The aim of this study is to evaluate an alternative projection of the Medial Coronoid Process (MCP) of the canine elbow joint. The projection (Di35M-PrLO) was, to my knowledge, first mentioned in an article by Haudiquet et al in 2002. In that article the projection was tested in vitro, and a good sensitivity was showed for the Medial Coronoid Process. The projection might be helpful in cases of suspected Fragmented Coronoid Process (FCP) . This study is divided into three parts. The first part is an in-vivo test of the projection, including technique and subjective evaluation of the outlining of the MCP.

Due to increasing regulations regarding new diesel vehicles particulate matteremissions the new Scania truck, Scania Euro 6, has been equipped with a particulatefilter. This component effectively stores the particles in the exhaust gas but must becleaned in order to prevent itself from clogging. The filter is cleaned through aprocess named regeneration which is a thermodynamic process in which thetemperature of the filter is raised through fuel supplied to the exhaust gas.The purpose of this thesis is to contribute to the development of improved controlstrategies of the temperature during the regeneration process through thedevelopment of model-based controllers. These controllers are designed in order tohave good performance in stationary as well as automatic regeneration.In order to develop these model-based controllers a model of the system isconstructed. The model is described as a linear thermodynamic grey-box model withflow varying parameters, showing good results in validation.The model provides a simulation environment during the controller design, which isfocused around the development of linear regulators with the exhaust gas mass flowas a scheduling variable whose size determines controllers? mode of operation.

Introduction: How to implement and integrate cultural aspects in strategy making and planning in order for cities and regions to reap both social and economic benefits has been widely discussed in recent years. This method of working with culture, both as an economic, as well as an identity strengthening tool has come to be labeled as cultural planning. But in order for these ideas about cultural projects and institutions to become a reality, something has to be done. This is where the entrepreneur enters.The Glass Factory, a newly opened cultural establishment in the heart of the Glass Kingdom in Småland, Sweden, became the subject of empirical investigation for this paper. As this originally was an initiative from Emmaboda municipality the planning and start-up procedure could be viewed as a cultural planning process.

Lean is one of the recent years most popular methods for organizations to use in order to increase efficiency, productivity and quality. Despite Lean's increased popularity, Lean is still difficult to define and can be explained and described in different ways. Previous studies have also shown that Lean is difficult to implement and challenging to maintain successfully. Knowledge of Lean is viewed as a necessity in the implementation of Lean, which leads to that organizations often chooses to bring in this knowledge through external consultants or other experts in order to implement Lean in their organization. Thus, it is interesting to examine the consultants view on Lean and the implementation process of Lean.

The purpose of this study was to examine if there was a relation between birth order, gender and locus of control. There where 162 participants in the study, 44 men, 115 women. Birth order was coded into three levels. There where no significant differences between birth order and locus of control. The result showed that female participants where more external when it came to locus of control.

The primary focus of this Master thesis is to study how industrial house building can be implemented during production of rental flats under the terms of public procurement. In order to determine a suitable working process as well as presenting a possible architectonic result of the process, a case study is carried through.A housing projekt is designed on a site i Malmö, where the commisioner is MKB Fastighets AB and the contractor is NCC Komponent with the industrial building system NCC Komplett. The focus of the design is to accomplish high quality apartments to a resonable price, as well as solving the overall scheme for the site.The housing projekt, Kv. Flaggskepparen, built on the consept of a single house model, used to handle the entire site, shows that the building system is well suited to accomodate the commisioners demands.In order to reach the best possible architectonic result with the building system, cooperation initiatded in an early stage of the process is neccesary.A model is proposed to handle the situation under the terms of public procurement. The model suggest that the geometrical design is mainly carried out after inquiry and that architectonic qualities should mainly be defined in a non geometrial way for inquiry..

When a decision is to be made on what long term strategic forest management plan to use, consideration must often be taken to multiple objectives. Such decisions are very complex and a promising approach to handle them is by Multiple Criteria Decision Analyses (MCDA). The study is based on the problem that the MCDA that have been implemented into forest management planning have only had capacity to compare and evaluate a limited number of management plans; which means that there is a risk the most suitable plan is missed. The aim with this study was to test the applicability of combining the MCDA tools: the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) and the Analytic Hierarchy Process (AHP) for including consideration to multi-objectives into strategic forest management planning. The study was based on the process of creating and selecting a management plan, using Heureka PlanWise, suitable for all the major objectives found in the forest holdings of a municipality in northern Sweden.

