In this thesis an energy analysis of ethanol production at the ethanol plant of Lantmännen Agroetanol in Norrköping has been performed. The ethanol plant has been studied in combination with Händelöverket, the combined heat and power plant which provides the ethanol process with steam. The purpose of this study was to determine the energy consumption for the whole production chain from grain to ethanol. The analysis has included the energy consumption for cultivation of grain, production of chemicals, the production chain for wood chips, the steam production and the ethanol plant. The grain and wood chips are both considered raw materials there for the energy content in these are not included as energy input in the system.

In this thesis an energy analysis of ethanol production at the ethanol plant of Lantmännen Agroetanol in Norrköping has been performed. The ethanol plant has been studied in combination with Händelöverket, the combined heat and power plant which provides the ethanol process with steam. The purpose of this study was to determine the energy consumption for the whole production chain from grain to ethanol. The analysis has included the energy consumption for cultivation of grain, production of chemicals, the production chain for wood chips, the steam production and the ethanol plant. The grain and wood chips are both considered raw materials there for the energy content in these are not included as energy input in the system.

In Sweden, the demand for bio energy has increased in recent years due to the current energy and climate debate. In 2008, the energy supply of Sweden was 612 TWh, biofuels accounted for 123 TWh of these. Stumps have been highlighted as a potential fuel in recent years and the Swedish Forest Agency expects a technically and biologically feasible potential of 20.7 TWh annually between 2010 and 2019. The idea of utilize stumps is not new. During the 19th century stumps were used for tar production and during the 70?s and 80?s attempts were made to use stumps in the pulp industry.

Tolerance and resistance are two different defence mechanisms within the immune system that differ from each other in many ways: However it is not clear which of the two is the most advantageous in dairy production. Resistance is described as the ability to fight a pathogen in a host. Tolerance is, on the other hand, not aggressive to the pathogen per se, but rather protects the host and its tissues. Furthermore tolerance rather offsets the toxin from, for example, a parasite whilst resistance offsets the parasite itself. Resistance is however disease specific, which means breeding for a large number of diseases is needed in order to make resistance worth the cost for the host.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

The agricultural sector accounts for about 13 percent of the total load of greenhouse gas emissions from Sweden (Swedish Environmental Protection Agency, 2007). The Swedish objective to reduce the greenhouse gas emissions with 40 percentage units to the year of 2020, based upon the year of 1990, might imply stricter regulations for Swedish farmers. A regulation or other forms of economic incentives is probably necessary to reduce the emissions originating from the agricultural sector. This study aims to investigate the economic and managerial impact on two agricultural firms with differing production system given that a constraint on green house gas emissions is introduced. Gases included in this study are carbon dioxide, methane and nitrous oxide.

In family firms altruistic effects can arise in order to preserve the ownership of the firm within the family. The family firm may chose to carry or take measures against these effects. Regardless, it will lead to different agent costs. Therefore, the aims of the study were to explain how altruistic effects in family firms exert an influence on the administrative systems and possible counter measures.In order to explain the origin of altruistic effects, we built a theory which showed that the altruistic effects were followed by agent costs. The family can take measures to counteract these original effects.

The purpose of this thesis is to gain a deeper understanding of Swedish companies? use of corporate sponsorships as a tool for communication. The research describes motives and goals of corporate sponsorships, the selecting process and methods used in evaluating its effects. The empirical data has been colleted through interviews with two companies sponsoring athletics at a top level in Sweden. The study shows that the principal objectives and motives companies have with sponsorships are related to brand exposure, image improvement and relationships.

Uppsala University Library owns eight volumes of manuscripts attributed to the academy equerry Johan Leven Ekelund (c.1701?1775). In this thesis, I apply methods from the field of material culture studies in order to establish which of the volumes that formed the donation from Leven to the library mentioned in his will. By mapping certain markers such as places, names and dates I am able to identify to some extent where Leven gained his practical skills and which writers influenced him. By analysing the texts, I draw the conclusion that the manuscripts can be divided into groups aimed for different audiences.

This is a thesis performed at GEMS PET Systems AB in Uppsala. GEMS PET Systems AB is a company within GE Healthcare. GEMS PET Systems develops and manufactures equipment for manufacturing of radioactive isotopes for PET which is a scanner used in medical applications. The systems includes an accelerator of cyclotron type and other support equipment. One system is shipped in two or three containers depending on order configuration.

This thesis concerns agreements for the exchange of information relating to tax matters between Sweden and the previous tax havens Monaco and Liechtenstein. Monaco does not apply any tax on income or capital for individuals and Liechtenstein has strict bank secrecy, both aspects are supposed to be counteracted by similar agreements. The purpose is to investigate whether the entered agreements increases transparency and effective exchange of information in accordance with the OECD´s objectives in the area. Furthermore, is there any regulation in the agreements that can be seen as potentially loopholes to avoid the exchange of information and if so; may these loopholes be justified in any way?OECD believe that the tax havens favorable tax regulation is resulting in harmful tax competition and they identify lack of transparency and lack of effective exchange of information as the main reasons.

The Swedish healthcare system is characterized by lack of resources and extensive hospital queues. In order to counter these difficulties the Lund University Hospital have introduced Lean Healthcare to the hospital organization. The purpose of this scientific paper is to study the relationship between the implementation of Lean Healthcare and the experienced motivation among the staff. This essay thereby intends to impart knowledge, which could be used on future implementations of Lean Healthcare at other hospitals. In order to fulfil the purpose of this essay a case study have been conducted at two wards at the Lund University Hospital in which qualitative research interviews have been the method chosen in order to gather data.

In this thesis, a transparent model of the human head has been constructed which was filled with a substance that represented the brain. This model was later crash tested. This was done in order to examine how a transparent model of the human head can be constructed to generate accurate data from crash tests. It was also done in order to examine how impacts on the front of the head can deform the rear of the brain. When a head is decelerating, the brain moves forward inside the skull and may hit the front of the skull.

The purpose of this thesis is to explore whether male kindergarten teachers perceive additional expectations from their surroundings (such as co-workers and parents). Furthermore, we aim to understand and explain how these expectations are related to gender norms and hierarchies in society, that is social constructions concerning what men and women should do and be like. In addition, the thesis aspire to understand and explain how these constructions relate to more specific social constructions about sexual molestations in kindergarten contexts and explore how these discourses influence male kindergarten teachers in their work including which strategies they use in order to cope with them.How do male kindergarten teachers perceive additional expectations from their surroundings?How do male kindergarten teachers perceive the effects and consequences of the social constructions about sexual molestations in kindergarten contexts? Do they use coping strategies in order to attend to the expectations projected on them, and if so, what kind of strategies? The thesis is based on a phenomenological approach and conducted through interviews with six male kindergarten teachers. The interviews were directed with an interview guide in hand while allowing for spontaneous input from the interviewee.

The saw blade producer, Håkansson Sågblad AB, patented in the U.S. a new blade profiledesigned specially to cut fish and meat. The most important advantage of that blade is that its teethare not set, therefore the material lost when cutting is really smaller. The special geometry of thatprofile made that nobody had found a proper way to produce it before.The goal of the outlined work is to develop a machine to produce these new blades in afeasible way.The research approach of the project can roughly be divided into three phases:1.- Invention and development of a proper distribution of blades to produce a big amount ofthem at the same time.2.- Research of the best production process to produce the blades.3.- Main design of the machine to produce the blades.In the Thesis these three points are carefully developed and studied in the form of the startpoint of a really bigger project. Some tests had been done in order to prove all the analytical ideasand the results obtained had been satisfactory enough to give Håkansson the start point of a bigbusiness.