only a bit more than a decade will most likely not be possible without policy interventions.

Fuel wood is currently the third largest assortment from the forest in Sweden after pulpwood and lumber. Branches and tops i.e. logging residues are one of the assortments of fuel wood which is a common by-product after harvesting nowadays. The way to utilize, disintegrate and transport the logging residues varies between northern and southern Sweden. Branches and tops are collected throughout the year at appropriate stands, but are consumed mainly wintertime.

This master thesis encompasses an inventory of the older industrial community of Gimo. Investigations of the contamination situation for each industrial area were done. A risk classification according to the Swedish Environmental Protection Agency?s ?Method of Surveying Contaminated Sites?, phase one, followed. The risk classification was done on areas of Iron Work, a rockwool industry and a landfill. Gimo have had iron manufacturing from 1615 until 1945. Gimo have had two blast-furnaces and two smithies periodically.

As trucks are getting more and more advanced, information about their weight has become a key factor for controlling them in a more fuel efficient and safe manner. Knowing the mass of a heavy duty vehicle in real time has been a difficult challenge for the truck manufacturers. With the processing power for electronic control units in trucks steadily increasing, more advanced algorithms for calculating the mass has been developed, but at the moment there still is a wish for better performance.Since there is a lack of good information regarding the external forces acting on the vehicle, forces that depends on the slope of the road, foundation of the road and the wind, the methods have to be able to disregard these. Such an approach, based on an indirect least square solution, has been evaluated in this thesis. The results have been promising and based on these a recommendation about further evaluation has been made..

The running of gas turbines with low emissions causes high pressure pulsations to arise in the combustion chamber. These pulsations are high amplitude sound vibrations. At some frequencies these are harmful to the gas turbine. Hence these pulsations are monitored to avoid operating conditions where pulsations are specifically harmful. It is necessary to expose the system of known pulsations to verify the functionality of the monitoring process.

Namibia, southern Africa, suffers from an energy shortage and is therefore facing severalchallenging problems. The use of firewood as fuel for cooking is common in the whole countryand has negative consequences for health and the environment. This work have focused ondeveloping a solar baking oven, calledSunbaker, adapted for Namibian families needs forbaking. The development was based on classic solar cooking limitations, specific needs forNamibia and to have a feasible manufacturability.The project started with a theoretical study in Sweden where different solar cookers, informationregarding Namibia, technical aspects and end user aspects were studied. To assess the need for asolar baking oven aMinor Field Study took place in Namibia during eight weeks in July toSeptember 2009 and resulted in a product design specification.

Cremated remains have long been regarded as a highly complex material that often provides unsatisfactory results. This essay discusses the problems that arise when methods commonly used on unburned bone material are used in a cremated skeletal material. The present essay discusses the results from osteological analysis of seven cremations from Pre-Roman Iron Age from a large cemetery in Alvastra, Smörkullen. Several methods were ultimately not applied in the present study as they were insufficient for application on the relevant material. Since the methods were inapplicable and fragments available for gender assessments too low, no sex assessments were made.

Using the Introductory Carbon Balance Model, ICBM, five different crop rotations with rye 1. Rye-Ley-Ley-Rye-Beans-Rye 2. Rye-Rye-Rapeseed-Rapeseed 3. Rye-Ley-Ley-Rye-Potatoes-Rye 4. Rye-Rye-Potatoes-Wheat 5. Rye-Rye-Potatoes-Beans-Wheat-Rye-Potatoes-Rapeseed were tested theoretically in four different cultivation scenarios ? Straw left on the field, biogas digestate added as fertilizer. Labelled ?+straw+BD?. ? Straw left on the field, only synthetic fertilizer. Labelled ?+straw-BD?. ? Straw harvested, biogas digestate added as fertilizer.