Målet med detta examensarbete, utfört på uppdrag av Vectura Consulting AB, har varit att undersöka möjligheten att ansluta en vindkraftpark till järnvägens kontaktledningsnät. Möjligheten att koppla om vindkraftparken till järnvägens hjälpkraftnät, som bland annat förser växelvärmare och signalsystem med effekt, har också undersökts. Eftersom kontaktledningsnätet och hjälpkraftnätet arbetar med olika frekvenser och spänningar, 16? Hz och 15 kV respektive 50 Hz och 22 kV, måste därför en komplett krets för frekvensomvandling, spänningsomvandling och omkoppling tas fram. Projektet har begränsats till en del av Botniabanan, sträckan Örnsköldsvik-Nordmaling.I denna rapport har trafikfrekvensen på den valda sträckan på Botniabanan undersökts för att bestämma en genererad effekt till inkopplingspunkten, samt för att undersöka när det kan vara lämpligt att koppla om till hjälpkraftnätet.

SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.

This master thesis comprises analysis and dimensioning of a keyed joint between a generator axis and a hub with aid from the FEM-software ANSYS Workbench 13.0.The generator axis is a part of a hydroelectric power station that generates electricity with a reactions turbine, a Kaplan turbine. The existing keyway consists of one parallel key with the width 90 mm and height 45 mm. Due to a planned increase of the power of the generated power with 32 % a design study was needed to see if the keyed joint would be suitable for the extra force. Because of the fact that the axis diameter is bigger than the standards covers/recommends a the keyway had to be re-dimensioned. In an earlier assignment from Skellefteå Kraft AB to Sweco Energuide the keyway was planned to be properly dimensioned, but no final solution was approved.During this master thesis a number of different numerical tests were made.

AbstractTitle: The New Type of Music Industry at AllEars.se (Den nya musikbranschen på AllEars.se)Number of pages: 49 (53 including enclosures)Author: Viktor BackemarTutor: Else NygrenCourse: Media och Communication Studies CPeriod: Fall 2007University: Division of Media and Communication, Department of Information Science, Uppsala University.Purpose: The purpose of this paper is to compare AllEars´ own view of the website AllEars.se to an observed view of the same site. The comparison is based on theories regarding the Internet in today?s society, convergence, communities and collective intelligence, interactivity and participation, and business in today?s society.Method: Since the paper has a purpose to compare two views of the same website there are two main methods in use. AllEars´ own view has been created via an interview with the company?s CEO, a press release that was released in connection with the launch of the website and texts found on the website.

In order to fully grasp the phenomena 'City' we must understand its political structure as an integrated part of its physical structure and vice versa. This thesis focuses on one crucial element of the City, the public space, and discusses it in relation to the public realm, or sphere, of the City. The aim is to see if it is possible to conceive public space as a spatial dimension of power, and if so, how to analyse this. With the help of the theoretical tool of two ideal types of the configuration of public space, "The city as civic public life" and "The city as authoritarian control" an empirical study is carried out on the case of Prishtina, capital of Kosovo.Conclusions made are that function and use of a city's public spaces can be understood in relation to changes in the political climate of the society. Furthermore, a void in the asset of concepts offered by the ideal types is found ? and therefore also need for new concepts to describe and understand a public space undergoing a dynamic transformation, as being a part of a city in political transition..

This candidate thesis contains the possibility of expand the Swedish photovoltaic market through photovoltaic cooperatives and a photovoltaic exchange. In the current situation there is a lot of problems with production of electricity from photovoltaic, that?s why we show some possibilities how to avoid these. To understand the problem with photovoltaic produced electricity we first give you a background.We show how to expand the Swedish photovoltaic market by describing how a photovoltaic cooperative and photovoltaic exchange could work in Sweden. It have been confirmed from our market research that the interest of photovoltaic cooperative and exchange is high.To find out how profitable photovoltaic is in Sweden, have three projections been made.

SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.

SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.

This master thesis comprises analysis and dimensioning of a keyed joint between a generator axis and a hub with aid from the FEM-software ANSYS Workbench 13.0.The generator axis is a part of a hydroelectric power station that generates electricity with a reactions turbine, a Kaplan turbine. The existing keyway consists of one parallel key with the width 90 mm and height 45 mm. Due to a planned increase of the power of the generated power with 32 % a design study was needed to see if the keyed joint would be suitable for the extra force. Because of the fact that the axis diameter is bigger than the standards covers/recommends a the keyway had to be re-dimensioned. In an earlier assignment from Skellefteå Kraft AB to Sweco Energuide the keyway was planned to be properly dimensioned, but no final solution was approved.During this master thesis a number of different numerical tests were made.

