Emwiro Vibe is a complete system for seismic measurements. The functionality of the system was before the completion of this project handled using a software contruction based on a state machine. Emwitech, the company developing Emwiro Vibe, expressed a desire to replace this solution with a real-time operating system (RTOS). The project consisted of two parts. Firstly the existing software was studied, available RTOSes was evaluated, and the RTOS most suitable for the application was selected.

Emwiro Vibe is a complete system for seismic measurements. The functionality of the system was before the completion of this project handled using a software contruction based on a state machine. Emwitech, the company developing Emwiro Vibe, expressed a desire to replace this solution with a real-time operating system (RTOS). The project consisted of two parts. Firstly the existing software was studied, available RTOSes was evaluated, and the RTOS most suitable for the application was selected.

The purpose of this project was to study how the interference between two antennas in a MIMO system affects the linearity of the power amplifiers powering the antennas. For the MIMO system, two power amplifiers and twoantennas were constructed and designed using the software ADS and a software defined radio was constructed using the platform USRP and the software LabVIEW. The result was that the interference between the antennas affectsthe linearity of the power amplifiers powering the antennas adversely and a reasonable theory was that the interaction decreases inversely proportional tothe square of the distance..

As the speed and complexity of computers have increased so have software and the expectations of users. Software development follows a straightforward evolution where complicated tasks are made easier by better tools; this repeats itself as those tasks in turn are automated.Software mechanics that were seen as revolutionary a decade ago are seen as obvious requirements that no multimedia application can be without.dotNet is the next step in line and makes it easier and faster to build software.This report focuses on the development of a multimedia platform developed in dotNet. It does this by developing the tools and framework from which a complete game can be built.A game is selected because it combines the most aspects of multimedia development, such as interaction, graphics, sound & music. The report goes further by describing why the game looks like it does as well as the mechanics of the game and the benefits of the dotNet platform..

Title: A hosting service for software development projects that use the Git revision control system. To learn using tools to make software development more effective should be self-evident at a high level institution as the competitive industry races on. The absence of directives for programming students in Sweden to use source code management (SCM) was the basis for this report. The report describing the developing of a hosting service for software development to use SCM of Git, which includes a web application, storage, API and authentication of students. The project resulted in a hosting service and a smaller survey of how the today Swedish students using habits of SCM during their studies..

In order to reduce the price for, and improve the performance of automatic control systems for magnetization of synchronus generators, the possibilities of using a PC based software PLC system, Programmable Logic Controller, has been investigated. The result is a system based on the CoDeSys software PLC with runtime environment from 3S-Software, communicating with external units via Modbus fieldbus. System price is reduced from ?5000 to ?2000 and system processing speed is reduced from 10 ms for a Siemens S7 PLC to 4 ms with the CoDeSys PLC system though unsolved problems with runtime seizure caused by improper settings in the PC BIOS..

Antalet programvaror ökar för varje dag och människor använder dagligen en mängd olika sorters programvara både på datorer och på andra enheter. Det finns idag programvara som kallas för fri och öppen programvara som tar upp kampen med gamla klassiska proprietära programvaror. Öppna och fria programvaror släpper sin källkod helt fri så användaren själv har möjlighet att göra ändringar i den programvara som används medan proprietär programvaras källkod är skyddad och hemlig. Dessa tre olika sorters programvaror jämförs och diskuteras utifrån tekniska likheter och skillnader i denna kandidatuppsats. Syftet med denna kandidatuppsats inom informatik är att undersöka vad privatpersoner som är tekniskt intresserade har för tankar och attityder kring proprietär, öppen och fri programvara och visa vilka tekniska aspekter som prioriteras vid val mellan dem. I undersökningen har ett kvantitativt angreppssätt bestående av en webbenkät som besvarats av privatpersoner tillämpats. Resultatet från denna enkät har tillsammans med den teori som insamlats visat vilka tekniska funktioner och skillnader som påverkar en privatperson då val av olika sorters programvara ska ske. Undersökningen har visat att det som användaren prioriterar högst i en programvara är användbarheten som handlar om hur användarvänligt användargränssnittet är och hur lättanvänd en programvara är.

