Sök:

Sökresultat:

1710 Uppsatser om Overhead Cost - Sida 45 av 114

Omloppstid för returenheter

Cycle time has a direct influence on number of returnable crates needed and therefore a crucial parameter for cost structure and pricing of the user fec in the pool system.For providing the growing market, number of crates has to increase as well as the utilization of existing crates. To accomplish this aim, cycle time for the whole supply chain has to be fully unravelled and understand.The purpose is to map cycle time and stock movements, to see how, where and when crates are being used in the supply chain. The goal is to make a method of cycle time calculation, together with suggestions of improving the pool system and decrease cycle time.The study has been a combination of qualitative and quantitative research and comprises the three biggest wholesalers in Sweden; ICA, Coop and Axfood. Furthermore have 65 grocery shops, connected to the wholesalers, been investigated and mapped.The study has come to a conclusion that cycle time for an average returnable crate is 19 days. The full-size and half-size crates have a bit longer cycle time, 21-22 days, while Dual Height-crates and shallow haif-size crates have 17-18 days.

Integrering av kommunikation i ingenjörsutbildningar : Ett underlag för kompetensutveckling för universitetslärare vid KTH

The sun is an endless energy source and the heat it produces can be used to heatup our homes. This technology is relatively old and was introduced in the late70-s. There are two kinds of solar collectors that are most frequently used todayand these are plain solar collectors and vacuum solar collectors. The plain solarcollectors are the once that are used the most but the vacuum solar collectorshave increased more as a percentage the last couple of years.The biggest question asked regarding an investment in solar heating is if theplant is economically profitable. This question has no direct answer because itis dependent on a couple of prerequisites.

Kalkylutveckling i tillverkningsindustrin : -En Fallstudie hos HordaGruppen AB

Examensarbete i Ekonomistyrning, 30hp, Ekonomihögskolan vid LinnéuniversitetetTitel: Kalkylutveckling i tillverkningsindustrin ? en fallstudie hos HordaGruppen ABUnder 1980-talet uppmärksammades kalkylmodellens roll som ekonomiskt styrverktyg. Denna uppmärksamhet ledde till omfattande studier av hur kalkylmodeller kunde utvecklas för att lättare klara av förändringar i företags inre och yttre förutsättningar. Kalkylmodellers utformning påverkas av ett stort antal faktorer som t.ex. strategi, kontext och användning.

Fejans vandrarhem ? En studie om isolering och uppvärmningsalternativ

During the last decennium climate issues have become more and more important. Many steps towards an adaption of efficient energy supply systems have been taken all around the world. These steps have been created to ensure the next generation?s energy demand. In EU and Sweden objectives have been set to ensure that the energy consumption decreases by 20% year 2020 and by 50% year 2050 compared with the energy consumption levels of year 1995.

Vinterträdgårdar ur ett byggperspektiv : En undersökning om byggandet av vinterträdgårdar

The purpose of this of this essay is to explore the construction of a conservatory that is livable allyear around. When you build a conservatory there are several factors that need to be regardedthat usually are of no importance when you build a regular conservatory. The glassed facadeneeds to have a very good U-value and all the parts of the facade need to be isolated and theconstruction needs to prevent thermal bridges.In this essay we will start by looking at the shape of the conservatory. Due to the façade consistsof glass the conservatory will need to have a good ratio between the area and the façade so thatthe heat losses will be at a minimum. However, due to the fact that one of the sides of the façadeis connected to the warm house, you quickly realize that the shape of the conservatory is of noimportance.There are two common ways to build a foundation for a conservatory, a molded concretefoundation and isolated wooden beams.

Risk Management for commodity consumers -A study of the Airline industry-

The aim of this study is two folded. We wish to investigate if there is a value premium from hedging jet fuel exposure for American and European airlines. We also seek to answer if airlines can affect their probability to default by using Risk Management. During the period 2003 ? 2006 there existed a value premium for airlines that hedged their expected future consumption of jet fuel.

Hur hanterar institutioner en miljö med blandade Operativsystem?

The purpose of this thesis is to investigate if there are environments that use some kind of central authentication system within institutions/schools. The hypothesis is that an institution not using a form of central authentication service has more need for maintenance and as such is considered a higher cost for the organization. The gathering of data has been done through interviews with technical personal at Blekinge Tekniska Högskola and Linköpings Universitet. Based on the technical background of the authors, and the system limited to discussing Windows and UNIX operating systems, a discussion and analysis of the systems working today has been done, with emphasize on the hypothesis..

