SammanfattningFör svenska företag blir hållbarhetsfrågor, sustainability, allt viktigare. Idag är det inte längre en fråga om företag ska arbeta med det utan hur. Ett av de viktigaste verktygen för att kunna bedöma ett företags miljöpåverkan är livscykelanalys (Life Cycle Assessment, LCA). Det är en metod där man studerar miljöpåverkan av en produkt eller process genom hela dess livscykel. Om ett företag gör förbättring hos en produkt eller process med hjälp av LCA finns det ett stort intresse i att kunna kommunicera det till marknaden.

Uranium (U) is a naturally occurring component in bedrock and under the "right" conditions it can dissolve and move into the ground water. Since many people in Sweden depend on drilled wells as their main drinking water supply, they may be exposed to the uranium in the water. Radioactive radiation is not the major concern associated with naturally occurring uranium. It is rather the chemical properties of uranium that make it a potential danger to human health. Uranium is proven to have toxic effects with respect to the functioning of the kidneys.

During pulp and papermaking process a huge amount of water is used. The wastewater contains a large amount of pollutants and has to be treated before it reaches the recipient. In March 2004 a new bleaching plant was started up at SCA Graphic Sundsvall AB, Ortviken?s paper mill using peroxide. The production of bleached thermo mechanical pulp and thus the load to the wastewater plant increased.

Low stumps represent on their own up to 80% of the dead wood remaining on clear cuts and therefore supply suitable habitat for saproxylic insects i.e. insects depending on dead wood for their survival. Recent stump harvesting activities threaten this substrate of ecological importance and increase the anthropogenic negative impacts on these species. Because of technical and environmental reasons (nutrient leakage, erosion) guidelines for stump harvesting recommend to retain stumps standing in wet parts of clear cuts. However, stumps in wet positions might not be a satisfactory substrate for saproxylic insects and therefore might not be as much used as stumps in dry positions.

Herbicide resistance is the result of an evolutionary process where a population gradually changes from being susceptible to being resistant to an herbicide. The resistance mechanism is usually a change in the biochemistry of the weed, but in some cases changes in morphology or growth rhythm. The change is caused by random mutations. Two resistance mechanisms are found in black-grass; target site resistance and metabolic resistance.Black-grass is a tufty, winter annual grass weed, which is mainly found in milder climates. Black-grass is a big problem in Southern Europe.

Wood has always been an important material for people, and it is used for many applications. As for example, fuel for cooking and heating houses, construction materials and for constructing means of transport. Since wood also is a material that with time biologically degrades due to activity by micro organisms and wood fungi it is important to find ways to protect and further lengthen the life span of the material when in service. One method is to decrease the amount of water in the material by impregnation with an hydrophobic oil. The Linotech method which uses only pure linseed oil is one such possible method. The aim of this study was to investigate the possibility to at the same time impregnate and stain/colour wood samples of pine and spruce by using the Linotech method.

The purpose of this paper is to examine what problems cabbage growers have with the Swede Midge. The last few years the Swede Midge, Contarinia nasturtii, has become a larger problem for cabbage growers in several countries in Europe as well as in Sweden. In Canada the problems are so severe that the midge is classified as a quarantine pest and therefore certain rules have to be followed. I have collected facts of the biology, host plants and reproduction of the Swede Midge, as well as the growers experiences and the occurrence of the midge in Canada, Europe and Sweden. The Swede Midge is hard to control because of its short life cycle and the larvae are protected between the heartleaves of the plant. When the larva feeds on the growth point the plant becomes distorted, in some cases several heads develop or none at all. When the midge infests spring rape its flower buds become undeveloped and rosette like.

Sedan 1900-talets mitt har användandet av tegelkonstruktioner i bostadsbyggandet minskat kraftigt; materialet har under modernismen upplevts otidsenligt och byggnadssättet har ansetts ineffektivt. Trots att kanalmurstekniken, som är en byggteknik med bärande tegelkonstruktion och högt isoleringsvärde, togs fram på 1930-talet för att följa hårdare energihushållningskrav, har ändå lätta träregelkonstruktioner dominerat det svenska småhusbyggandet.Kraven på energihushållning har under åren ökat successivt och livscykelanalysen (LCA) har utvecklats. LCA är en metodik som analyserar produkters eller tjänsters klimatbelastning ur livscykelperspektiv. Svårigheter har dock funnits i att omsätta metodiken på större komponenter än enskilda material. Därför har europastandarder tagits fram som enkom tjänar till att systematisera livscykelanalyser av hela byggnader och de kommer att följas i denna studie.Syftet med examensarbetet är att jämföra hur ett typhus med tegel som stommaterial belastar miljön under produktion och drift i en livscykel satt till 100 år, jämfört med ett motsvarande trätyphus.

