This master thesis was a subtask of a project called EMIR-1. The goal with the thesis was tobuild a system for particulate mass measurements in one of the engine test cells at KTH. Theparticulate mass measurements are planned to be measured with a TEOM.The exhaust gases must first be diluted with air before the sample is sent to the TEOM.Therefore an ejector diluter for this matter also was designed and evaluated in the thesis.Emissions measurements have been done both with and without dilution to determine thedilution ratio. Tests have been done for different speeds and loads.Problems with stability of the dilution ratio have been an issue throughout the process andpressure pulsations in the exhaust pipe are believed to be the cause. More tests have to be done tomake sure that this is the problem.One idea is to make the inner diameter of the diluter nozzle smaller and see if it changes thedilution ratio stability.

This paper is an attempt to distinguish the specifics of the conflict resolution process and the negotiations during trade conflicts. First of all, this kind of conflict almost always contains some kind of protectionism which doesn?t make sense economically. Imposing trade-barriers decrease the overall welfare of your own nation and the only winner is the protected sector. These policies can be introduced since the political pressure from threatened industries is usually much stronger than the pressure from the consumers who will bear the burden of protectionism.

Volvo Construction Equipment is a world leading company in construction machinery. Tomaintain the best products, development is prioritized. The master thesis regards sound reductionof the hydraulic system on a wheel loader. The background to the master thesis is asimulation made on the hydraulic system, performed autumn 2005. The result of the simulationshows that the energy of the pressure ripple is reduced when the paralleled hydraulicpumps are phase shifted and reduces each others pump pulsations.

Background: Peripheral arterial disease (PAD), as a consequence of atherosclerosis in the arteria of the limbs, affects one of ten Swedes older than 65. PAD can develop slowly and silently, and involves an increased risk for cardiac infarction and stroke. Measurement of the patient´s ankle blood pressure and calculation of the ankle-brachial index is an evidence-based method to discover PAD. Objective: To investigate how district nurses and general practitioners perceive this method of examination and experience possible obstacles to why it is not more commonly applied at primary health care centres. Method: Data collected by semi-structured interviews have been processed by qualitative content analysis with a manifest onset.

Patienter med morbid obesitas har en ökad risk för atelektasbildning och postoperativarespiratoriska komplikationer efter generell anestesi på grund av sänkt vitalkapacitet (VC),funktionel residualkapacitet (FRC) och total lungkapacitet (TLC). Tidigare forskning har visat attPostoperativ Bi-level Positiv Airway Pressure (BIPAP) ventilations behandling minskar denna risk.Denna studie avsåg att utvärdera om postoperativ BIPAP-behandling förbättrar patienternas SpO2,paO2 , paCO2 och pH i arteriellt blod efter genomgången elektiv gastric bypass kirurgi jämfört medtraditionell postoperativ behandling. Insamlat material från 18 patienter huvudsakligen bestående avarteriella blodgaser och bakgrundsdata analyserades med analytisk statistisk. För att kunna beskrivahur patienterna upplevde BIPAP-behandlingen ställdes två öppna frågor ställdes till patienterna,.Resultatet visar att postoperativ behandling med BIPAP under 3 timmar ger högre SpO2 och lägrepaCO2 än traditionell postoperativ behandling efter elektiv gastric bypass kirurgi. Vid bådabehandlingarna sjunker paO2 och pH är oförändrat.

As EU?s authority increased the number of lobbies in Brussels grew. Today there are approximately 15 000 lobbyists in Brussels. EU decisions and EU directives can have a huge impact on companies and organizations. They can however influence these decisions and directives through lobbying.

This bachelor thesis in mechanical engineering was performed during the spring2015 in collaboration with Composite Consulting Group in Laholm. TheComposites Consulting Group works mainly with design and details of differentcomposite projects, their main area is FE-calculations, 3D-modelling andmechanical tests with composite materials.The aim of this bachelor thesis was to simplify the calculation process of solidmechanics for sandwich panels by simulation with computer software. The goalwas to decrease the time for the design and calculation process of the constructionand the cost of the practical tests. Our task was to build a static three dimensionalmodel with the computer software Abaqus, where the result should correspondwith the practical pressure tests in laboratory.The project started with collection of material data from Composites ConsultingGroup and by learning the software Abaqus, simultaneously a specification wasdeveloped in corporation with the company. Later on, a static wheel pressuremodel in the software Abaqus was produced which simulated the behavior of thesandwich panel during static wheel-pressure by a pallet truck.

