This report is a degree paper made for the Engineering program in Technical Chemistry at the School of Engineering, Jönköping University.The intention of the project which is described, is to answer whether HV71 might become environmentally certified according to the criteria of "miljödiplomering". The project also included an investigation of which further steps and measures must be undertaken by the enterprise in order to achieve the certificate. The final part was to implement the necessary requirements for the certification.The report starts with a short background where the origin and function of environmental management is briefly explained.The report continues with how the practical work with the environmental certification was done according to requirements of Jönköping municipality. Motivations behind each part of the process are given as well as explanations of how each part of the process was carried out.The final result of the project was that HV71 took the measures needed to live up to the required demands. After a revision made by Miljöstrategen i Jönköping AB, HV71 passed the demands and became thereby an environmentally certified business..

Introduktion: Karies är en kronisk och multifaktoriell sjukdom som uppstår av samspel mellan bakterier, föda och tandytan. I Sverige har kariesförekomsten tydligt minskat, men det är fortfarande vanlig sjukdom hos individer med utländsk bakgrund. Syfte: Syftet är att undersöka kost-, munhygien- och tandvårdsvanor hos en grupp med utländsk bakgrund.         Frågeställningar: Hur ser kostvanor ut för individer med utländsk bakgrund?   Hur ser munhygiensvanor ut för individer med utländsk bakgrund? Vilka tandvårdsvanor har individer med utländsk bakgrund?    Metod: Enkätundersökning genomfördes i två svenska mindre städer och studien inkluderade totalt 44 deltagare från Svenska för invandrare (SFI) i nivå C & D.    Resultat: Alla deltagarna besvarade att de rengör tänderna minst en gång per dag.

Transdermal drug delivery, besides painfulinjections with syringes, has long been associatedwith small size particle pharmaceuticals, which candiffuse through the skin. This method of drugadministration has only been applicable on a smallnumber of drugs, where active molecules are smalland delivery time should or can be long.Other drug delivery options are oral administrationand injection with hypodermic needles (ordinaryhospital syringes). In oral administration thestomach and liver tend to dissolve the drug and theeffect becomes more difficult to anticipate, anddrug delivery rates difficult to control. Hypodermicneedles are used as a mean of drug injectiondirectly into the bloodstream. This method ispainful and risks infection due to tissue damageand skin penetration.One way to get a painless non-damaging techniquewith high delivery rate that still can delivery largemolecules is to manufacture an array of microscopichollow needles and equip them with a pumping unitthat delivers the correct amount of drugs.This thesis shows the technique and possibility ofmanufacture micromachined needles using low costtechniques of Ion Track Technology (radiation ofheavy ions creates porous materials), electrolessdeposition (non-current activated wet chemistrymethod of depositing metal) and electroplating.

Changes in swallowing function are common in elderly and chronically ill individuals. Therefore it is important to be aware of these changes and their prevalence. The aim of this study was to assess the prevalence of dysphagia in nursing homes in the municipality of Linköping, and to correlate dysphagia with variables that can be a cause or a consequence of dysphagia. These variables were gender, age, MMT-result, dentition, weight loss, medical diagnose or number of medications. The intention was also to examine the additional information regarding dysphagia supplied by pulse oximetry.Sixty nursing home residents aged 74-101 years were chosen to participate in the study.

This report investigates a possible solution to the problem with adapting wave powerplants to work in countries with tidal water. The wire connecting the buoy at the surface with the generator at the bottom needs to adjust to the varying water depth. Our solution to this problem is to attach the wire to a jack which is then placed inside the buoy. The jack is then powered by an electric engine. The report discuss what forces the buoy will be exposed to and then the structural integrity of the design is evaluated through simulations.

Millions of people are using search engines every day when they are trying to find information on the Internet. The purpose of this report is to find out how people formulate search queries. The result in this report is based on an empirical study which is based on a search log from the Swedish search engine Seek.se.One of the results in this thesis is that nearly all search queries are based on keywords..

Media has the power to influences society. Some call them the third power of a state. Through amongst others, the agenda setting theory and the framing theory, this report seeks to understand how media describes the swine influenza and how it uses its power to influence people to vaccinate. As this report will show, there is no doubt that media has had an impact on the Swedish population of which 60 per cent followed through with the vaccination. Media used an information discourse and attempted to present its articles in an impartial manner and used governmental authorities and experts to support its arguments.

