This thesis work includes studies and simulation how magnetization of the translator in a linear generator for wave power can be automated. The translator is the moving component in the generator that is "dressed" with permanent magnets. The translator is magnetized with rectangle-shaped permanent magnets that are today's strongest permanent magnet type of neodymium-iron-boron (NdFeB).Eight equivalent metal sheets are mounted around the translator. The plates have milled tracks where 106 permanent magnets per sheet are mounted. Today the assembling of the magnets is done by hand, which is a very tedious and time-consuming work.  This project presents investigations about the automation of the translator magnetization theoretically and simulation results are preformed in ABB's robot simulation software RobotStudio. Even robot-held tool was designed that enables the robot to be able to magnetize the translator in a simple manner.  The investment cost is roughly 1.5 million SEK. With an economic life-time of five years, the investment costs are estimated to 24000 SEK / month.  According to the calculations, this project is very motivated to implement, as it provides savings up to 17 000 SEK per translator which is 10.2 million SEK assuming that the robot cell is operating at full speed the whole year.According to this thesis work the result is a 4x9 meter cell with two industrial robots of the type ABB IRB6650S.The cycle time to magnetize one translator was calculated to about 10 hours.This prototype of project can possibly be implemented in a full-scale production line and performed according to the calculations and simulations presented in the report. Further work is suggested to improve the tool.Lyssna .

GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.

This report was made for the company HordaGruppen AB to investigate how information security was handled. This report fits in the Master program of Internet Technology at School of Engineering in Jönköping University in Sweden.The question at issue was how you protect your information against different threats. One question was how to make an information security policy and which guidelines you can follow in the Swedish Standard, SS-ISO/IEC 17799:2000.Another question was to investigate the information sources at the company and which threats there are against it.The work begins with a presentation about information security for the chief of information and the chief of quality in the company. The next thing was to do a survey of as thing are at present with a tool from Länsteknikcentrum called ?Infosäkpulsen?.

To create a profitable and competitive business an important factor today is a well-functioning logistics. Through effective internal material flows effective logistics can be achieved. Unnecessary handling and movement of materials is a waste which affects the internal material flow. These wastes should be identified and eliminated as much as possible to improve the internal materials handling and through that achieve a more efficient business. At Fagerhults Belysning AB, where professional lighting systems are developed, manufactured and marketed, a new inventory has been built and changes in the assembly has been made during the past year.

Toothbrushing is the best available method in remaining or restore dental health in dogs. This report treats different aspects about toothbrushing and other dental home care treatments in dogs. Questions like why the dog?s teeth should be brushed, what effects toothbrushing have on dental health and how the teeth can be brushed are treated. Furthermore complements to toothbrushing are treated, the options and their effects.

In public relations and marketing, lawsuits traditionally connote crisis. The purpose of this study is to explore the design and critical considerations concerning risks and opportunities when companies voluntarily initiate lawsuits with the partial aim to get publicity in the mass media. In the following paper, the communicative aspects of two such Swedish cases in the European Court of Justice are studied?a large corporation challenging the Swedish monopoly on gambling and a small company challenging the government on their restrictions for individuals to import alcoholic beverages. The case studies have been conducted through interviews, analysis of legal acts and press articles.

Vårt syfte med examensarbetet har varit att undersöka hur förskollärare och föräldrar arbetar med barnlitteratur och högläsning i förskola och hem. Vi intervjuade därför fyra förskollärare samt lät föräldrarna till de barn som går på intervjupersonernas avdelningar fylla i en enkät. För att få kunskap om varför och hur man kan arbeta med barnlitteratur och högläsning använde vi oss av litteraturundersökning. Genom vårt intervjumaterial fann vi att förskollärarna arbetar med barnlitteratur och högläsning i olika grad och med olika metoder. Alla föräldrar i vår enkätundersökning läser högt för sina barn.

The purpose of this study is to explore how teachers at Swedish upper secondary schools perceive the so-called value words and knowledge requirements of religious studies 1 as defined by the present curriculum for upper secondary school 2011 (Gy11) how they consider themselves to apply these value words in their teaching, and whether they consider the knowledge requirements as alegitimate basis for equivalentassessment. My studyis based oninterviewswithfour teachers in religious studies at four different upper swcondary schools in the municipalityof Jönköping, Sweden. The results of my study show that the interviewed teachers perceive the value words in the knowledge requirements of religious studies 1,as defined by the present curriculum Gy11, aredifficult to interpret and that the value wordsare not definitive, but interpretable. All teachers use the knowledge requirements in theirplanning of teaching,but also in teaching where they are to concretize the knowledge requirements and value wordsthrough their own examples. Half of the teachers, however, experienced a lack of interest in the knowledge requirements by the pupils, which make it even more important to discuss knowledge requirementswith them, while the teachers?assessment has to rely on these knowledge requirements.

This thesis examines conceptions of gender revealed by people when assessing texts. The research questions are: What associations can be discerned between gender conceptions and ideas about the quality of texts? What features of content and style are perceived as female or male? The study seeks to develop a method for comparing different people?s assessments of the same text. The material was collected by means of questionnaires in which 114 informants were asked to assess three anonymous student texts and then guess the sex of the writer. The material has been analysed quantitatively by correlating the assessments of the texts with the guesses about the sex of the author, and qualitatively, as the informants? freely worded assessments of the texts were analysed for content and form with the support of assumptions about how assessments are expressed in text.

