Open source software has recently been discussed, not least in media as a revolution in IT. A number of advantages have been listed in changing proprietary software into open source software. Examples of such pros are no expenses for license fees and improved efficiency. In spite of this, few users have made this change. One of the reasons is a distrust of the quality in open source software.

This thesis has been done at the powder department (GH) at AB Sandvik Coromant in Gimo. With a rheometer measurements has been made on raw materials and powder blends. The focus of this report has been to find correlations between raw material powders and press data, comparisons have also been made between raw materials and powder blends.The rheometer can show information of how a powder act in flow conditions, together with air and with pressure. Analyses has been done comparing the rheometer data with press parameters (for example: rejected orders, weight variations and the compaction pressure) with the goal to find correlations between the powders flow properties and the powders compaction in production.The measurements and analyses have been showing that the powder flow properties depends on the powders composition and that properties like flow rate, aeration and permeability varies between powder blends and batches of the same powder sort. It seems to exist a correlation between the pressure force and the flow rate of a raw material.

Dennauppsatsärallmänochoffentlighandling.Författarenharupphovsrättenochuppsatsenfårintebegagnasannatänförenskiltbrukutanförfattarenstillstånd..

This Masters thesis work describes a comparison between two different methods for estimation of the down channel (base station to mobile subscriber) in Wide-band Code Division Multiple Access (WCDMA). The first estimation method, Optimal Feed-forward Channel Estimation (OFCE), is a conventional method that bases the estimates on data that is known to both sender and receiver, so called pilots. The second method, Decision Directed Channel Estimation (DDCE), is an elaboration of OFCE. It also uses user data for estimation. Simulations show that DDCE, in comparison to OFCE, does not attain an improvement in signal-to-noise-ratio (SNR) for high bit error rates (BER).

This thesis has been done at the powder department (GH) at AB Sandvik Coromant in Gimo. With a rheometer measurements has been made on raw materials and powder blends. The focus of this report has been to find correlations between raw material powders and press data, comparisons have also been made between raw materials and powder blends.The rheometer can show information of how a powder act in flow conditions, together with air and with pressure. Analyses has been done comparing the rheometer data with press parameters (for example: rejected orders, weight variations and the compaction pressure) with the goal to find correlations between the powders flow properties and the powders compaction in production.The measurements and analyses have been showing that the powder flow properties depends on the powders composition and that properties like flow rate, aeration and permeability varies between powder blends and batches of the same powder sort. It seems to exist a correlation between the pressure force and the flow rate of a raw material.

A good flow of information in organizations is one of the key aspects of how we define a well-functioning organization. The information flow could be internal as well as external between actors within as well as outside of the organization. In a logistics organization this flow of information is equally important as in any other kind of organization. In this paper we have explored information flows in logistics organizations by applying, boundary spanning and the mobile-stationary divide perspective. In boundary spanning the main goal is to erase or relocate some of the boundaries within an organization, in our case to make the flow of information internally as well as externally better.

A good flow of information in organizations is one of the key aspects of how we define a well-functioning organization. The information flow could be internal as well as external between actors within as well as outside of the organization. In a logistics organization this flow of information is equally important as in any other kind of organization. In this paper we have explored information flows in logistics organizations by applying, boundary spanning and the mobile-stationary divide perspective. In boundary spanning the main goal is to erase or relocate some of the boundaries within an organization, in our case to make the flow of information internally as well as externally better.

At Forsmarks Kraftgrupp AB (FKA) forces on pipe systems due to transient flow are frequently calculated as a step to verify their structural integrity. In nuclear industries these forces are often calculated with a one dimensional thermal-hydraulic analysis-code called RELAP5. When calculations regarding more complex geometries are needed, the three dimensional code Fluent is often used. This code is highly time consuming and requires large computational power.This projects aim is to compare calculations of pressure, flow and forces carried out by RELAP5 and Fluent for an arbitrary pipe section during transient flow conditions. This has been accomplished by constructing a simple geometry for which a transient flow is simulated in both programs.

