The energy use in a workshop company has been examined in this work in order to find areas for energy efficiency improvement. The combined oil and electricity heating in the company were compared with other alternative heating systems including cooling of the premises in following combinations:Ground source heat pump for heating and coolingDistrict heating and absorption coolingDistrict heating and low temperate surface water coolingEnergy use, operation costs and carbon dioxide emissions were calculated for the current heating systems and the three alternatives including cooling. The ground source heat pump for heating and cooling decreases bought energy with 34 MWh annually compared to current heating only. The district heating and low temperate surface water cooling has the largest reduction of operation cost and carbon dioxide. The operation cost decreases with 42 kSEK and the carbon dioxide with 43 metric ton CO2 annually.

This paper describes the process of producing avatars for Jiddr. Today, social media surrounds the lives of youth, and communication via the Internet is an everyday occurrence for most people. Jiddr is an app that was created to give youths a platform for engaging with adults and other youths. It is a moderated forum which gives young people the opportunity to come i contact with adult role models who are knowledgable within various subject areas. On Jiddr, users are anonymous, and this is something I have placed much importance on during the design process.

Industrial buildings are increasing all over Sweden. Farmers are building new modern facilities and the government chooses to build new halls to invest i youth sports. Glulam is the most common framework but there are limitations because of the transport. Therefore, there is a need to develop new solutions to increase the use of glulam.The maximum torque in the eaves was found in the frame with a roof pitch of 18 degrees and a wingspan of 25 meters. Using hand calculations according to Eurocode and comparison with the computer software StatCon, the maximum torque, shear force and utilization rate is calculated.

This study is about what teachers in primary schools say that they are doing to create a school for all.The purpose of this study is to find out what teachers in primary schools say that they do on their mission to create a school for everyone and how they organize teaching to achieve this. The study was conducted as an interview of five teachers from elementary school of different gender and with a qualitative method because it provides a great opportunity to problematize, interpret and understand the responses of the interviewees.The results show that all the teachers think that their mission is to teach so that they can give each student what they need to achieve the goals. This may not be every day but over time, they hope that all students feel that they get so much of the teacher's time that they need..

The purpose of the house which is the basis of this report is to be able present itself on the market as a relatively cheap and at the same time a climate friendly choice. The house is supposed to be able to be built anywhere in Sweden and the rest of Scandinavia in a short period of time. This puts demand on what kind of heating system the house can have, since not all places have the geographic advantage of being able to use geothermal or district heating. Therefore the heating system choices will only include those that are not limited by their geographic location. The house will be built in modules which only require the groundwork to be done before the house can be erected. In this report "System solutions for plus or passive-housing" a comprehensive literature search has been conducted as well as a number of calculations.

This thesis describes the development ofa linear guidance system suited for NORCAN's aluminium profiles. The work took place at LP Innovation, a small technical consulting company, located in Uppsala. The work started with gathering and searching for information. A lot of the information was found in product catalogs, but my supervisor was also a great source of knowledge, as well as the other engineers at the company. I also had the opportunity to work with the rea lprofiles, to get a feeling and greater understanding how they were supposed to be used. With the use of sketching and CAD, a number of concepts were generated.

Our purpose has been to review and analyse the representation of rape, as well as discussions concerning rehabilitation, present in texts targeted at professionals and/or female victims of rape. We wish to investigate whether female victims of rape themselves are given the opportunity of individual positioning with regard to the crimes they have been exposed to. We consider it to be of relevance that female victims of rape themselves are given the opportunity to act, react and feel individually in the context in which they find themselves, without judgement or certain expectations on how to act being dealt to them from their surroundings. Our research questions have been as follows; what views of the phenomenon that is rape are presented in the texts? Do the texts apply any specific theoretical analysis aimed at the possible explanations of the phenomenon that is rape? In what ways do the texts present the significance of rape for the female rape victim? How are the victims feelings of disgrace, guilt and disgust with regard to rape explained, are these reactions linked to the understanding of female sexuality? How are methods of the rehabilitation of female rape victims presented in the texts? Do the texts render possible any other/varying subject positions as a female rape victim? To answer these research questions we have applied a critical discourse analysis on our selection of texts and thereafter made a connection to relevant theory.