Introduktion: Hos hemlösa är behovet av tandvård stort. En frisk mun förknippas med välbefinnande, ökad självkänsla och livskvalité.Syfte: Att beskriva hur tandvårdspersonal, dagcenterpersonal och en socialtjänsteman uppfattar de hemlösas egen syn på sin munhälsa.Material och metod: kvalitativ undersökning där semi-strukturerade intervjuer användes.Urval: Studien baserades på fyra intervjuer. Informanterna i studien var i sin profession tandläkare, tandhygienist, tjänsteman på socialförvaltningen och en person som tjänstgjorde på ett dagcenter.Resultat: Presenterades i fyra kategorier, socialt hinder, tandvårdsrädsla, akut smärta och hopp om förändring. Tandvårdsrädsla har två tillhörande underkategorier, trygghet och tillit och att känna sig utlämnad. Dessa kategorier återger informanternas upplevelse i kontakten med hemlösa.Konklusion: Hemlösa upplever frustration över att det tar lång tid att få hjälp med sin tandvård..

The purpose of the thesis is to examine the relation between art, politics and ideology in contemporary art, focusing on the drawings depicting Mohammed the prophet as a dog, made by the Swedish artist Lars Vilks. His work is contextual in accordance with current art practice, thus letting everything related to the artwork become part of it, a circumstance the thesis tries to grasp in the widest respect possible. The drawings were published and spread throughout Swedish media, where they were later defended and criticized by a number of writers. Many debaters argued that the art work represents Western freedom of speech, and that to criticize them is to criticize fundamental democratic rights. This discourse tended to disqualify all arguments that questioned why such force was put into defending and spreading offensive pictures.

The purpose of this study was to investigate and compare how and why consumers of different ethnic backgrounds value and prioritize product attributes among food in certain ways. We expected to find culturally bound attitude differences and our aim was to relate those to, and challenge, present knowledge of information structures. Consequently, we also aimed to use this new knowledge of attribute attitudes in connection to assortment variety theory, as attributes constitute important motives to how consumers perceive variety. A theoretical framework was constructed to suit our purpose and function as an analytical tool, consisting of Culture perspectives, Information structures (product attributes), and Assortment variety. In this thesis we focused on attitudes and consumer perspectives and excluded actual behaviour and the retailing perspective.

This report is the result of a thesis work carried out on the Risifrutti production at the company Procordia Food AB. The thesis is at a master level and is the final work for the author to receive a Master of Science in Innovative production at Mälardalen University. The thesis comprises 30 credits and has lasted for 18 weeks. The thesis is mainly a research on whether it is possible to perform an Environmental Value Stream Map (E-VSM) in a food processing industry and an evaluation if the tools E-VSM and Green Performance Map (GPM) are useful in this type of industry. An extra part to this research is to use the results from the E-VSM and give Procordia Food AB information on improvement potentials in the Risifrutti production. The author has found it difficult to collect some of the quantitative data to the E-VSM, mainly regarding energy, but by using the Value Stream Mapping (VSM) tool and other Lean tools the author was able to identify and quantify several wastes in the Risifrutti production. Recommendations for improvements based on these wastes have been given to the company. In the research part of this report the utility of the Value Stream Map, Environmental Value Stream Map and Green Performance Map in a food processing industry have been analyzed. The author has found that the Value Stream Map has been a useful tool since waste and unevenness in the tact of the production has been identified. The Environmental Value Stream Map and the Green Performance Map are also great tools when a company wants to analyze their environmental impact and then invest in environmental improvements. However, no profound energy analyzes has been done in the Risifrutti production because of the lack of energy meters for steam, electricity and compressed air in the production lines..

This examination has been made in cooperation with Jernhusen which is an estate company owned by the government, with estates along the railways in Sweden. This assignment is to help Jernhusens business area Projektfastigheter with their experience feedback, which is to-day almost absent. Business area Projektfastigheter has the task of supporting Jernhusens three other business areas with skills and resources for the estate projects that Jernhusen runs. Jernhusen must become stronger with the collecting of experiences and as a business because of the liberalization of the railways, which leads to a more competitive market. A tool for this is successful experience feedback.The concept of experience feedback is to gain experience across a variety of cases, where individuals and/or groups can chose situations with relevant similarities and differences with current case.

The knowledge development regarding in-store marketing has shown that influencing a consumer in a store setting is a powerful tool to change the consumer?s buying patterns. However, the store as a marketing channel lacks, in many ways, conducted academic research and according to marketing theory investments into in-store marketing tend to be taken without advanced marketing consideration. As a consequence, we have chosen to generate new insights into the field of in-store marketing by studying in-store demonstrations both from a behavioral and a mental dimension. Furthermore, we have also chosen to study how different consumers with different degree of loyalty and buying patterns are influenced by an in-store demonstration.This study aimed to obtain a better understanding of in-store demonstrations through breaking down the demonstration into its core elements and from these elements construct different types of demonstrations.