This report is the result of several interviews of employees within the field of pedagogy. The background behind this report is my period as a trainee in one of the daily activities in Malmo. In daily activities the employers gets training, education and guidance in Marte meo, which is funded by public finances. The method, which this study focuses upon is called Marte meo. It is a method of communicating and developing the means for the participants to evolve their skills in communicating and increase self esteem.

This report is a bachelor thesis presented at the department of Computer Science andEngineering at Chalmers University of Technology. The aim for the project is to find a simplemethod to measure and display physical quantities in a three dimensional room.The report describes a method to construct a system for measuring differentphysical quantities via sensors. The system must be built in a modular and expandable way tobe adaptable to different tasks.The system explained in the report consists of two parts;A physical scanner with moveable probes for carrying sensors and a microcontroller forcontrolling the probes and communicating with the next part.An application written in Java for storing the measured values and presenting them in a lucidperspective.It is possible to construct the scanner with different designs and circuitry, with multiplexers andflip-flops, to ensure that an unspecified number of probes can be added to the system and thatthey can be operated simultaneously.The Java application is written in a modular way, using a design pattern that separates eachindividual part of the application. It contains exceptions and interfaces that ensure a safe andexpandable application..

Event marketing has during the last decade become a wide spread marketing method. This is because the marketing clutter has increased heavily during the past years and brands are looking for new ways to reach their target audience. The previously well accepted marketing measurement "satisfaction" has shown tendencies no longer to be sufficient for success in today's competitive marketplace. Therefore, the research has somewhat moved to the measurement "brand love" to explain differences in strategic consumer behavior. That is the background to why this report examines and answers the question if a brand through event marketing can enhance brand love.

Presently environmental and ethical matters are in the centre of attention and companies producing sustainability reports have become more common. It has also started to become more and more ordinary to assure these sustainability reports by an external part. However, the amount of assured sustainability reports differs a lot between different countries.There can be several reasons for why the companies chose to get the sustainability report assured. Previous studies state that the choice to produce sustainability reports can be re-lated to theories like the legitimacy theory, stakeholder theory and the agent theory. Other aspects that can affect the decision to construct a sustainability report can according to prior studies be different company characteristics and the national culture in the country in which the company is operating.

This report describes the construction of a climate-cabinet for testing of HV-cards (High Voltage) produced at VG Scienta. The main part of the report describes all the different components of the cabinet. The most important parts are a PID regulator from Eurotherm model 2408, a solid state contactor (SSC), a thermocouple, a finned resistor from DBK and different fans. The report even includes the connection between components by cable wiring, isolation, grounding, fuses and shaping of metal goods.As the cabinet also communicates with a computer, the report includes the solution of the data communication using the software iTools from Eurotherm. The communication part includes information about a converter that converts EIA422 to USB.The cabinet was produced at a company, called VG Scienta, in Uppsala during the spring 2010.

Media has the power to influences society. Some call them the third power of a state. Through amongst others, the agenda setting theory and the framing theory, this report seeks to understand how media describes the swine influenza and how it uses its power to influence people to vaccinate. As this report will show, there is no doubt that media has had an impact on the Swedish population of which 60 per cent followed through with the vaccination. Media used an information discourse and attempted to present its articles in an impartial manner and used governmental authorities and experts to support its arguments.

Automationscenter & Bråvalla Elteknik AB is a company that offers the market completed total solutions where the customer can operate and monitor their production from the terminal. In these total solutions they lack standard circuit which are developed by the company and which could manoeuvre/control/monitor controlled process objects. This report defines the work of developing the most common standard circuits.The report is initiated by a short theoretical part about PLC and the PLC system, with a connected terminal, which has been used. Thereafter, the turnout of the demands of specification is reported, after discussing with the supervisor in the course of the project. The report concludes with a disclosure of how the programming, the documentation and the testing have proceeded and a final discussion concerning the project and proposals on continuation.The result is a CD with the documentation of standard circuits and how they are implemented in a new project.

This report that is written in cooperation with Peab Sverige AB, studies the information and knowledge management from the production support to the production management. The conclusion of this report is that to have a good and functional information and knowledge management it is necessary that the company has a good way of regain and handling experiences from its projects. The way to do this is to develop the managing system on the production management?s terms. It is also critical to find an easy way for the production management to use the system..