The determination of the optical properties of biological tissue is an important issue in laser medicine. The optical properties define the tissue´s absorption and scattering behaviour, and can be expressed by quantities such as the albedo, the optical thickness and the anisotropy coefficient. During this project, a measurement system for the determination of the optical properties was built up. The system consists of a double integrating sphere set-up to perform the necessary reflection and transmission measurements, and a computer algorithm to calculate the optical properties from the measured data. This algorithm is called Inverse Adding Doubling method, and is based on a one-dimensional transport model.

This thesis investigates how the optical properties of paperboard influences printing with targets in ISO 12647-2. The targets for optical properties in ISO 12647-2 are defined for paperboard without optical brightening agents and fluorescent brightening agents wich makes it difficult to reach the targets when printing paperboard containing these agents.Seven different types of paperboard, some with and some without the agents, have been printed and instrumentally andvisually measured to see if there is any deviation from the standard targets and if it shows visually.The result shows that paperboard containing optical brightening agents and fluorescent brightening agents can print with targets in ISO 12647-2 but in many measurments the difference between the types of paperboard were to small to assess. The differences between the types of paperboard in the instrumental measurements did not fully correspond with the waythe panel appraised them visually..

This report present a working model for simulation of what happens to colors displayed on screens when they are observed through optical filters. The results of the model can be used to visually, on one screen, simulate another screen with an applied optical filter. The model can also produce CIE color difference values for the simulated screen colors. The model is data driven and requires spectral measurements for at least the screen to be simulated and the physical filters that will be used. The model is divided into three separate modules or steps where each of the modules can be easily replaced by alternative implementations or solutions.

In an attempt to develop a more cost-efficient material for solar   energy applications, nano-particles of nickel oxide composite in a silikatmatris manufactured with solar gelmethod and studied structurally by electron microscopy. Furthermore, the thin film optical properties characterized by Variable. Angel Spectroscopic Ellipsometry. Sol gelfilms suitability as a selective absorber surface is also analyzed by optical modeling..

Mitt arbete handlar om mötet mellan rysk konstruktivism och science fiction. Detta har jag gestaltat i ett textilt rum inspirerad av science fictionkarraktären Doktorn ur Doctor Who. Doktorn är en utomjording av en långt mer utvecklad art och från en mer avancerad civilisation än människorna, som reser i tid och rum i sitt tids-och rymdskepp TARDIS. Jag har designat ett rum som är min textila tolkning av TARDIS innersta. Arbetet kretsar kring tankar om gestaltning av en flerdimensionalitet som bara kan anas, inte ses eller förstås.

I have worked with patterns for textiles, and the goal of the project was to makethree patterns in one colorway. My wish was that the patterns would be relatedeither in motif or colorway, or both. I wanted the patterns to be seen as a minicollection. My aim was to make three patterns that would serve as home textiles.I decided to print the patterns digitally on fabric, but also to customize the designof the pattern repeats to be printed in rotary printing. I wanted to work within thelimits of what is possible to produce in terms of colors and repeat sizes.One of my goals with the project was to clarify for myself what the essence of mydesign is, and to create a collection that reflects me as a designer.

Free Space Optics (FSO) has received a great deal of attention lately both in the military and civilian information society due to its potentially high capacity, rapid deployment, portability and high security from deception and jamming. The main issue is that severe weather can have a detrimental impact on the performance, which may result in an inadequate availability. This report contains a feasibility study for an all-optical free-space link intended for short-range communication (200-500 m). Laboratory tests have been performed to evaluate the link design. Field tests were made to investigate availability and error performance under the influence of different weather conditions.

This thesis concerns partial discharges in stator windings and the possibility of analyzing data using statistical methods. Partial discharges, or PD, are a physical phenomenon in which discharges occur locally due to large electric fields. PD can occur in or adjacent to the insulation of stator windings and causes breakdown of the insulating materials. PD measurement can provide an idea of how widespread the PD activity is. A technique to measure and analyze PD that has become very popular over the last few decades is phase resolved PD patterns.

In an attempt to develop a more cost-efficient material for solar   energy applications, nano-particles of nickel oxide composite in a silikatmatris manufactured with solar gelmethod and studied structurally by electron microscopy. Furthermore, the thin film optical properties characterized by Variable. Angel Spectroscopic Ellipsometry. Sol gelfilms suitability as a selective absorber surface is also analyzed by optical modeling..

