Many interactive products constructed today is not produced towards a specific targetaudience and how they will interact with the product. This master's thesis follows the designprocess in the development of the Let's Walk webapplication. In the designprocess has users of the webapplikation been identified, prototypes developed and an interactive version has been evaluated. The Let's Walk webapplication is a fully working system used to administrate Let's Walk, an exercise competition between companies. Experts and users have been involved to evaluate the Let's walk high-fidelity webapplication prototype.

This study was done regarding whether sealing or ventilation is the best solution to prevent moisture on cold attics. The authors of this report addressed the problem with moisture in attics when they started their cooperation with Peab.The methods included interviews with people, database research, and calculations of a project in Akersberga north of Stockholm. The conclusion is based on interviews and other information as they are analyzed in relation to the house of reference. The focus of this report is on problems with moisture in the attics known as cold attics.The background of the problem with moisture is that today?s slabs are usually insulated to save energy and that the attics nearly gives the climate as the outdoor climate.

Den här rapporten redogör för utveckling, design och sömnadskonstruktion för en sadelpadd. Rapportens ämne valdes för att jag fann det intressant och har själv stort intresse för hästar och produktutveckling. Fokus på rapporten låg på att ta fram en fungerade prototyp som testades av hästägare för att se om en distansväv skulle klara av att vara det stötdämpande och tryckutjämnande materialet i en sadelpadd. Rapporten och utvecklingen av rapporten bygger på en enkätundersökning och några intervjuer med relevanta personer insatta i ämnena sadelpadd och ryggskador hos hästar. Utifrån den insamlade informationen från de intervjuade och de som svarade på enkäten samt tidgare skrivna källor gjordes en studie i hästars uppkomst av ryggbesvär.

This degree project has been performed on commission by Örsjöbelysning AB. The task has been to study alighting armature and compare it to the demands of The Swan Ecolabel. The task was also to recommend adjustments to improve the environmental adaption of the product to meet the demands of The Swan Ecolabel. Furthermore the task has been to gather documentation on the elements of the lighting armature. Such documentation is required to obtain The Swan Ecolabel.

The Airsoft Community always search for realism and optimal performance.When the performance and/or the realism in your AEG1 aren?t enough you turn to modifications toimprove the weapon. But to manufacture such modifications isn?t that easy, hence you turn tocompanies that are specialized in creating such devices.The goal with this project is to create a prototype of a modification called ?Programmable MOSFET?and targets optimization of the electrical components within the AEG. This means that you digitalizethe control of your AEG thus entails new functions and more stability to the system that isn?t possiblewith its mechanical predecessor.A prototype has been manufactured and programmed with functions according to requirementspecificationsthen it was tested on an airsoft-gearbox with rewarding results.

Demands on businesses are constantly increasing and the competition in the market-place is becoming ever tougher. To gain the long-term confidence of customers, not only the best businesses, but also the best supply chains are required.Volvo Cars is experiencing a changing competitive situation and their retailers are having trouble stocking the right spare parts. Shorter product life cycles and the growth of Volvo?s product program result in an increase in the number of spare parts to be stocked. In order to adapt to market trends and meet customer demands, Volvo has developed the LDC model, establishing a number of regional warehouses in strategic locations in Sweden, de-signed to supply spare parts to the regions? retailers through so-called Vendor-Managed In-ventory (VMI).The purpose of the study is to examine Volvo personbilar Sverige?s (VPS) motivation for a modified customer-service strategy through LDC.

This essay is a product of our examination work on candidate level in Interaction Design. The aim in this project was to design a digital wallet integrated into a cellular phone and make it as an electronic payment tool. In our project the goal has been to create a digital wallet not just for payment, but also develop it into a complete digital wallet, replacing visa, membership card, student cards, id card and receipt. Our ambition is to take care of current qualities of today's wallet and improve where it is possible so that can be replaceable with the digital wallet..

Many interactive products constructed today is not produced towards a specific targetaudience and how they will interact with the product. This master's thesis follows the designprocess in the development of the Let's Walk webapplication. In the designprocess has users of the webapplikation been identified, prototypes developed and an interactive version has been evaluated. The Let's Walk webapplication is a fully working system used to administrate Let's Walk, an exercise competition between companies. Experts and users have been involved to evaluate the Let's walk high-fidelity webapplication prototype.

