The  construction  industry  is  a  costly  business  such  in  respect  of  capital  for  most construction defects which then require rework, tear down and rebuild again. This study is  meaningful  awareness  of  tools  that  can  reduce  this  best  through  communication  and information sharing between the parties.  The  construction  industry  is  known  as  temporary  projects  organizations,  where  the construction  project  consists  of  several  actors  who  have  to  communicate  and  share information  between  them  to  avoid  mistakes  later  in  the  build  time.  These  actors  are bounded together thus for the duration of the project, then broken when the project has reached its end. The challenge here is for these actors to apply a tool that can help and simplify communications, information sharing, and perhaps the most important aspect is to  create  a  routine  for  the  association  and  the  shattering  of  these  actors.  To  implement such  behavior  using  a  tool  such  as  BIM  in  the  industry  whose  size  perhaps  is indescribable may be a very hard task.  BIM (Building Information Model) could be seen as the solution to this problem because it  acts  as  a  portal  where  the  actors  involved  must  sign  in  and  communicate,  share information, and eventually create a behavior, a routine for this association and division of  the  actors  following  the  end  of  the  project.  The  technology  could  help  the  involved from  the  beginning  of  the  project,  already  in  the  model  stage,  break  down  and  prevent any construction barriers when the building has been placed in the works.

?Entity continuity? refers to recurrent transcendent experiences related to certain places (?hauntings?). The experiences are often interpreted to be due to discarnate spirits or folklore entities. Although the entity continuity experience can be regarded as religious experience, they have yet to be fully explored in science of religion.The purpose of this paper was to describe entity continuity experiences and map out the scientific discussion in order to provide a psychology of religion that provides an understanding of the phenomena. For this purpose a literature study of theories of jungian psychology, parapsychology, and described experiences was undertaken.

Modern sawmills are using the raw-material and the production-capacity more efficiently today, due to rising raw-material prices and higher production costs. Log sweepness has a negative effect on the sawn yield, for sawmills with straight-sawing. It is desirable that these logs could be sorted based on more criteria, if it increases value-yield and consequently the utilization of raw-material. Bow-heights over 1 cm have a negative effect on sawn yield, since the surface of the mantle cuts down in the sawn pattern. Some of these small bow-heights reduce the logs yield of value which affects the production planning negatively. Nearly half of all the Swedish logs have a bow-height over 1 cm.

The purpose of this literature study was to describe techniques for monitoring general anesthesia and standing chemical restraint in the horse. A number of various techniques and devices related to e.g. blood pressure measurement, blood gas analysis and pulse oximetry are defined, and finally their clinical relevance and reliability are discussed. The equine patient is generally far more exposed to anesthesia-related risks than other smaller species. Complications such as hypotension and hypercapnia are commonly seen during general anesthesia. Thus, close monitoring is essentially performed by the veterinary nurse, whom is responsible for monitoring the anesthetized patient.

Background: Coronary heart disease kills more than 7 million people worldwide each year. High levels of blood fat, cholesterol, contributes significantly to coronary heart disease. Lifestyle changes combined with lipid-lowering drugs, statins, is an effective treatment. But adherence to statins is low, not even a myocardial infarction always contributes to adherence. Adherence requires patient education and good communication between patient and physician.

Road safety is the result of measures to reduce therisk of accident and injury. (Nationalencyklopedin,2008). In principle, road safety means to arrive saveand sound.Safe traffic in cities is mainly achieved throughappropriate speed. In Sweden, more than half ofall rides happen with a speed above the legal speedlimit (Holmberg, Hydén m.fl, 1996). To reducespeed in order to increase safety requires measureswhich influence a driver?s motives for his orher choice of speed even if these are not rational(Boverket, 2002).

Road safety is the result of measures to reduce therisk of accident and injury. (Nationalencyklopedin,2008). In principle, road safety means to arrive saveand sound.Safe traffic in cities is mainly achieved throughappropriate speed. In Sweden, more than half ofall rides happen with a speed above the legal speedlimit (Holmberg, Hydén m.fl, 1996). To reducespeed in order to increase safety requires measureswhich influence a driver?s motives for his orher choice of speed even if these are not rational(Boverket, 2002).

The development of software was considered until the beginning of the 1990th as a cathedral like product development in closed companies. This way of development changed in the last decade. Open source software (OSS) development challenged this consideration significantly. OSS is produced in co-operation by skilled people, distributed and used by many moral agents. The result, the software itself, can be studied and modified.