During the last year there has been a globalization of trade. Because of the development ofmore sophisticated information's - and communication technology the boundaries and thephysical distance have been smeared out between company as well as countries. Furthermoreit generates that many companies have restructured to global value chains. Because of theincreased access the marketplace has become harder and more competitive than ever.Since the customers nowadays have more access to product information the consume patternsand behaviour has been changed. Through the increased knowledge the consumers requiresmore of the products.

In Sweden, there has been a continuous increase in the volume of housing construction for dairy cattle. Since 2004, the number of new, rebuilt and extended dairy cow houses undergoing preliminary inspection by the authorities has grown. The livestock farms have mostly focused on cow units instead of calf and heifer sheds; which has led to a need for information in this area. The purpose of the study was to improve advisors? knowledge about bovine building construction and function; to enable them to provide more qualified advice to conventional and organic milk producers who sustain larger herds.

Under år 2008 användes globalt en energimängd motsvarande nästan 144 000 TWh ochav dessa stod fossila bränslen för 81 %. I Sverige uppgick energitillförseln under år2010 till totalt 616 TWh och av detta stod råolja/oljeprodukter för 30,4 %. Vidförbränning av fossila bränslen frigörs koldioxid, en gas som bidrar till att förstärkaväxthuseffekten. År 2000 uppmättes halten av koldioxid i atmosfären till 370 ppmv ochför att den globala temperaturen inte ska öka med mer än 2°C bör halten stanna på 450ppmv innan år 2100. Ett sätt att minska andelen av fossila bränslen är att öka andelen avförnybara energikällor, som t.ex.

Abstract The global average temperature has increased by 0,74°C over the last 100 years. Most probably, the explanation is due to increasing use of fossil fuels and the agricultural expansion of land use. The new life stile of mankind leads to increasing concentrations of greenhouse gases in the atmosphere. Food consumption contributes with approximately a quarter of the total greenhouse gas emission per person and year, why it is an important task to reduce these. The aim of this work is to quantify energy use and greenhouse gas emissions for (Swedish) herbs produced in Swedish greenhouses. The study is based on a LCA (Life Cycle Assessment) and collected data from participating companies producing herbs in pots.

During 40 years of industrial production, from the end of the 1890?s until the end of 1930?s, coal and wood distillation products were manufactured in AB Carbo?s tar factory along the River Gimån in Grötingen, in the county of Jämtland, Sweden. In accordance with the Swedish Environmental Protection Agency?s Methods for Inventories of contaminated sites, MIFO, the site in Grötingen has been identified as a potentially contaminated site. In order to determine whether toxic substances pose a threat to human health and ecological systems in the area, there was a need to investigate the presence of contaminants, their levels and potential for migration.

The county administration asked LKAB to make an inventory of possibly contaminated sites caused by their mining activity. The inventory should be performed according to the MIFO model, a method from SEPA which is used to assess a contaminated site. The first phase involves collection of information through interviews and site inspections and in phase 2 a general survey with field sampling is conducted.LKAB started the work with the first phase of the survey during 2003. During this project the information collected in Phase 1 was evaluated and 16 of the sites were chosen to proceed to MIFO Phase 2 (six sites in Kiruna, and 5 sites respectively in Svappavaara and Malmberget). The sampling of these 16 sites was performed during week 27 2004.

The county administration asked LKAB to make an inventory of possibly contaminated sites caused by their mining activity. The inventory should be performed according to the MIFO model, a method from SEPA which is used to assess a contaminated site. The first phase involves collection of information through interviews and site inspections and in phase 2 a general survey with field sampling is conducted. LKAB started the work with the first phase of the survey during 2003. During this project the information collected in Phase 1 was evaluated and 16 of the sites were chosen to proceed to MIFO Phase 2 (six sites in Kiruna, and 5 sites respectively in Svappavaara and Malmberget). The sampling of these 16 sites was performed during week 27 2004.