This report is the result of a degree project in building engineering, at an advanced level. The project evaluated a building from a technical and historical point of view, and focused on its energy consumption, particularly the energy used for heating. The building in question was a small apartment building in Strömsholm, Sweden. It was made in 1902, from vertical logs, a not so common form of the traditional log house. The goal of the project was to evaluate if the energy consumption could be reduced in accordance with building preservation regulations, that is without damaging any of the building?s cultural or historical values.The building was surveyed with the help of archive and literature studies, interviews and inspections.

Syftet med examensarbetet är att hjälpa ett företag med att införa standardlittera för deras prefabricerade betongelement som ingår i deras Konceptet. Införandet av standardlittera ska resultera till att återfinna och gruppera deras betongelement i CAD-systemen. We did our thesis project at one of the most prestigious Swedish construction companies. We have examined the possibilities of doing sandwich elements to standard elements which would increase the degree of industrialization. The company has developed a concept that is based on a more refined process of industrialization.

This report is the result of a thesis carried out at the Department of Innovation, Design and Technology (IDT), at Mälardalen University on behalf of ABB AB Machines.The year was 1988 when ASEA and Brown Boveri formed a joint venture under the name ABB (Asea Brown Boveri).We perform our thesis at the division Discrete Automation and Motion where they primarily develops, manufactures and sells synchronous and asynchronous AC motors and generators.The main purpose of this thesis was initially to write a general packaging instruction, but the priority changed to develop more specific packaging instructions for Rotors, Stator gables, Bearing support and Outer Cover (plates) instead.The work started off to deal with a problem about that the staff had to start its work to grind away rust on the stator gables due to those stored outdoors. The result was mainly an investment in a new gable rack so that the material can be stored inside, as well as a packing instruction as it was originally intended.The problem on the bearing supports were that the staff thought it was demanding and difficult to clean them from the rustproofing they were greased in. If it is not possible to remove all rust protection it can cause the paint to not attach properly. After having compared with similar articles a test were done to order a pair of bearing supports without corrosion inhibitor, which gave good results. This initiative also set in motion a process to do the same for more different items.For special pallet, a survey were made of the process with two different VSM and a calculation of how much ABB would earn at ordering more special pallets than getting the material delivered on the A-pallets.

The notion of firms interacting with technology is not new; these types of systems were already in place in the mid eighties. E-business users worked with connections between their inbound logistics and procurement systems, and suppliers? order-entry systems. When these connections were described for the first time the vertical links between two, or more, value chains in a value system received more attention in firm strategy. The design of the linkages in the value system was said to be a product of the need for coordination and relative bargaining power.

The aim of the study was to investigate if some selected recipes could be hazardous for man; that is if pathogenic bacteria in raw ingredients could survive the cooking process. The study included three known pathogens, Listeria monocytogenes, Salmonella Typhimurium and Campylobacter jejuni. A known number of the bacterium chosen was added to the raw product. The dish was prepared according to the recipe and then a bacteriological investigation concerning the added pathogenic bacterium was performed. The results showed that all recipes tested could be hazardous; that is the added pathogen was still living after the cooking process..

This study was done regarding whether sealing or ventilation is the best solution to prevent moisture on cold attics. The authors of this report addressed the problem with moisture in attics when they started their cooperation with Peab.The methods included interviews with people, database research, and calculations of a project in Akersberga north of Stockholm. The conclusion is based on interviews and other information as they are analyzed in relation to the house of reference. The focus of this report is on problems with moisture in the attics known as cold attics.The background of the problem with moisture is that today?s slabs are usually insulated to save energy and that the attics nearly gives the climate as the outdoor climate.

Like many small-time companies there is a need to improve the flow of materials at HSP-Gripen AB. The company develops and manufactures hydraulic-powered grapples for the machine- and forest industry. By mapping the material flow in the current production and gathering necessary data, suggestions on how different parts of the production could be controlled is presented in this dissertation. This has been achieved by the study of relevant scientific literature. The suggested ways of controlling the production consist of 2-bin systems, hybrid material flow system as well as a cyclic product-planning.