As emission legislations across the world continuously pushes engine development forward,engineers constantly need to come up with and implement fuel saving technologies. During thelast decade, variable cam phasing has become a popular solution to increase gas exchangeefficiency. This configuration is typically mechanically constrained by camshaft limitations, anda solution to circumvent this problem would be to use a different valve actuation principle.One example of this is to use pressurized air controlled by electrical solenoids. Such a systemhas been developed byCargine Engineering and this provides the starting point for this work. Tobe able to operate the valvetrain on an actual engine, a control system is needed.

By using steady-state measurements for predicting emissions under a dynamic drive cycle wouldsave a lot of time and money for the exhaust aftertreatment specialists at Volvo cars. The idea forthis thesis has been to investigate if statistical regression models can be used with good accuracy.Questions included are for example if common operating variables such as engine speed, air-fuelratio etc. is sufficient to predict engine-out emissions over the engine operating range with goodaccuracy. Focus was set on the modelling of warm engine, but also the more complex engineheat-up phase was investigated since it is a great contributor to total emissions. While NOxcouldnot be measured because of malfunctioning measurement equipment, only HC, CO andtemperature at inlet of first catalytic converter has been modelled.

Energy awareness is growing among the Swedish population and a one­?to­?two-family dwelling can save energy. The purpose of this paper is to design a tool that helps these home owners reduce their energy costs.The paper develops a model that gives them an indication of how much energy they can save. For the majority of homeowners, the next step in the quest to reduce theirs is most likely an energy audit. Therefore, information to help home owners to get a good energy audit performed is included in the model.A prototype running the operating system iOS is created and validated against existing models, as well as an energy audit. .

A titania-supported nickel catalyst was prepared and tested in methanation in order to evaluate its catalytic properties (activity, selectivity and specially, activity loss), and compare it with an alumina-supported nickel catalyst.The titania-supported catalyst did not only show higher stability than alumina, but also presented a different cause of deactivation, carbon formation. In addition, a kinetic model was obtained for the titania-supported catalyst, and a study of the effect of different operating conditions (temperature, composition and partial pressures of synthesis gas and water) on the deactivation rate and carbon formation of this catalyst was performed.

MPC is the company Exova Metech?s operating system that contains all the information needed for the company's objectives and guidelines to permeate the company. How changes in the MPC should be communicated with the company's employees can be seen as problematic. Routines that have been changed in practice, the process owners do not always update in the MPC, it leads to that the employees can not ensure that duties are performed properly. It is therefore important that management takes its responsibility by providing updated information.

This thesis has been done at the Unversity of Örebro for Örebro University Hospital (USÖ). In our work we have developed a product for hearing tests to determine hearing thresholds of small children. Our product contains software and a control surface for controlling two separate screens. One of the demands was that our software could handle big file libraries. Reliability and simplicity were essential for the user.In our work we have utilized programming of both microcontrollers and Windows software.

Abstract Title: Total Cost of Ownership ? Revealing the true cost of owning and operating equipment. Authors: Anna Bladh Anna Ström Tutors: Michaela Boye, Parts and Service, PTD, Alfa Laval Göran Berg, Parts and Service, PTD, Alfa LavalCharlotta Johnsson, Department of Automatic Control, LTH, Lund UniversityBertil I. Nilsson, Department of Industrial Management and Logistics, LTH, Lund UniversityCarl-Henric Nilsson, Department of Business Administration, Lund University Core issue: ?Which costs should be included in a general Total Cost of Ownership model regarding centrifuges, and what input variables are needed in order to calculate those costs in a user-friendly way and with a maintained level of accuracy?? Purpose: The theoretical purpose of the thesis is to identify the cost items that have the greatest impact on a TCO calculation for a centrifuge.

China is one of the fastest growing markets of today and attracts billions of dollars in foreign direct investments. Swedish companies have not been late to follow and operate on the Chinese market driven by opportunities in sales, production, and sourcing. However, there has been limited research made on how and why Swedish companies extend their sourcing efforts in China. By combining research within the internationalization of export activities, concepts from global sourcing, and gathered empirical data from leading Swedish companies operating in China, the thesis develops a framework for analyzing the internationalization process of sourcing in China..

The agriculture is today in a development that leads to bigger and bigger units in the primary production. To be able to follow this development many companies chooses to cooperate in different ways. The most radical change is when farmers fuses with other farmers and merge into to a big collectively owned operation firm. The reason behind this idea is that the firms achieve the big companies advantages by being complement to each other. The purpose of this essay is to make an economic analysis of two crop production companies who works together in an operation firm.

Applications for mobile devices, also known as apps, are today the backbone of a huge market where the company Apple is one of the key players. Apple develops, among other things, handheld electronic devices, which are powered by the operating system iOS. Through iOS, millions of customers get access to Apple?s App Store.During a period of two months, an app in the form of a game has been developed for iOS in the programming language Objective-C. The user of the app is presented intuitive menus and interactive graphical objects that seemingly obey physical laws.

This report details the development of an application for personal safety for the Android operating system. Android is a relatively new platform, primarily used on mobile phones.The purpose of the developed application is to give the user the possibility to easily and quickly alert a number of contacts by phone in case of emergencies, and to show the user?s location on a map. This is not only used during emergencies, but for other purposes as well ? for example to monitor a jogging round.The project was carried out in co-operation with the company D-Safety, the developer of the "SoftAlarm" ? the product on which the developed application is based..

A titania-supported nickel catalyst was prepared and tested in methanation in order to evaluate its catalytic properties (activity, selectivity and specially, activity loss), and compare it with an alumina-supported nickel catalyst.The titania-supported catalyst did not only show higher stability than alumina, but also presented a different cause of deactivation, carbon formation. In addition, a kinetic model was obtained for the titania-supported catalyst, and a study of the effect of different operating conditions (temperature, composition and partial pressures of synthesis gas and water) on the deactivation rate and carbon formation of this catalyst was performed.

Warehouses are a key aspect of modern supply chains and play a vital role in the success or failure of businesses today. Figures from the USA indicate that the capital- and operating costs of warehouses represent about 22 % of a company?s logistics costs while figures from Europe indicate 25 % (Baker & Canessa, 2009). Because warehousing is such an important function within a company, the authors chose to focus on this in their thesis. The purpose of this thesis has been to examine the significance of a Warehouse Management System (WMS) and item identification with attention to logistic efficiency.

In Sweden we have a regulated gambling market which means that there are three gambling companies who are operating under the supervision of the Swedish state. These companies have exclusive rights to the Swedish market, divided between them. AB Svenska Spel is one of them and they control all gambling concerning sporting events and the four casinos in Stockholm, Gothenburg, Malmö and Sundsvall. However, since a few years back several Internet-based companies have entered the Swedish market and the competition has become even fiercer in the last years. Due to numerous marketing restrictions the Internet companies have been forced to find new ways to strengthen their brand.

The objective of this project was to develop an application for mobile phones using the Android operating system. The main goal was, with the help of GPS, to pinpoint locations, measure distance traveled and illustrate the progress on a map. Functionalities for just showing the map, fetching addresses and saving to a database was also implemented. The result of the work was a proper application, called MeasureApp, that fulfills the goals set in the planning stages of the project. MeasureApp can be used to measure distances where accuracy is not a main factor, i.e walks or runs.