In the next few years the pollutants loading at the Slottshagen wastewater treatment plant in Norrköping is going to increase due to the reason that one of the waste water treatment plant in the district will be shut down.A survey of how these different pollutants are divided in the treatment process is therefore necessary for mapping out both the loading and treatment efficiency.This can be achieved by studying mass balances.Mass balances were carried out for the water treatment process for the mechanical/chemical,biological and the chemical stage.The mass balance studies show that the treatment efficiency was very good. However in order for the mass balances to be quite consistent and to ensure complete coverage of results and conclusions i.e. more reliable results, sludge samples should be collected and taken at different times per day and the influent rate should be investigated.In this work mass balance has been set up in order to illustrate and identify the factors that should be considered and taken care of for further estimation using mass balances in the future. Furthermore this survey results in a calculating model for the mass balances at thisplant.This calculating model is used as a tool to facilitate future calculations for mass balances for the water treatment process at Slottshagens wastewater treatment plant.Moreover it provides a basis for carrying out further estimation of the treatment process in the near future.In this project the importance of some operating parameters was also taken in consideration.This calculating model can be modified so that calculations of such operating parameters i.e. sludge loading and sludge age can be easily performed.Such information can be used further to evaluate different operation alternative in order to ensure an optimal use of the treatment process with in the plant..

This thesis has been performed as a part of the Bachelor degree in Industrial Engineering and Management at the School of Engineering in Jönköping. The thesis is written on behalf of Pallco AB, which is an engineering company that performs subcontracting, surface treatment, and assembly of components, mainly in steel and aluminium. The thesis focuses on identifying and analyzing the customer order fulfillment process of three customers at Pallco AB.The main objective of the thesis is to distinguish time differences in the company?s administrative work for each of the three customers. Furthermore, Lean thinking is following as a thread through the whole thesis.

It is important to understand the process of appraisal of a business in order to establish its value. The purpose of our thesis is to establish which methods and models are used when evaluating a business and investigate the factors that may affect the value and price tag of a business. We have used a qualitative approach by conducting both indepth interviews and a survey as well as reading literature within the field. The main conslusion in our findings is that the common practice of discounted cash flow is widely used when bestowing a monetary value for a business, and in order to raise the value a well established customer relationship was the single most important factor. As far as lowering the value, the answers were of such a wide spread that a single factor could not be attributed.

Motives and reasons behind a decision to change the asylum process in Sweden are the central concern for this thesis. A symbolic political perspective will be applied in order to elucidate the symbolic factors that have influenced the decision process.The Aliens Appeal Board in Sweden will close down at the end of March 2006 and all pending and future cases will henceforth be decided by three administrative courts. This will be done in order to enhance the principles of legal certainty by making the process more transparent and oral. It is an extensive reform, but since very few amendments are made to the applicable substantive law it raises questions about the actual motives behind the change.One reason that seems to have had a major impact on the decision to close down the Aliens Appeal Board is the fact that the board is perceived as a symbol for an inhuman asylum policy. Transferring the process to the courts might ease the attempt to increase the legitimacy of the asylum process.

There are many factors in a building project that has to collaborate with one another in order to reach the desired end result, how you work with moisture issues in timber is a very important one. While constructing Varbergs Hospital, the building company Skanska came in contact with the issue of extra high demands on the moisture content in timber. What they requested from us was a moisture program in which you clearly could follow the routines regarding work with moisture in timber. The aim is to use this program as a help during the work, in order to achieve a good result.We have developed this study in addition to the moisture program. The aim is that this study will give you a deeper understanding of the important factors to consider.

The core process is responsible for internal business development and is the process that runs through the organization and the results which creates a value for the customer. Some research suggests that identification of the client's conscious or unconscious needs clarifying the so-called core process in the organization and operations can thus be more effective. The study aims to identify and analyze the experience of the core process within child health care. The method has been interviews with nine managers and 10 clinic nurses in a county. The results show a lack of knowledge regarding core process and process work.

