This thesis describes redesign and adaption of a products housing. In order to make it more economical to produce at a lower production volume. The thesis is based upon a prototype that a previous student developed for injection moulding. The goal is to find alternative manufacturing methods, but also to identify parameters that affect the cost of the injection moulding tool.The housing must be tough in order to protect the circuit board inside. But at the same time it must allow sound, light an electrical communication to pass through.

Opcon Powerbox is a product developed by Opcon together with the underlying company SRM (Svenska Rotor Maskiner) where surplus heat from the industry is used through an Organic Rankine Cycle (ORC)?process to produce electricity. An ORC-process is a thermodynamic circle process in which a refrigerant is used as the working fluid. The refrigerant makes it possible for the circle process to operate at lower temperatures than the conventional Rankine process.In this master?s thesis a data analysis software for the Opcon Powerbox has been developed in which measurement data is retrieved and handled from the Opcon Powerbox.

The right usage of tacit and explicit knowledge is becoming increasingly important for businesses worldwide. This thesis searches the answer to how management consultants tackle the challenges originating from converting this type of knowledge into codified use. With the help of a case study analysis it was possible to gain special insight into the processes of knowledge collection, codification and re-usage at a major organization built upon knowledge utilization. In order to provide the reader with a wider picture, the main subject of the study has been analyzed from two perspectives: a practice based and an objective based perspective. Furthermore, two different types of knowledge, tacit and explicit have been differentiated and studied in relation to each other, to gain a better understanding of their origin and conversion process.

Googling their employees and job seekers are becoming more common andin that we live our lives more and more on the internet it becomes moreimportant how we act and to think about what you publish on the internet.Each time you press a key, will leave a digital footprint behind and thereforeit?s important to know how to deal with this. The purpose was to describehow a person strategically can proceed to build an identity on the internet toget benefits in the job seeking process in the media industry and to describethe importance of the digital identity in the recruitment process in a smallertown. We?ve used a qualitative approach and made eight interviews withrecruiters from the media and also people who have built a digital identity.We?ve used Bauman?s theory about consumer society, Montoya?s eight lawsof personal branding and also theories about profiling, and communicationsplanning to analyze the material.

Companies constantly strive for the perfect order which enables them to satisfy and retain their customers. This is a difficult process that can be facilitated by using different picking technologies. In this study, a research of the picking technologies Pick-to-Light and Pick-to-Voice have been made to investigate when each technology is suited.In order to collect relevant information and data to be able to answer the question formulation, a qualitative study with interviews have been made. The purpose of this essay was to investigate Pick-to-Light and Pick-to-Voice to see when each technology is best suited and to see what the differences between the technologies are. With our essay we wanted to help manufacturing companies to make the right decisions when implementing a picking technology.The results showed that those picking technologies give companies a higher picking quality and an increased work efficiency since the order picking is faster to perform, and that picking errors are reduced.

As a designer, I find myself daily being confronted with choices which eventually can be summarizedas how we experience something. What?s the function, feeling, what colors should there be, shapes,materials, etc. Different parts will be combined to create an entirety. The only question is why we areaffected so differently by the same entirety.In this project I have examined how the relationship between a space and a product affects ourperception of a coherensy and what it is that makes us experience it so differently.I wanted to find a way to methodically explore the importance of the coherency for the experience ofa product and a space in relation to each other, in order to produce a material that can form the basisfor further work on the spatial context.I?ve looked into the psycological term central coherence and formed a scale that shows the humanabilities to perceive a context in various psychological conditions.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

Internet commerce is nowadays a well known phenomenon. There is awareness that a lot of newly created companies operate their business through the Internet. You can see a tendency where many young people try to establish an Internet business with the hope of success and expansion on today?s fierce market rivalry. To achieve success, companies have to consider factors like business concept, logistic knowledge, future vision, resources and contacts when initializing their business.Having this in mind, we can clarify the purpose with this paper: ?To analyze in what way On-line shopping companies that sell consumer electronics, cell phones and music/entertainment products, have expanded? The paper is based on telephone interviews with three On-line shopping companies.

Everywhere you look in today?s society many kinds of people are constantly interacting with each other. Especially in large groups of people working together, the phenomenon is even greater. In the construction industry there are many kinds of parts that need to come together in order to get sustainable and successful results. Therefore the relationship between the contractor and the construction client must be at its best.

?A designer rarely works alone?. The first sentence of Jonas Löwgren and Erik Stolterman's chapter on design as a social process made me curious. What if a designer worked alone? What are the actual differences between working on a project alone and as part of a group? How would it influence the creative process? What would be different when coming up with ideas, meeting with clients and setting deadlines? Does the influence of another designer stifle the individual creativity or does it actually nurish it? This paper is written to answer these and other questions as well as take you through the creative process of the production of ?Daddy? - the music video..

Sweden is going through big changes within the bank sector. Increasing card usage, decrease of cash acceptance in the society, an attempt to reduce money laundering, and a possible increase in profitability has lead to the rescindment of cash management among three of the four major banks. This has lead to a big debate in the society, a lot of frustration from customers, and a drop in customer satisfaction for every bank that started the process of removing cash management. The purpose of this study is to find out how the banks could keep their customer satisfaction when removing cash management. When doing the study, the rescindment of cash was a deduction of a part of the service, compared to the normal adding or starting of a service. The study was done through a focus group that was the base of a questionnaire that got answered by 125 respondents.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

The purpose of this work is to design and construct a device able to measure the mechanical attrition of oxygen carrier particles. Those particles are used in chemical looping combustion and in the present situation there is a lack of knowledge in how the attrition process work and in which extension. To find already tested solutions trying to answering this problem a literature study wascarried out and the best solution found was the so called Grace-Davison Jet-Cup method. This method is supposed to emulate the attrition caused by a cyclone separator and its advantages are that it is possible to use small test amounts, 5-10 g, and a thirty minutes long test will be enough to acquire useable results. An device was designed based on the Jet-Cup method with some slight modifications.

Religious phenomena, such as prayer, have more or less always interested and engaged people, but most likely for different purposes. Since the early 20th century, starting notably with Edmund Husserl and especially Martin Heidegger, phenomenologists have taken an interest in understanding and expounding the meaning of religious phenomena. The attention of such a discourse have not ceased but is rather current, and also of importance seeing that religious themes, such as prayer, still occupy a great extent of human life and practice.Phenomenology of religion is not a science of religion: the former approaches religion in terms of its meaningfulness, whereas the latter as an object of inquiry and in the same manner as an economist approaches economical indicators in order to understand and explain how the whole economy functions. In other words, phenomenology of religion expounds religion, as it were, from within, while science of religion does it from without or externally.When approaching prayer phenomenologically, it shows itself to be a process or structure through which the one praying empty himself in order to be able to receive the valuable presence of the other. The value that is received from the other will also be reflected by the one praying and in that sense effect his surroundings and fellow humans..