Today, buildings utilize 40 % of the total energy consumption. New energyrestrictions and directives have entered the construction industry. Photovoltaic is asustainable, clean and quiet solution that integrates well in the urban environment buthave not yet reached a breakthrough on the Swedish market. The conditions for solarenergy production are often set in the early planning stages where they rarely arebeing prioritized.This master of engineering project focuses on identifying problems regardingimplementation of photovoltaic in city development projects and giving suggestions topossible improvements in the planning- and construction process. It also givesrecommendations on how the conditions for energy production can be optimized inthe early zoning stage.By conducting simulations with PVsystV5.21, on three ongoing city developmentprojects in Umeå, Malmö and Stockholm and by carry out and analyzing interviewswith city planners, constructors and architects, some conclusions have been made.Several improvements, both politically, with changes in the subsidization systemand/or instatement of a new law with feed-in tariffs, and within the solar- andconstruction industry itself, with better communication between different parts of theprocess as well as better use of experience, can be made.

En operation framkallar en icke önskvärd fysiologisk reaktion hos patienten som benämns som kroppens stressvar. Stressvaret innebär att sympatiska nervsystemet aktiveras och att endokrina ändringar erhålls, bland annat minskning i sekretionen av TSH och insulin samt ökning i sekretionen av ACTH, kortisol och ADH. En viktig uppgift för en veterinär är att välja premedicineringsläkemedel innan en operation. Premedicineringsläkemedel har som främsta uppgifter att motverka det perioperativa stressvaret hos djuret, minska smärta och förstärka anestesimedlens effekt. Syftet med det här arbetet är att beskriva vad som händer i kroppen vid ett perioperativt stressvar och hur svaret kan motverkas med hjälp av premedicineringsläkemedel. Premedicineringsläkemedel väljs och kombineras från klasserna sedativa, analgetika och antikolinergika. De vanligaste använda sederande läkemedlen på svenska veterinärkliniker är dopaminantagonisten acepromazin och alfa2-agonisten medetomidin.

Oestrus in dairy cattle has changed over the last decades, the duration has decreased and the intensity of oestrus has declined. A possible explanation can be their high and increasing milk production. Heifers ability to show oestrus is probably not affected to the same extent. The aim of this study was to estimate and compare oestrus duration and strength in heifers of the Swedish Red and Holstein breeds. Standing oestrus has been the primary oestrus sign during many years.

The competition in the milk industry has increased during the last couple of years. This is a result of the trade barrier that dissolved when Sweden entered the European Union. The membership signifies an increased internationalization for the dairies, which has also increased the existence of low price chains in the Swedish food market. The increased share of private brands has strengthened the competitive situation for the manufacturer- owned brands. Three of Sweden?s seven largest dairies have now decided to launch a low price milk to cope with the competitive situation.

Insufficient intake of vegetables is a reason for micronutrient deficiencies and malnutrition in developing countries. With urbanization, globalization and a growing world population it is of major importance to secure sufficient food supply for the world?s population. Part of the solution to increased food security among the world?s poor could be the introduction of vegetable home gardens, plots for small scale vegetable production which can provide households with sufficient vegetables as well as serve as an extra income source. The study Improving peri-urban home gardens aims at examining the existence of vegetable home gardens in the peri-urban areas of Hyderabad, India.

Metabolic diseases in dairy cows are considered to increase the risk for claw lesions, most of all laminitis, sole haemorrhages and sole ulcers, but also to increase the risk for environmental claw lesions. The aim of this study was to compare claw health in 27 Swedish dairy farms, 18 with high incidence of metabolic diseases and 9 with low incidence. Data on claw health status was retrieved from recordings at routine claw trimmings and analysed on herd level regarding the prevalence of: any lesion, interdigital dermatitis, heel-horn erosion, sole haemorrhages, sole ulcer, lameness, abnormal claw shape, and other diseases (abscess in the white line, limb disorders, double sole, laminitic groove, white line disease, interdigital phlegmon, interdigital hyperplasia, toe abscess and verucose dermatitis). Mean prevalence of any lesion for herds with low incidence of metabolic diseases was 48 % and in herds with high incidence 41 %, and there was no statistical difference between the two groups. Mean prevalence for interdigital dermatitis was 2,0 % and 6.4 % in the low and high incidence groups, respectively (p.

