Sök:

Sökresultat:

2830 Uppsatser om Out-of-season production - Sida 31 av 189

Jämförelse av solhybrider

Research in solar energy is taking big steps in both solar heating and solar electricity. It´s not only the technologies alone, but also the combination of both solar electricity and solar heating which is what is called a solar hybrid. The idea of a solar hybrid is that a solar cells efficiency decrease with increased temperature and can with help from a solar collector be cooled and the heat can be utilized. This thesis report compares heat production and electricity production with respect of, in first hand, a solar hybrids geometry in the cooler. The theory chapter describes solar heating and how different solar cell technologies work and their environmental impact at the production and how compatible these technologies are for the solar hybrid.

Conqueror för Indigo

Conqueror for Indigo is production treated with an active chemical to maximize the ink adhesion.ArjoWiggins has found that another chemical, the candidate compound, would improve the propertiesof the paper. ArjoWiggins therefore wish to replace the current compound. To strengthenthe patent requirements for ink adhesion needs to be determined. A theory is developed to whychemicals with certain properties maximize the ink adhesion. Experiments are performed but theresults are inaccurate.

Reproduktion och reproduktionsproblem hos taxtikar

Artificial insemination (AI) has had a great influence on the development of pig production and is today widely practiced (Gerrit et al., 2005). With AI, genetic progress can at a short period of time be spread worldwide compared with using natural service and the best boars can be intensively used. This is also one of the biggest risks with AI; the impact of semen containing a genetic disease or contamination of pathogens can be enormous. Fortunately, it is a small risk of disease transmission due to many tests of the boars and the semen before use (Maes et al, 2008). It is important that the boars used for insemination have good breeding values along with good reproduction features and have good fertility results (Robinson et al., 2005).

Ekologisk och småskalig uppfödning av slaktkyckling och kalkon i Sverige :

In Sweden in January 2005, there is only one producer of organic broilers and none of organic turkeys. But there are, on the other hand, a few small-scale producers whose housing systems to some extent are similar to what is stipulated in the organic standards. The aims of this work are to investigate what housing systems are used by the Swedish small-scale producers of broilers and turkeys, what main challenges they are confronted with and if there is an interest and a possibility for a change-over to organic production. For the first part of this work a literature study was performed with the purpose of detecting the main health problems in conventional as well as smallscale production. A special focus was on coccidiosis and leg weakness as those were considered to be of particular importance. A study was made of Swedish small-scale poultry production units. In two groups of broilers from the same producer and in three flocks of turkeys the level of Eimeria oocysts in faeces and litter was investigated.

Methane emission from nitrate-treated tannin rich feed for cattle in Vietnam

In developing countries such as Vietnam the population consumes more animal products for example milk and meat than before which requires greater livestock production. Ruminants contributes to more methane emission which creates a dilemma between food production and its environmental impact. By feeding ruminants with nutritive crops which humans can not assimilate the animal performance will increase in terms of better growth and milk production without inpinging on food that can be consumed directly by humans. Increasing animal performance reduces methane emission in terms of amount of methane in kg-1 milk and meat which today is much greater in developing countries than developed countries. The aim of the study was to investigate tropical tannin-rich legumes for their potential as a feed supplement for ruminants made in vitro.

Utvärdering av tillverkningsmetoder för svarvbommar

On today?s competitive market, it is difficult to achieve profitability trough high prices on manufactured products. Profitability must be obtained through low manufacturing costs, high quality and short lead times. One of the companies on the market is Sandvik Coromant, manufacturer of tools and chips for metal cutting. This master thesis investigates the methods of manufacturing for boring bars at the manufacturing unit GVH4 at Sandvik Coromant in Gimo, Sweden.

System Monitor : Ett felsökningssystem för Paperline

When an error occurs in an IT system that is vital for the production of a major industry, the consequences can be great. To quickly identify and correct errors is important as a stop in a system can lead to a break in production, which is costly for the industry. Our task in this thesis has been to develop a system for ÅF that facilitates the debugging process of the system Paperline. The system's target audience is ÅF-call personnel that provides support for Paperline 24 hours a day if something goes wrong. The system consists of a Windows service, a database and a web application and is developed mainly with the techniques C#.NET, MVC 5, Google Charts, Javascript, HTML, CSS, and Entity Framework.

Annonsmediers miljöpåverkan : när ska miljön få en reklampaus?