The idea with constructions made out of prefabricated elements is that it should be quick and easy to build as the demands for lower production costs, increased profitability and shorter production times are constantly increasing. High accuracy in measurements and well-balanced tolerances is required to achieve this. The fact that the concrete-elements doesn?t fit and that damage occurs during assembly is a highly topical issue even though we now have methods and systems that make this high-intensity construction possible. Through this report we want to highlight the problems that cause the dimensional and tolerance problems and give suggestions on how to come to terms with these.

The purpose of this paper is to investigate how organisations can keep their crisis preparedness alert although crises do not occur often. A crisis organisation will lay dormant within a larger organisation for long periods of time. This may cause a problem when a crisis does occur if the preparedness has not been kept alive.From previous researchers that we have studied within this field we have identified two distinct methods to do this. The first focuses on the importance of detailed crisis plans, while the other method suggests that it is more essential to develop specific competencies with the employees. We also find that keeping knowledge within an organisation is a matter of organisational learning and memory which we therefore discuss and analyse.We have performed an interview study at E.ON in Örebro, and we have also had the opportunity to read E.ON?s crisis plan.

Bachelor thesis, Controller, Program of Master of Science in Business and Economics, School of Business and Economics at Linneaus University in Växjö, Sweden, Course Code: 2FE13E:3, Spring 2012 Authors: Jacob Cedergren, Adam Pettersson, Hampus SkelterwijkSupervisor: Anders JerrelingTitle: The ERP-systems impact of the management control - a case study of VIDA AB Original Title: Affärssystemens påverkan på ekonomistyrningen - en fallstudie på VIDA ABBackground: New technology has given businesses new opportunities to use and store information and the current information systems has changed the way of working in more or less all sectors and operations. ERP-systems have been one of the most important IT innovations in the past decade. The potential of a properly implemented ERP-system is great because it has got the ability to link the company?s different areas together. Despite its many advantages, there are several examples of cases where the acquisition and implementation has been a total failure.

Due to recent legal enactments regarding carbon dioxide emissions, the car industry is facing higher demands. An effective way of reducing these emissions is to minimize the weight of the vehicle. This thesis constitutes a feasibility study on whether or not it is applicable for the car industry to utilize an inner floor structure comprising composite materials. The principal was the projectSåNätt, in which the main participant was Volvo Cars Corp. In consultation with a reference group, consisting of delegates from the industry and KTH, a specification of requirements was produced.

ABSTRACTThis project thesis has been written at the request of Mälardalens University, Västerås.The aeronautical engineering students at Mälardalens University and the pupils of Hässlö upper secondary school, all gets the opportunity to perform a computation lab with a real turbojet engine during their study. The goal of the lab from the University is that it should give the students applied experience from the theory part of which has been tought in the course ?Aircraft Engine Technology?.                      The pupils of the Hässlö upper secondary school are performing simpler calculations from the measured values of the equipment. This turbojet engine is located at Hässlö airport in the premises of Hässlö upper seconday school.Since the installation 1989, the engine has lost both thrust and reliability. This makes the theoretical computations made by the students inaccurate.

Background: In 2001 the European Commission presented legislation to require use of IASB standards named IAS/IFRS for all listed parent companies within the EU no later than 2005, to improve an internal market for financial services within the EU. This harmonisation of the accounting regulations answers to the social development of today with land-frontiers easier to cross, increased demands on an open financial market and the companies searching for risk capital outside the boundaries of the own country. International comparisons within accounting have consequently become more of current interest and necessary. When the requirement to use the IASB standards only is intended for the group accounting the remaining question is according to which regulations the parent companies will set up their annual financial reports. In Statens Offentliga Utredningar 2003:71(Swedish Government Official Reports) the parent companies are suggested to be given an opportunity to apply IAS/IFRS also in the annual financial report.

This thesis is an attempt to study computer games and playful computer programs for childrenand youth at Swedish public libraries. The main method used, is qualitative interviews.The main reason the libraries in the study offer computer games and playful computer programsto their users, is that every member of the society shall have opportunity to use newtechnology such as computers and computer programs. The users of this media are for themost part boys. The librarians in our study wish to have pedagogical games and programswithout violent themes at their libraries. Lending computer games and computer programs isnot of any priority for the libraries..

What on earth do people see in camping? Why do they choose this compact living in their holiday? All that people in caravans who are put together in a camp site.The purpose of my study was to find out who and wy. My ethnographic study in a camp site with participation observations, interviews and analysis have results in facts that show why.The most common camper is the house owner with average income. And the choice of the camp site depend on the security and the service that the camp site offered. The camp site was controlled and the campers controlled each other.