This study is a degree project in environmental engineering at Mälardalens university. Its purpose has been to perform a risk assessment on whether or not any contaminations are present in the soil at two properties in Köping. The assessment was to be done accordingly to a method that has been set up by The Swedish Environmental Protection Agency (Naturvårdsverket). The method for investigation of contaminated sites is called MIFO. MIFO consists of two stages.

Introduction: The number of hearing impairments in Sweden is increasing. The largest increase is seen in ages 25-44. There are reasons to believe that these impairments are noise induced. Leisure time noise is not controlled in the same manner that industrial noise is. An ongoing conflict between city council officials and rock club owners, musicians and music event organizers about sound levels at smaller live music clubs exceeding the national sound level restrictions created the need for an acoustic intervention project.

The purpose of the present study was to investigate the cow-level association between acute hoof lesions and the somatic milk cell count in dairy cattle. Cows from three loose-housed Swedish dairy herds were enrolled in the study if they had an acute hoof lesion treated by a veterinarian or professional hoof trimmer during the preceding year, according to farmer records. Studied lesions were sole ulcer, dermatitis, interdigital necrobacillosis and hoof abscess, in each case causing lameness. For each hoof-diseased cow, 0 to 3 healthy cows were included, matched with respect to herd, breed, parity and lactation stage. Cell counts were obtained from monthly test recordings from one month before to three months after the hoof-lesion diagnosis, and log-transformed.

År 2013 var den globala omsättningen för modeindustrin ca 76 tusen miljarder svenska kronor (Office of Textiles and Apparel, 2014). Bara i Sverige omsattes det 229 miljarder svenska kronor år 2012 inom denna sektor, en ökning på 11 % från föregående år (Tillväxtverket, 2014). Att modebranschen är under ständig utveckling och ökar i tillväxt kan man se då dessa siffror stiger varje år. Statistik från 2014 visar att trots denna ökning så överlever endast 47 % av nystartade modeföretag de tre första åren (Statistic Brain, 2014). Så hur lyckas man som modeföretag i early stage-fasen att med begränsade resurser stärka sitt varumärke och hålla sig kvar på marknaden? I denna studie berörs olika delar så som traditionell marknadsföring, okonventionell marknadsföring, branding samt transparens, där huvudfokus ligger på företag i early stage- fasen av sin uppstart.

In order for construction projects to be completed within the specified time limit while at the same time be financially sustainable it requires thorough preparation and an extensive planning. Most essential is the groundwork and the design that determines the project's progress. There are many aspects to consider in order to avoid inconveniences such as delay, litigation, unexpected cost etcetera. If mistakes are made in an early stage it is very likely that the error will follow the process and become an expensive correction cost towards the later part of the project. In other words, it is expensive to rectify defects later on.

People working with handling parcels in terminals are often victims of musculoskeletal injuries. This is largely due to the hazardous lifting of too many parcels which are too heavy and unsuitable work postures. The human body?s ability to lift and grasp objects is so outstanding that developing a device with the same capability is very difficult.The goal of the project has been to develop a technical device that will improve the handling of parcels with regard to ergonomics. The area of concern was the lifting of parcels between the conveyor belt and the cargo space of the freight car.

Galärvarvet är på många sätt en utmärkt plats för en ny och framträdande kulturbyggnad i Stockholm. Samtidigt utgöt operans komplexa och omfattande program en stor utmaning. I detta projekt löses konflikten mellan program och plats meddels en långsmal byggnad som bevarar naturvärden och rörelsemönster..

The aim with this master's thesis is to describe the work process with the graduation film Player, by a composers perspective and given conditions. It provides a detailed insight into how the work was done from the script stage to the end result, scene by scene reflecting about both the musical performance and the collaboration between the director and me as a composer. The work was done during the spring term of 2012 at the Royal College of Music in Stockholm and Stockholm Academy of Dramatic Arts..

The aim with this master's thesis is to describe the work process with the graduation film Player, by a composers perspective and given conditions. It provides a detailed insight into how the work was done from the script stage to the end result, scene by scene reflecting about both the musical performance and the collaboration between the director and me as a composer. The work was done during the spring term of 2012 at the Royal College of Music in Stockholm and Stockholm Academy of Dramatic Arts..

This study was an assignment for the company Holmen which is located in the region of Örnsköldsvik, Sweden. The study was focusing on the responsibilities of a forestry planner during the planning season. The study was investigating about how much time the planner spent in the office, in the car and out in the forest. Any other issues that would cause delays were also identified. To be more effective and to increase the number of objects to a district bank, a better preparation in the planning stage (for thinning?s or clear cuts) is needed as well as faster transition on to the next area.