Utredning av solenergi för drivning av sorptiv kylprocess för inomhusluften på Stockholmsarenan

Cooling down the indoor air can be done in several ways. One way is desiccantcooling which will be used at the Stockholm Arena. This method is used in airhandling units that use temperature changes and moisture fluctuations in the air. Oneof the steps is to add heat during the cooling process in order to reduce the relativehumidity of the exhaust air. The air passes thru an adsorptions rotor which thenabsorbs moisture from the supply air.

Portning och utökning av processor för ASIC och FPGA

In this master thesis, the possibilities of customizing a low-cost microprocessor with the purpose of replacing an existing microprocessor solution are investigated. A brief survey of suitable processors is carried out wherein a replacement is chosen. The replacement processor is then analyzed and extended with accelerators in order to match set requirements.The result is a port of the processor Lattice Mico32 for the FPGA curcuit Xilinx Virtex-5 which replaces an earlier solution using Xilinx MicroBlaze. To reach the set requirements, accelerators for floating point arithmetics and FIR filtering have been developed. The toolchain for the processor has been modified to support the addition of accelerated floating point arithmetics.A final evaluation of the presented solution shows that it fulfills the set requirements and constitutes a functional replacement for the previous solution..

Assessment of food retail business sustainability : the case of Konsum Värmland

Public concern and the need of responsible way of doing business have brought forward the issue of sustainability at the forefront of discussion in the last decade. Even though, food retailers are playing an important role in the economy, they are exposed for criticism by media and consumers for any socially and environmentally irresponsible business practices because, the potential environmental and social impacts from their operations are significant. These impacts need to be recognized and properly addressed. The main objective of this study was to assess the sustainable business management of a cooperative food retail business in Sweden, known as Konsum Värmland (KV). The necessary data and information on history and status of KV, and its practical activities concerning the implementation of sustainable development programs as well as the motivation and challenges encountered by KV during the implementation were gathered via reviewing different documents, research papers and press releases; interviewing decision makers and other personnel in KV and other researchers from Swedish University of Agricultural University who have investigated KV.

Ö?kad tillga?nglighet mo?jliggo?r kvarboende : -En analys av tillgänglighetsrenoveringar

The number of elderly in Sweden is increasing due to improved living conditions and better medical care. It is important that society adapts to the increase and begins to work preventively to reduce the costs of the increase. An important aspect is the elderly accommodation, the cost of health care in specific accommodation is almost twice as high as those for ordinary housing. Therefore, it is important that we availability adapt dwelling to allow older people to live in ordinary housing for as long as they wish, instead of moving to assisted living before they need it. If we can fulfil the elder?s needs with home care instead, society can save a lot of money.In this report, three different forms of housing has undergone accessibility increases and been inventoried and analysed.

Lågkonjunkturens påverkan på den svenska konsumentmarknadsföringen

The purpose of this essay is to analyze and understand the effects that a recession can have on a company?s marketing department. In times of a recession most companies have less means to promote their products to their target market and to build their brand. This means that cutting the marketing budget will show some effects on today?s way of marketing.

Förstudie för automatisering av manuell lödning

This degree project has been carried out in cooperation with Enertech AB in Ljungby and is pilot study to automating all current manual soldering. The soldering process accounts for a large part of the processing cost in the production of a heat pump. The process is also a quality risk and has a major impact on the lifetime of the final product.The Main task of this project has been to evaluate automation of the soldering process, to develop automation solutions and a principle layout, to draw the design changes required for the automation and to calculate the supposed solution.This pilot study has resulted in a suggested automation solution using laser as a heat source for soldering. Calculations of the solution show that a automating a laser soldering cell is very profitable..

Sjukfrånvaro - ett kostsamt problem

The purpose of this essay is to identify the costs of illness in different organizations, and compare the calculated result with the actual result in their annual reports.We collected information thru interviews with the personnel manager in the selected organizations, and used the annual reports to add necessary information.When we applied our model, we found that the selected organizations, in some cases, have a cost of illnes which is up to seven times higher than shown in their annual reports. It?s, in general, the costs that aren?t related to the salary (additional costs), which are much higher than shown.The absence of a model that calculates the costs of illnes can result in wrongful decisions. If a model would be applied in an organization, it should increase the awearness of the actual costs of illnes, which can lead to better decisions througout the whole organization.This report is written in Swedish..

Hållbara transporter : Överföring från väg till järnväg

Road transports stand for a great part of Sweden?s total CO2-emissions. Transports are expected to increase over the coming years, and with those the emissions. A greater environmental awareness leads to increased demands for environmentally friendly transport. The aim of this thesis is to study the consequences of changing transportation modes from road to railway.

<- Föregående sida 45 Nästa sida ->