The current thesis is on the rule of law and how the principles of the rule of law are met in thenew Swedish migration process. The migration process has been subjected to criticism duringseveral years and on different occasions. The migrations process is viewed through a ?rightsof the child? perspective, foremost to seek if the rights of the child are met. The children are avulnerable group, not the least in the process of migration.

If Swedish companies are to compete with companies in low-cost countries they have to achieve a more efficient production. The purpose of Total Productivity Maintenance (TPM) is to increase the company's profitability by increasing the productivity. TPM is a method that involves all employees and aims to prevent failures in order to increase the availability of existing equipment.The aim of this paper is to evaluate the implementation process of TPM and give recommendations for the further implementation process. The conclusion and the analysis are based on a case study done at a production department at ABB Cewe-Controls facilities in Nyköping. The case study consists mainly of qualitative data from participation observations, surveys and interviews.Commitment of the management is a key factor in the implementation process of TPM.

The aim of this thesis is to explore possible differences between public and private companies? way to manage projects. In order to analyze the managerial aspects, we have studied the project of a new payment system implemented at the public-transport organization Upplands Lokaltrafik (UL). The project enables mobile payment by text message (SMS). Most theory concerning the management of projects is developed for private companies.

The aim of this diploma work was to obtain a review of the appeal process in Sweden under the Planning and Building Act and the possibilities of appeal in the planning and building permit process. The work was intended to identify potential problems surrounding the appeal process and possible efficiency measures. The goal was to form a report that provides a satisfactory overview of the appeal process in theory and practical application as well as provide relevant concrete proposals on how the appeal process can be streamlined.Background and facts surrounding the work were taken from different types of literature and through several interviews with representatives in government, industry and politicians.The main problems related to the appeal process are in the long processing times and the high number of appeals. There is a great interest to streamline the appeals process and the government is going to launch studies in which possible future actions will be investigated.It is possible to appeal for up to two instances before you need a so called ?leave to appeal? in order for your complaint to be passed on to the next instance.

Efficiency has become an important objective for many providers of welfare services. Among Swedish schools, both private and public, increased administrative demands seemingly influence operations, and affect teachers negatively through perceived stress. Simultaneously, Swedish students scored an all-time low in the latest PISA survey, and are now performing below the OECD-average in science, mathematics and reading. A central administrative task in the Swedish elementary school is the parent-teacher conference, which is an important activity in supporting the development of the student's knowledge and social skills. Lean is a well-established operations framework, which has proven successful in order to improve process efficiency.

On the first of January 2012, a new public authority was formed in Värmland, due to a new legislation on public transport. The first task for the new public authority was to produce a plan for the development of public transport. In order to do so, it had to execute an extensive consultation process about the long-term goals of public transport. The purpose of the thesis is to investigate how a public authority can use a consultation process as a means to clarify accountability and produce unified goals. To answer that, I have done a case study about how the new regional public authority in Värmland for public transport has acted in the process of writing a plan for the development of public transport.

The core process is responsible for internal business development and is the process that runs through the organization and the results which creates a value for the customer. Some research suggests that identification of the client's conscious or unconscious needs clarifying the so-called core process in the organization and operations can thus be more effective. The study aims to identify and analyze the experience of the core process within child health care. The method has been interviews with nine managers and 10 clinic nurses in a county. The results show a lack of knowledge regarding core process and process work.

The thesis has investigated how Sandvik Coromant could implement the SMED principle on one of their grinders groups and what improvements it would lead to. The aim of the thesis is to identify the current situation and investigate how their setup times would be affected by SMED. The work initiated with a literature analysis about the SMED principles and then proceeded with an analysis of the current situation where the activity was time mapped. The analysis consisted of time trials of the process that the thesis would include. The time studies revealed opportunities for structural improvements to create environment for a more structured process.

During year 2004 Ålö AB made significant change in their production process. The production of front loaders is nowadays highly automated with short operation times. To be able to control their process in a better way Ålö recently decided that they needed a tool for simulation of their production and to shift patterns. This final thesis started with a pilot study in Ålö?s factory in Brännland.