Title Becoming involved in the planning process - from the construction workers perspective.University/Institution Halmstad UniversityKeywordsEmpowerment through participation, construction workers involvement in decision making in the planning process, knowledge management and communication in the planning process, partnering, human resource managementAimThe aim of this bachelor thesis is to provide knowledge and examine how construction workers perceive involvement in the planning process of partnering projects, what they can contribute and what they get out of the planning process.Methodology The study was conducted with a qualitative approach in the form of semi-structured interviews.          The interview studie consist of 10 interviews with construction workers who are specially educated in participating in the planning process at the company ByggDialog AB.ConclusionAll respondents are positive to be involved in the planning process. The main advantages they can see is that they are able to influence technical solutions and methods that will be used later on in the production. Therefore it is important to consider when construction workers should be involved in the planning process so that they get the chance to influence in this decisions.When it comes to the decision making the construction workers should be involved in the decisions that are related to their tasks in the production such as technical solutions, choice of methods and materials. Their main duties and working hours should be in the production.Involvement in planning does not automatically mean that the construction workers are involved in the decision making, it is up to them how much they participate.

Examensarbetet utfördes på NCC Halmstad under våren 2010. Syftet med examensarbetet var att klargöra vad visuell metodik kan tillföra byggbranschen och hur det upplevs av personer som utför byggprojektArbetet innefattar en kvalitativ och en litteraturstudie. Den kvalitativa studien genomfördes med hjälp av sju intervjuer inom Region Syd med personer som arbetat med den visuella metoden NCC Projektplanering. Intervjuerna har ägt rum för att ta reda på hur den visuella metodiken fungerar i praktiken.Litteraturstudien innefattar en utredning av begreppen Lean, Lean Production, Lean Construction, Last Planner och NCC Projektplanering. Den röda tråden från Lean till NCC Projektplanering är att genom ständigt förbättringsarbete skapa engagemang och ökad delaktighet.Den generella uppfattningen av NCC Projektplanering är positiv, dock varierar uppfattningen av metoden efter aktörernas inställning.

Gunsta is situated about 10 km east of Uppsala. Today there are plans to establish 1000 new households in Gunsta before year 2030. The required energy for heating houses and water would be distributed via a district heating system, which also includes 200 existing residences. The annual required energy, according to this study, would be 16.2 GWh with a maximal peak effect of 6.9 MW. To meet this need, the study suggests a system with heat pumps to upgrade the 31?C water from a 1.8 kilometre deep borehole.

Swedish agriculture faces future challenges regarding food production and land use. Increased competition for agricultural land creates complex situations, where conflicts may arise when productive crop land is in demand not only for food production but also energy- and fodder production. On top of that there is an obvious conflict of goals between agricultural production and non-agricultural exploitation of agricultural land. In several emerging economic regions it is noticeable how agricultural land is being expropriated for development of urban settlement and infrastructure, carrying potentially significant long-term effects. During the last decade the exploitation of agricultural land in activities other than food production has increased in Sweden and is expected to continue in the same manor. Approximately 700 hectare of land in Sweden is diverted from food production, annually, and in 2013, the Uppsala Municipality showed the greatest change in land use of all municipalities (SCB, 2013).

The public sector is a major purchaser of goods and services. By setting requirements for environmental and social considerations in public procurement, an authority has the possibility to use consumer power to influence the actors in a market. The purpose of this paper is to investigate public procurement of textile products in a municipality, in order to gain knowledge about factors that may be important for the use of environmental and social criteria. Håkan Hydén´s (professor in sociology of law) norm model was used as the basis of the analysis, where the conduct was investigated along three dimensions of the norm ? willingness, knowledge and system conditions ? in order to identify underlying factors that can influence the process.The results ? analyzed by using interviews and documents ? show that the procurer's willingness, motivation and knowledge are important factors in this context, as well as the political priority of the municipality.

Foreseeing future changes in economic activity is of up most importance to a wide array of actors. The time lag in the presentation of official GDP statistics means that to somewhat accurately capture a tendency of where the business cycle is heading one need turn to qualitative sentiment indicators such as Purchasing Managers? Index (PMI) and official sentiment indicators for valuable clues. This thesis uses in-sample and out-of-sample methods to evaluate how well PMI and official Business Tendency Surveys (BTS) in Sweden and Denmark fair against the year-on-year growth rate of industrial production. Moreover, various Swedish regional sentiment indicators get examined and a case study of the indicator for the Öresund region is performed.

Inspection errors are nowadays usually written with pen and paper during building inspections. A company in Stockholm is developing a method by which inspections are made digitally from the beginning and where the inspection attachments shall be stored in a database. The idea of this method is that entrepreneurs can use the database to get an experience feedback from previous surveys so that they can improve their production processes. One problem that occurs is how inspection errors will be sorted into the database. They have to be sorted so that contractors or clients can use and sort out the information in a sensible way when they want to evaluate and make improvements in their production processes.This thesis examines how the inspection errors can be sorted in a structured manner.

AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

The art of producing films have been around for more than a century and the technology just continues to evolve. But although much has happened in 100 years, there are also processes, theories and practices that look the same now as then. I write this thesis because I want to find the differences between the analogue and the digital way of production. This study is based on a qualitative approach because my ambition is to seek the views concerning film production processes. The advantages of analogue film is that it contains more information than the digital formats and that it has a more cinematic style.