The choice between bare-rooted and containerized seedlings in southern Sweden affects the investment costs as well as growth and survival. It is important to take these differences into account when choosing seedling type for reforestation. The most important differences between the two seedling-types is that bare-rooted seedlings has open root systems whereas the roots of containerized seedlings are grown in a container which may contain water and nutrients that are available for the seedling during the first period after planting. Moreover, bare-rooted seedlings are often older which results in thicker stembase and better resistance to attacks of pine-weevil (Hylobius abietis). In order to study differences in survival and growth between bare-rooted and containerized seedlings a survey study of newly planted clearcuts in south-western Sweden was made. In the study tree seedling types was included, one bare-rooted and two containerized with different ages. The population of pine weevils was probably low during the studied period which resulted in lower pine-weevil damage than normally found in this area.

The third most common conifer in Sweden is Pinus contorta (lodgepole pine). It originates from the western part of North America and was brought here in the end of the 1920s. The lodgepole pine is today allowed for commercial plantations in central and northern Sweden, excluding high altitude locations. Since 1979 only plantations with scientific purpose are allowed in south-central and south Sweden. This document is focused on how lodgepole pine manage perform compared with Pinus sylvestris (Scots pine) in the southernmost part of Sweden, Götaland. The idea came from the fact that the Swedish government is evaluating a notification from the National Forest Agency that suggests lodgepole pine to be allowed for commercial plantation even in southern Sweden.

Denna rapport är en jämförande studie av utvalda konsolidanter som används till att stabilisera nedbrutet insektsangripet trä. Av de trägnagande skadeinsekter vi har i Sverige är det främst den strimmiga trägnagaren som är intressant i möbelsammanhang. I rapporten beskrivs den strimmiga trägnagaren, en liten skadeinsekt som kan åstadkomma stor skada om den får verka ostörd. Insekten finns utspridd i hela Europa och är ett stort problem då den angriper alla typer av träslag. Nedbrutet insektsangripet trä förlorar sin styrka och kan behöva konsolideras genom att injicera konsolidanter in i träet.

AbstractTitle:The Mediator?s Qualities - How are the negotiating parties effected by themediator's persistence and patience?Level:Final assignment for Bachelor DegreeAuthor:Johanna Strandberg and Emma HjalmarssonSupervisor:Jens Eklinder Frick and Jonas MolinDate:May 2015Aim:Our aim is to create a greater understanding of the negotiating parties'experience of the mediator's persistence and patience.Method:We have chosen a deductive approach that we have based our empirical dataon already existing research. Theoretical material has been gathered throughliterature, theses and scientific articles. With the background to our aim, we havechosen to use a qualitative approach where we have interviewed ten people who havebeen in contact with a real estate agent the last 24 months. The empirical data wasthen analysed and discussed in our analysis and conclusion.Result & Conclusions:We have found that the mediator's persistence and patienceaffect negotiating partners in various ways.

Title: A Business Perspective on Reducing the Climate Impact from Tetra Paks Transportations of Goods. Authors: Pär BerglundSebastian Lyngström Supervisors: Lars J Nilsson, Environmental and Energy Systems, Lund UniversityNils Månsson, Department of Business Administration, Lund University Problem Analysis: Increased awareness concerning climate change will put pressure on companies to reduce their climate impact. Problems arise when trying to reduce the impact from transportations due to companies? limited control on forwarding agents and difficulties measuring the emissions. Purpose: From a business perspective, this report will enable a reduction of the climate impact that arises from Tetra Paks transportation of goods.

This Master?s Thesis aims to investigate and assess the methods used to decrease the discharge ofmetals, primarily copper, from the water purification plant at Assa Industries plating factory inEskilstuna.Literature studies of the purification methods precipitation, ion exchange, evaporation, reverseosmosis and electrolysis has been done to appraise the adequacy of the technique. Thesetechniques are commonly used for purification of industrial waste water.Assa has four plating lines: the Trumline, the big Zinkline, the new Zinkline and the Decorativeline. The new Zinkline is the most modern of the four lines and purification is done byrecirculation over an ion exchange unit. The demand for fresh water is thereby heavily reduced.The Trumline, the big Zinkline and the Decorative line all use older techniques.

Return handling is often regarded as a slow and complex process. Studies have shown that it is not unusual for a return to cost up to nine times as much as a standard outbound delivery. An efficient return handling process is therefore essential to all competitive companies dealing with logistics. This report investigates, analyzes and gives suggestions on development with the purpose to improve the return handling process at LensLogistics AB in Kista, north of Stockholm, Sweden. The study has been conducted from a deliberately practical point of view in order to suggest improvement suggestions possible to implement and thereby change the entire return handling process.