Sales is the foundation for all commercial business and companies that have the best sales process in conjunction with efficient deliveries will do well in the long run. The author of this report was tasked by the Organisation in South Africa to study new/alternative ways of attracting Swedish companies to South Africa and sell the services of the Organisation to these same companies (defined as the sales process in this report) by analysing how similar international service companies do the same. A benchmarking process has been conducted with four similar service organizations in South Africa to examine how these companies work in comparison to the Organization. Surveys have been used for purposes of this study, as the methodology is well suited to provide the author a view on the opinions, perceptions and experiences of the respondents.The project aimed to develop new methods to attract Swedish companies to South Africa or improve and streamline the existing methods. The aim was also to develop new ways to sell the organization's services to Swedish companies.The study concludes that there is little focus on marketing of services within the Organisation.

The number of ideas at innovative companies usually exceeds the amount of available human ormaterial recourses, this include ideas for development of new products. Since they are not able to doeverything they want to do they have to choose between ideas to develop new products. This includesthe decision on when to start, stop or kill a project as well as the thought process of prioritizing betweenongoing and potential projects.Project Portfolio Management (PPM) is an organizational process, with the purpose of systematicallyorganizing and running the activities that aim to evaluate, select and prioritize ideas and projects fordeveloping new products. PPM include four major goals to be fulfilled; Maximizing Value of thePortfolio, Achieving a Balanced Portfolio, Achieving a Strategic Alignment and Running the RightNumber of Projects.The purpose of the thesis was to develop a more visual and formal PPM process for the early stages inproduct development in one department at St Jude Medical AB, Sweden.The thesis was conducted by following a methodology known as Process Modules. The methodology isan approach for developing a PPM process that fits a specific company.

In order to be able to change, to maintain competitiveness as a company in a world where rapid changes is part of the daily life, it is crucial to have knowledge and methods in how to change. One method, originally developed in Finland, is the Change Laboratory. This method is said to be efficient, not only concerning change aspects but also learning, since change and learning in this method is intertwined. This Master Thesis (20p.) tells about the process of conducting a Change Laboratory with a Swedish high-tech company and analyses factors in the process that makes change possible..

The purpose of this study was to investigate the possibility of streamlining the test process by utilizing pair programming. During the process, pair programming has been practiced as is defined by the Extreme programming (XP) software development methodology, with the other aspects of XP discarded. The focus of the testing itself has been toward unit testing. The methods applied has been with an experimental approach where 93 cases were attempted to be solved by either single programmers or pair programmers. What has been investigated in these experiments was the time needed to complete a case, how many test attempts were needed to solve the case, and how high a percentage of the cases were solved.

In 2009, the Swedish Basketball Federation started a Region U15 development project in order to change the structure of the regional organization to get into a more transparent and similar operations throughout the country. My purpose is to study the attitudes to the change among the region leaders in the regional operations and evaluate the change from an organizational perspective. The study is primarily based on the following questions: What are the experiences of the change process among the region leaders in the regional organization? How involved have region leaders been in the changing process? Which are the positive and negative aspects with the regional operation today? What can be done further to develop the regional operation and to what extent do the organizational change follow general organizational theories? In my study, a qualitative method was used in terms of interviews with 8 regional leaders to understand their attitude to the project and the changing process. To analyze the results of the region leaders ?responses, a transcription have been made.

The most common preventive and treatment service for children in child welfare services in Sweden is the contact family program. The number of children who are involved in the program has steadily increased. Usually it is a single mother who apply for or is offered this service. The aim with a contact family is that the parent should get respite and that the child should have its network enlarged and sometimes get a male role model.The purpose of this study was to look into how children´s perspective was considered in the contact family process. I have studied the process in order to see how it works and to see to what extent children is participating.

This thesis presents and evaluates a project, undertaken in 2001 by a librarian the writer of this thesis and a teacher. We met with a number of adults with reading and writing disabilities, and presented and discussed books and experiences of reading, with the aim to increase their joy of reading, as well as finding out more about our own ways of co-operating with each other across our professional borders. The documentation and evaluation emphasizes on the process and the results of the project, and on our own participation, by asking the following questions: How did we carry out the project? What obstacles did we meet? What went well/wrong? What did we achieve related to our goals? In order to illuminate the project from different angles, consequences of reading and writing disabilities for adults are discussed, as well as the specific nature of adult education and projects more or less related to ours. Action research is chosen as a method, because it allows the process of the project, and our own learning process, to be exposed.

This study investigated the possibility of implementing three standards, Transistion Minimized Differential Signaling (TMDS) and two versions of Stub Series Terminated Logic (SSTL), for inter-chip communication in a specific manufacturing process. The two SSTL standards were implemented in one transceiver system while TMDS was implemented in a separate system. The evaluation was done with Spice simulations on schematic level with some parasitic capacitance and resistance. The idea was to investigate the possibility of implementing these standards and get an idea of eventual shortcomings. In order to create models as a basis for evaluation, simulation environments with models for circuit board and packages were created and transmitters and receivers were designed.