There is a great need to reduce nutrient leaching from arable land into lakes and oceans. By using several different types of models it has previously been possible to describe nutrient losses in a catchment area with a minimum unit of sub-catchment level. At present, it is instead desirable to model a smaller catchment with an opportunity to re-connect the results to the corresponding fields in the catchment. Such models already exist but they are not fully able to properly describe Swedish conditions and land characteristics in our region.With the approach of creating such a model, SLU has developed a project with this work as its first stage. The model is expected to be created under the working name SWE-model which stands for Soil Water Environment and is in this first stage supposed to apply the SOIL model in catchment scale. During the procedure to describe the first step in the process of developing such a model adapted to Swedish conditions and which works in the catchment scale with an area of about 10-30 km2, focus has been set on calculating the transport of water flow from different hydrological response units. Regardless of the processes occurring in the soil after the water has been added, it is assumed that all the water which flows from each simulated unit is drained.In the first step the hydrologic response units were identified based on land use and soil type in the study area. With the help of a script with functions that retrieve and transform data, certain units were chosen for simulation. The script was also created in this project. Finally, the model results were aggregated and summarized for each unique unit, for each sub-catchment, and also for the whole catchment.From the results it is possible to see similarities in the flow dynamics between modeled and measured data. The efficiency coefficient has been calculated to correspond to the mean of the measured values for the whole simulation period. With an automated calibration process the model should be able to perform better. The volume error gives an indication of overestimation from the model..

In almost every workplace today IT-systems have strong and significant roll in theeveryday work. It is therefore important that the systems have a good functionalityand that they work as an aid for the users. This thesis aims to study the systems atthe company Telge Nät and to analyse them from a usability perspective. By using thisperspective it has been obvious how difficult it is to make improvements on usability,once the system is in place. Even other larger improvements of the systems aredifficult to make at this stage and this is something that the users are aware of.

My purpose with this thesis has been to find out how to choreograph a fight sequence in ananimated movie. With the help of professional stuntmen and dancers, I have tried to findmethods and techniques used on stage and in live-action film and apply those to animatedfilms. To successfully identify the techniques used, I conducted a number of interviews andanalyzed literature that deals with the subject of fight choreography. By the analysis of themethods provided by the choreographers and selected parts of the literature, I have compiled anumber of steps I recommend 3D animators should to take in their efforts to create their ownfight choreography..

For many years, the construction industry in Sweden has not developed much of an integral approach for design across disciplines. The sector?s impact on society, economics and environment is huge. To make the interactions within the construction industry more efficient, a relatively new concept called BIM (Building Information Modeling) has been introduced. The idea with BIM is that the different actors of the construction industry will work through intelligent CAD software, with common file formats and more cooperation between different actors during the various steps of the building and construction process.The technical consultancy company WSP Sweden is working actively to implement BIM within the frame of its activities.

Shock absorber units play a key role in establishing the driving dynamics and performance of automobiles. Öhlins Racing has manufactured high-tech automotive shock absorbers for over 30 years. Öhlins Racing?s advanced technology has contributed to over 200 world championships in automobile racing. Öhlin?s manufacturing process has long utilized automated fluid filling equipment during the final shock absorber unit assembly stage. The filling process consists of vacuum pumping the shock absorber unit and subsequent transfer of fluid. Vacuum pumping is necessary to remove residual air from the shock absorber unit prior to initiating the liquid filling stage. The presence of undesirable gases drastically compromises the performance of a shock absorber. The filling degree, defined as the final ratio of air to oil, is determined by the specific filling protocol as well as the specific equipment utilized.The current investigation aims to develop a viable technique to accurately determine residual air content in shock absorber units. If the filling degree can be appropriately quantified for a specific manufacturing process, then the air/oil ratio may be quantitatively related to shock absorber performance. The utilized measurement method must be completely integrated into the manufacturing process to guarantee shock absorber performance specifications according to the manufacturer?s standards. By utilizing the measurement method developed in this work, the manufacturing process, manufacturing equipment and product specifications can all be tailored to provide improved filling conditions.The developed measurement method provides accurate quantification of the filling degree under a wide range of processing conditions. The method establishes the relative quantity of air in the shock absorber unit by performing in-situ compressibility tests. The fill ratio can be controlled and varied by manipulating the vacuum pressure exerted during the filling process. Performance tests, however, indicate no correlation between filling degree and unit performance..