Dennauppsatsärallmänochoffentlighandling.Författarenharupphovsrättenochuppsatsenfårintebegagnasannatänförenskiltbrukutanförfattarenstillstånd..

The Mission at ÅF Industry in Norrkoping was about optimizing bulk data handling while importing process tag types from their construction database into the Process Controlled System of type Siemens PCS7.I found three different methods to solve the task. Two of them were using different software from Siemens under the premise that the report from the database was corrected as needed. The third variant was manually creating the circuits. All methods worked out fine but there were times when one was better than another.To solve this task I had access to all software presented in chapter 2 ?Programvara? (=Software).

At the Department of Technology and Built environment at the University of Gävle there was an interest to study GNU Radio, which is an "open source radio project. The project is based on that most of the radio signal processing is made in an ordinary PC. The idea behind this degree project was that in a laptop there are several radio transmitters/receivers that takes space, generates heat and transmit in varied frequency band etcetera. All these radio transmitters/receivers could be replaced with a Software Defined Radio system. It means that one common, general radio hardware is used to different communications such as: WLAN, Bluetooth, GPRS, 3G etcetera. The waveform is generated in the software, which makes the system very flexible.

This piece of work develops a solution that automates protection against software keystroke loggers. Keystroke loggers can be used illegally to register a user's keystrokes and in that way acquire sensitive information. The solution was tested on two different networks and the efficiency was measured. The network represents an enterprise network that uses the operating system Windows along with the directory service Active Directory. A script was developed to solve the automation matter.

This study is based on the development of a new software, which is used as a recommendationtool for selecting the best product. As part of the software development has an external partnerbeen asked to assist. The report will process the expectations that different people have on anew project but also how information is communicated to an external partner.The results from this study show that a software's function is closely linked to its usability.Therefore shall usability been taken into account when a new resource is created. The study alsoshows the importance of being able to share information, on how the program will beconstituted, to someone outside the organization..

The Uppsala based company Q-linea develops procedures, instruments and systems for protein and nucleic acid analysis. The components in such an instrument are controlled by microcontrollers. Microcontrollers are computers in one singular chip that can be used in a wide range of applications such as cars, toys or in this case an analysis instrument. When developing a new instrument for biochemical analysis, Q-linea needed new software for controlling and communicating between the components in the instrument. The process of developing this software is the subject of this thesis.The project included research of microcontrollers and the components in the instrument.

This thesis deals with the compatibility between analysis software Revit Structure2012 and Robot Structural Analysis 2012. The purpose is to become more aware ofinformation management models to be compatible across different softwareapplications. The structural model is made to be optimal for the compatibility of othersoftware Aim is also to gain an understanding of the transferring methods that exist,and which method is most convenient to use and to examine whether the methodswork in practice. Objective of this project is to make the modeling processtime-efficient for constructors. Models do not need to be structured in severaloccasions in different software; it only needs an optimal model that transfers properlybetween software.The method used in the thesis consist cases where the transferring process isexamined.

Chunks and Tasks is a programming model based on the C ++ programming language. This programming model is used for electronic structure calculations, among other things.The purpose of this project is to improve the CHT-MPI software library for Chunks and tasks, so that calculations of matrix-matrix multiplications are performed more efficiently than they do with the existing software library. The software library is based on the work stealing method, which is a method the software library for Chunks and Tasks uses for the distribution of the calculation work. The considered way to improve the software library is by modifying the work stealing method in a way that makes the distribution of calculation work happen in a more efficient way , which will lead to calculations performed faster than before.Two different modifications of the work stealing method were tested and it led to two new methods, Method 1 and Method 2, which distributed the calculation work differently. Method 1 did not give results that were compatible with the theory, since the calculation time with this method was much longer than the previous method.