Much attention has been directed to Charity Foundations and how they use the donations given to them. Donators and external organisations put pressure on and evaluate the performance of Charity Foundations. The purpose of this thesis is to increase the understanding of how Charity Foundations handle the pressure from external parties through a qualitative case study of one Swedish Charity Foundation. The most important external factors have been identified and the accountability relationships between each party and the Charity Foundation have been examined. The empirical material was collected through semi-structured interviews and from written sources.

The aim of this Masters thesis is to examine how identity formation is described in a few Swedish youth novels written in the 21^st century. We apply the theories of the psychiatrist Jan Ramström and the sociologist Anthony Giddens who both assume that identity is formed in relation to the environment. Ramström stresses that adults have an important role to play in the integration of the adolescents into the adult society. Giddens stresses that people in the late modernity are affected in their identity formations because of the loss of traditions. In order to find out how identity is formed, four main questions were constructed.

The purpose of this trial was to evaluate the possibility to use sampling of faeces, urine and plasma, and measurements of blood pressure as methods of discovering hypomagnesemia in horses, as well as the application handiness of these methods. The most commonly used method of checking the magnesium status of a horse is to analyze samples of serum or plasma. The trial was of a switch-back design, in which the horses were used as their own controls. The animal material was five Swedish warm blooded trotters between six to ten years old, and weighing between 485-620 kg. The trial consisted of three periods that were two months each.

In the 1980?s the moose population in Sweden grew explosively due to big changes in the silviculture with clear cuttings instead of single-tree selection. Clear cuttings brought big areas of young forest and therefore a lot of fodder in one place. Since this change, the discussion about how to manage the moose population has grown into a very big problem. Forest owners think that the population needs to be strongly reduced because of all the damage that is done to the young forest when the moose seeks its food, and the economic losses because of that.

The European Brown bear (Ursus arctos) has gone from basically being extinct in Sweden to, 2008 being estimated to a total of 3298 individuals. When looking at the new Swedish moose management system it is important to have an ecosystem-based approach and therefore include all the parts that moose impacts on and from in the management, especially the brown bear. Primarily in the spring and early summer the brown bear is a significant predator on moose calfs which must be taken into account in moose management. When the bear recolonize areas that it has previously been eradicated from, it will once again come in contact with people who are not accustomed to the bear's role in the ecosystem. We studied three groups of moose management areas with different predation by bears.

Test bench for air bearingsThis thesis work consisted of bringing forward and defining the test parameters relevant for a test bench and constructing a test bench that can test and verify the largest existing air bearings that are of use in Micronic Laser Systems AB machines. Because the knowledge about air bearings is limited it is thought that with the help of the test bench the knowledge would increase and in that way improve the air bearings.After learning more about air bearings and their purpose at Micronic Laser Systems AB, I started the concept phase for the test bench. For each part in the test bench I consulted my two tutors, Torbjörn Hedevärn and Johan Bergqvist, at Micronic Laser Systems AB. The final concepts where documented as 3D-modells in Solidworks and some of them have been tested in Solidworks FEM-program.The test bench is designed so that, with the help of a pneumatic cylinder, 25 kilo weights are placed on the air bearing to test its stiffness, damping and the pressure performance under its surface area. To test these parameters the test bench has to have a pressure meter, accelerometer and a microcator.

This report analyzes and examines a hypothesis for finding a method to optimize thelength of the delubrication process time based on a total charge weight. The work hasfocused on the holding time for delubrication and the total charge weight.An important step in the manufacturing chain of cutting tools is when the greenbodies undergo the sintering process. Today, the delubrication step has the sameprocess time independent of the total charge weight. An implementation of a methodto adjust the delubrication process time would give more consistent quality of thecutting tool´s internal characteristics but also reduce the time course of the sinteringprocess. In the present project two methods for this goal were tested, thedevelopment of an algorithm and a weight interval subdivision with associateddelubrication process times.During delubrication a pressure increase is observed due to the decomposition of thePEG in the powder mixture.

The main aim of the study was to examine the importance of organizational climate for affective job-related wellbeing. A further aim was to investigate potential differences in employee level in the experience of organizational climate and wellbeing. Another purpose was to see if there was agreement in the view of the organizational climate among the employees. Questionnaires were collected from 44 employees at a chain store. Results showed that Integration, Involvement, Supervisory Support, Training, Welfare, Innovation and Flexibility, Goal Clarity, Efficiency, Effort, Performance Feedback, Pressure to Produce and Quality had a great influence on Enthusiasm but only Pressure to Produce and Welfare correlated with Anxiety.