Målet med detta examensarbete, utfört på uppdrag av Vectura Consulting AB, har varit att undersöka möjligheten att ansluta en vindkraftpark till järnvägens kontaktledningsnät. Möjligheten att koppla om vindkraftparken till järnvägens hjälpkraftnät, som bland annat förser växelvärmare och signalsystem med effekt, har också undersökts. Eftersom kontaktledningsnätet och hjälpkraftnätet arbetar med olika frekvenser och spänningar, 16? Hz och 15 kV respektive 50 Hz och 22 kV, måste därför en komplett krets för frekvensomvandling, spänningsomvandling och omkoppling tas fram. Projektet har begränsats till en del av Botniabanan, sträckan Örnsköldsvik-Nordmaling.I denna rapport har trafikfrekvensen på den valda sträckan på Botniabanan undersökts för att bestämma en genererad effekt till inkopplingspunkten, samt för att undersöka när det kan vara lämpligt att koppla om till hjälpkraftnätet.

Syfte och frågeställningarStudien genomfördes med syftet att specificera vilken intensitet och duration vid uppvärmning som är optimal för att få ut största möjliga effekt vid anaerob prestation i form av maximalt vertikalhopp och fem sekunders maximal cykelsprint. Studien byggde på tre frågeställningar: På vilket sätt påverkar uppvärmningen prestationen vid ett maximalt vertikalhopp? På vilket sätt påverkar uppvärmningen prestationen vid ett maximalt fem sekunders sprinttest? Vilken uppvärmning är optimal för maximal muskulär explosivitet?MetodDesignen var en kvantitativ experimentell studie som innefattade fyra fysiskt aktiva kvinnor med genomsnittsålder på 24 år. Testerna bestod av nio tillfällen där en slumpad uppvärmning på ergometercykel genomfördes varje gång. Därefter genomfördes tre vertikalhopp, så kallade counter movement jump, på en kraftplatta och tre fem-sekunders sprint (5sCST) på Monarks Peak Bike.

This degree project has been carried out by Oscar Adolfsson and Marcus Blomqvist, during the spring of 2010, both studying to become Bachelor of Science in Innovation and Design Engineering, at Karlstad University. The degree project includes 22,5 credits.The work is done on behalf of Etac Supply Center AB in Anderstorp. Etac is a company developing and manufacturing home health care products, with operation in Sweden, Norway, Denmark, England and Germany, and with sales worldwide. Bo Lindqvist, R & D manager has been the contact person at Etac.During the project the students has had a workplace at Semcon Caran AB in Karlstad. Semcon has also been helpful as a sounding board.The objective of the work has been developing a new, wall mounted shower chair, assigned for persons with difficulty to stand up while showering.Etacs requirement of the shower chair is that it should be able to support a user with a weight of 100 kg, the chair shouldn?t have any outrigger, optional should be armrests and backrest.

The constant need of energy is something that affects us all no matter our current situation. Whether we are driving our car to work, taking the elevator or using the oven to cook dinner we end up relying on energy. Our whole society is continuously striving to achieve a higher grade of efficiency and the process of supplying ourselves with energy is no exception. The importance of appliances in our everyday life cannot be exaggerated and thus the importance of their high efficiency.Efficiency is already a keyword in the appliance industry with labels, stars and numbers helping us choosing the most suitable option for the task ahead. No matter how efficient appliances often use pure electricity as their energy source.

The following Bachelor?s thesis examines how three Swedish national newspapers (Dagens Nyheter, Svenska Dagbladet and Aftonbladet), which all represent different points on the ideological spectrum, portray victim and perpetrator in their representation of rape during the year 2011. The thesis examines the newspapers news, editorial pages and reports of rape. The study uses a quantitative approach with qualitative elements which has its foundation in the theory of social constructivism and priming theory. Political science can be studied from the perspective of power, and media has a central role of this power.

Projektarbete har blivit en vanlig arbetsform i organisationer. Alfa Laval är ett företag som utnyttjar projektarbete för att utveckla verksamheten. Projekten leder dock inte alltid till de resultat som förväntas. För att analysera denna diskrepans vill jag lyfta fram projektledarnas uppfattning om sin arbetssituation. Studiens syfte är att belysa och analysera villkor för projektledarnas kompetensutveckling inom ramen för OD Supplys verksamhet.