The aim of the thesis was to investigate energy consumption and carbon dioxide emissions from an advertisement broadcasted on the radio or the television or distributed through press. The object was to calculate the amount of carbon dioxide emissions per individual receiver of an advertisement in Sweden. There was no room for a deeper investigation into editorial work within the framework of the thesis. Consequently, main focus of the radio and television study was on broadcasting itself and the components involved. Focus for the press study was on paper production, printing and distribution. Production and discarding of media equipment was not taken into account.

Nyttjande av korsningar i mjölkproduktionen

Farmers? main reason for crossbreeding dairy cows is that they have seen a decline in functional traits, especially in the Holstein breed. Throughout crossbreeding, the farmers can combine functional and production traits of different dairy breeds and utilize the heterosis effects which emerge when two or more breeds are crossed. Results from different studies with Holstein crossed with Jersey, Brown Swiss, Normande and Scandinavian Red have shown that the crosses had higher fertility, longer productive life, had fewer stillborn calves and had easier calvings than purebred Holstein. The Holstein crosses have shown very good results and sometimes even better than the purebred Holstein for fat production, which gave higher amount of energy corrected milk (ECM) and higher income for the farmers.

Ledares syn på avhopp inom ungdomsishockey : En kvalitativ studie bland ledare i Norrbotten om vilka faktorer som påverkar avhopp

Dropout among youth players is a problem in Swedish icehockey. Leaders in youth hockey teams work closely with players on an almost everyday basis during season and have a big influence on players and their activities. This study aims to identify possible reasons for dropouts by interviewing coaches and leaders in icehockey clubs. A total of eight coaches and leaders in different ice hockey clubs were interviewed. Results show that the coaches highlight three reasons for early dropout; focus on competition, results and too much training in younger ages..

Sveriges handelsvägar för tomat och äpple :

The market of fruit and vegetables develops continuously to become tougher and more complex. The fast development makes it difficult to keep up with all the changes. This is the case for apples and tomatoes. The purpose of this work is to explain what the trade routes are like for Swedish imports as well as the Swedish production of tomatoes and apples, both in the present and the past times. There is also an ambition to create comprehension of the trade routes.

Utveckling av ett användbart IT-stöd : för att stödja operativa arbetsrutiner

Nuclear power production carries potential risks both for the environment and for the work force. Different safety measures are employed and they stem from local rules as well as from regulatory authorities. This work describes the development of a safety promoting tool at Forsmark Power Plant, one of Sweden?s three Nuclear power plants. We describe the development of a computer based system for Pre-Job Briefing and Post-Job Debriefing.

Produktivitetsanalys ur ett LEAN-perspektiv : En studie hos OPPC, AstraZeneca

The objective of this thesis is to map the resources and methods used at the department OPPC, at AstraZeneca, and derived from that give suggestions on possible solutions that will increase their productivity.Mapping of the product flow, as well as gathering of process data, has mainly been done using observations, but consultation with the process technicians has also played a great role. Further have theoretical methods been used, based on literature studies, within the areas of Lean production and statistics.The work has incrementally gone forward since the steps taken has been restricted by the irregularity of production which led to the need of creating a fictive production flow. This has affected the lead-time calculations in the way that they are meant to give an indication, rather than an absolute truth, on how different methods described shall be used.The current state analysis showed multiple areas of improvement when defining capacity as value adding time in relation to total throughput time. Using the "standard scenario" as a basis showed that the actual production flow only constituted 50% of the total project time. Further it showed that the workflow contained more non-value adding activities than value adding activities, which is a result of how the work is distributed within the department as well as in the different projects.

Analys av tidsåtgång vid montering av aggregat på Haldex Barnes Hydraules

Haldex Barnes Hydraulics (HBH) is a company which produces hydraulic aggregates for use in forklifts, construction equipment, and trucks. The last two years the company has expanded. This has lead to an insufficient production of aggregates. Thus wishes HBH to increase their production without making to large investments.This report includes a now-state analysis of the problems and where they are. From this a further analysis of possible improvements are made.HBH works mainly with assembling and this is made manually.

Säsongspåverkan i trädgårdsföretag : följder som kan leda till kompetensförlust inom näringen

The purpose of this final thesis is to investigate the effects of seasonal changes in the horticulture industry. In this study this includes mainly garden designers, constructors of gardens and parks and horticultural businesses at Österlen. Today the most important issue,both in private and in public environment, is that the winter occupation in this area is not big enough. The consequence of this issue can result in the loss of competence to other industries if educated personnel has to stay employed only over season. The study is trying to identify and rank factors that are contributing to the problem, and propose solutions that means work opportunities for companies in the horticulture industry as well as for their employees, during twelve months of the year..

<- Föregående sida 31 Nästa sida ->