I denna rapport predikteras livslängden, med avseende på utmattning, för en hjullastarskopa. Två av de mest kritiska svetsarna utvärderas enligt IIW:s (International Institute of Welding) rekommendationer genom nominella spänningsmetoden, hot spot-metoden och effective notch-metoden. Beräkningarna utförs med hjälp av finita elementmetoden. Genom att utföra töjningsmätningar på hjullastarskopan i drift erhålls spänningsdiagram. Dessa uppmätta spänningsdiagram analyseras med rain-flow count-metoden.

The thesis work has been carried out at Volvo Aero Corporation (VAC) in Trollhättan. VAC has entered a partnership as developing and producing partner with engine manufacturer Pratt & Whitney and is currently at the starting phase of producing the turbine rear frame (TEC) to the engine PW1000.The purpose of this study was to create a report on process level that describes the conditions and the potential with PW1000 TEC to reach the product cost calculation taking into account lead times and describe alternative method solutions.The report describes a comparison between the present flow (2012), a flow based on product cost calculation (2016) and a potential flow (2016). The work has mainly been based on acquiring the knowledge and information available to inspect the present flow; this has been done by workshop observations, meetings and gathering of the information that is available on the work site for the PW1000 TEC.The information obtained has been merged into an Excel document, called Roadmap. It serves as a roadmap with current situation as the start and the potential flow for 2016 as the goal. With the roadmap as a tool, assumptions have been taken considering the flow and how it will change, where processes have been eliminated, reduced or marked as a problem..

A good flow of information in organizations is one of the key aspects of how we define a well-functioning organization. The information flow could be internal as well as external between actors within as well as outside of the organization. In a logistics organization this flow of information is equally important as in any other kind of organization. In this paper we have explored information flows in logistics organizations by applying, boundary spanning and the mobile-stationary divide perspective. In boundary spanning the main goal is to erase or relocate some of the boundaries within an organization, in our case to make the flow of information internally as well as externally better.

This Masters thesis work describes a comparison between two different methods for estimation of the down channel (base station to mobile subscriber) in Wide-band Code Division Multiple Access (WCDMA). The first estimation method, Optimal Feed-forward Channel Estimation (OFCE), is a conventional method that bases the estimates on data that is known to both sender and receiver, so called pilots. The second method, Decision Directed Channel Estimation (DDCE), is an elaboration of OFCE. It also uses user data for estimation. Simulations show that DDCE, in comparison to OFCE, does not attain an improvement in signal-to-noise-ratio (SNR) for high bit error rates (BER).

Sun Microsystems chose its own Open Source path by not following competitors in their commitment toGNU/Linux. Sun instead created its own Open Source project from the source of Solaris under the name ofOpenSolaris. The business model of OpenSolaris belongs to the new and more commercially viable OpenSource, referred to as OSSg2. This survey was based on articles on the adoption of Open Source in organizationsand István Orci?s publication Kritiska IT-System.

Most of the saw and pulp industries have stored wood nearby their production, the main reason is to have a continuous wood flow to the production. Wet storage of wood is of great importance to keep the wood quality. Without water sprinkling the risk of drying outand decomposition through biological activity increases significantly and will result in a negative effect on future production and quality. One drawback of wet storage of wood is the leaching of chemical substances into the surrounding recipient. The log yard run-off contains phosphorus, nitrogen, phenols and organic substances. These substances can cause problems for the surrounding environment. The main objective of this project is to gain an understanding of the wet storage used by the Swedish wood industry and estimate the environmental consequences that run-off water will have on the recipient.

Today?s media consumption and viewing behavior has led to an expansion in the marketand resulted in a media convergence. The competition gets fiercer with each player andthe outcome for the linear TV channels has to be to change in some way. This is aqualitative interview study with producers at Sweden?s leading children channel?Barnkanalen?, how they experience the adoption to this new media landscape.