Design Patterns introducerades på 1990-talet och användningen sades medföra en rad fördelar som skulle hjälpa systemutvecklare i deras arbete. Bland annat skulle Design Patterns underlätta för systemutvecklarna att kommunicera med varandra samt ge en bättre överblick över och förståelse för systemarkitektur genom en höjd abstraktionsnivå. Systemutvecklaren skulle även få en ökad förståelse för god design. Två kritiska artiklar fick oss att vilja beskriva hur systemutvecklare som aktivt arbetar med Design Patterns upplever att centrala fördelar uppfylls. Vi genomförde fyra fallstudier där vi intervjuade erfarna systemutvecklare och vår slutsats är att de upplever att fördelarna med Design Patterns uppfylls.

The purpose of this study is to compare the energy related and environmental consequences of implementing optical sorting as a means of waste collection with those of reducing food waste. In addition to studying the possibility of implementing optical sorting in downtown Stockholm, the yielded amounts of energy from waste collection and reduced wastage will be calculated. This is done by way of literature reviews and interviews. The amount of energy that can be generated through optical sorting and biogas production via anaerobic digestion in downtown Stockholm is 29-44 TJ/year, compared to 118 TJ/year saved by completely eliminating food waste. The generated biogas can replace fossil fuels, but the required food waste contributes to increased greenhouse gas emissions as well as reduced bio diversity and eutrophication during the wasted food?s lifecycle.

This thesis concerns partial discharges in stator windings and the possibility of analyzing data using statistical methods. Partial discharges, or PD, are a physical phenomenon in which discharges occur locally due to large electric fields. PD can occur in or adjacent to the insulation of stator windings and causes breakdown of the insulating materials. PD measurement can provide an idea of how widespread the PD activity is. A technique to measure and analyze PD that has become very popular over the last few decades is phase resolved PD patterns.

The catchphrase this project has been; the boundaries between ornamentation and improvisation are fluid.My aim was to focus on my work process, giving me the space and time so develop my design further regarding shape, color and combination of different styles in patterns.This is an explorative project where patterns were created without a predetermined product of which the patterns would be applied. In a later stage the character of the pattern determined which product that would be most suitable for application.It resulted in a collection of patterns for wallpaper and clothing. The motives are foxes, geometrical shapes and squares from a notebook. These motives form an ornamental expression in the patterns with the purpose of embellishment and therefore increase the emotional value of the product..

The energy consumption continues to increase as the use of electronics and energy consuming equipment increases. The use of fossil fuels has to be phased out for this to be sustainable in the long run while the use of renewable energy continues to increase. A renewable energy source is solar energy but the production of heat and electricity are today very expensive compared to other energy sources and an important task for the solar energy market to grow is therefore to minimize the production cost of the solar collectors while increasing its efficiency to produce heat and/or electricity. One way to convert solar energy into heat is by using solar collectors and electricity can be produced by utilizing the produced heat, or by applying solar cells.This thesis aims to recommend a reflective material for the next generation solar collectors from Absolicon and to recommend a commercially available coating for the receiver tube of the solar collector. A market study has been carried out to investigate the cost-related aspects along with the optical and durable aspects for the optical material of the solar collector.

Sverige är för tillfället operativa med Helikopter 16 - Black Hawk i Afghanistan. Uppgiften som löses i Afghanistan är främre och taktisk sjuktransport (MEDEVAC).Detta arbete handlar om hur befintliga VMS-system i helikoptrar kan kompletteras i syfte att möta ett föreliggande prickskyttehot vid lösande av främre MEDEVAC i ett insatsområde som miljömässigt liknar Afghanistan. I arbetet analyseras möjliga tekniker utifrån aspekter från ett konstruerat scenario där helikopterbesättningarnas uppgift, insatsmiljö samt hotbild beskrivs.Resultatet visar på att MEDEVAC-helikoptrar kan utrustas med sensor-gimbaler där olika sensorer kan kombineras, vilket möjliggör spaning i 360°. Detta bidrar till den militära nyttan då helikopterpersonalens lösande av uppgift effektiviseras, chansen till överlevnad ökar samtidigt som personal och patienter kan känna sig tryggare..