The interest in horses and equestrian sport is constantly increasing, and so is the will in both riders and trainers to learn more about the effect the rider and its equipment have on the horse. The last twenty years, more and more studies have been performed were the horse and its kinematics have been in focus. The access to more advanced technology has made it possible to study areas, which earlier have been hard to reach. The knowledge about kinematics in the horse, and how riders and their equipment interact with the horse?s movement, is also of great interest to veterinarians in equine practice.

Växande städer leder till att naturmark omvandlas till stadsmiljöer. Det skapar mer hårdgjorda ytor och därmed ökade volymer dagvatten som behöver hanteras. Modellering av dagvattennätet används ofta för att bedöma kapaciteten och risk för översvämningar. Avrinningsområdets storlek är en avgörande parameter för att bedöma hur mycket vatten som kommer till en viss ledning. Traditionellt har automatisk bestämning av avrinningsområden gjorts enbart utifrån topografin.

Over a long period of time, there has been a rich debate in the academic and financial world if active management can generate an excess return. Many experts say that the current active management strategies is nothing more than a money grab that produces large gains, for banks and investment firms, through high management fees while producing no excess value for the individuals buying their service. In short, an effective market makes it almost impossible for fund managers to produce value for their clients in the long run.No argument has only one side though, other experts say that active management has a role to play because not all investors are rational. This irrationality can lead to mispricing on financial assets in the marketplace and in turn lead to an ineffective market where active management can fill a much needed role. The purpose of this study is therefore to see if active management strategies can create a higher risk adjusted return, taking management fees into consideration, during times of high volatility when the uncertainty is at its peak.

Högbytorp is Ragn-Sells? largest waste facility and it is located north of Stockholm. There is an old landfill still in use, but at the end of this year it will be closed. The waste deposited on the landfill can, through decomposition, give rise to a large amount of methane gas, which is an energy rich gas that can be used for heat and electricity production. To receive a relatively large amount of gas, the decomposition requires a high moisture content in the waste.

AbstractEmbla 5 is an office building which has done a large improvement. The clients of this building has made an order of WSP and the student Anders Kempe to calculate the use of energy for the building, and after that result proposing further measures which can decrease the energy use of Embla 5.The ground for this report is when calculation of the present energy use of the building is stated. To make that information of a number of parameters such as envelope, the heating system and ventilation has been located and set in to the simulation program IDA ICE which calculate the energy use.To improve the energy use further this project has been concentrated to change the system of ventilation. Today the ventilation system is of the kind CAV (constant air volume) and the air flow is dimensioned for after recommendations from BBR and Arbetsmiljöverket in the office spaces. Consider that Embla 5  is an office building where the people only staying for 8-10 hours/day so was the ide to see how much energy saving if the air flow is reduced the time people not being in the building.

AbstractThe assignment were assigned by Camatec Industriteknik AB. Camatec is a Karlstadlocated consulting company, they make everything from pilot studies to complete projects in mechanical design and calculation. They even have their own patented product, Camcoil. It is a winder for steel strips and is used for example with hardening of the steel strip. The assignment has been to solve the problems encountered by some customers within this product.

Världshandeln växer kraftigt och det vanligaste sättet atttransportera gods mellan landsgränser är genom sjöfart. I takt med attvärldshandeln växer, ökar också storleken på fartygen. Detta innebär att enstörre mängd gods anländer samtidigt när ett fartyg förtöjer vid en hamn. Föratt hantera denna ökade mängd gods måste godsnav och hamnar ständigt utvecklaoch effektivisera verksamheten. Detta innebär att långsiktiga prognoser ochplaner måste utvecklas för hur större fartyg skall kunna hanteras.

Today small metal parts are mass-produced as for example rollers in cylinder bearings. At high velocity cutting the metal is cut with a great force in a scissor-like device. Both precision and repeatability is important to be able to guarantee good quality, but from an economical point of view it is also important to keep a great manufacturing capacity. The part of the process that is most time consuming is when the metal bar, that is about to be cut, is fed to the right position. Therefore it is interesting to examine if the time used for positioning can be reduced.

This thesis work has been performed at the department of diagnosis and dependability at Volvo Car Company, Torslanda. The background of this project is based on interest in ascertaining how different factors possibly can affect a diagnosis method, which has been developed to find leaks in the fuel tank and evaporation system. According to the OBD II requirements leaks with an orifice diameter larger or equal to 0,5 mm, must be detected. The idea of the diagnosis method is to create an over pressure in the system with an air-pump. The current through the pump is measured and correlates to the power consumed by the pump.

The aim of this essay was to study the nitrogen flow in two willowplantations, at different locations in the south of Sweden, that wereirrigated with sewage. The study was also performed to compare thedifferences in nitrogen flows between two years, 1998 and 1999. The studywas made in three parts. First, the denitrification activity was measuredusing the acetylen inhibition method. Second the nitrogen flow, as well asthe water- and heat flows, were modeled through the SOIL-SOILN-modelThird; the nitrogen flow was calculated to compare with the results fromthe model.The results from the measurements were then compared with the resultsfrom the SOILN-simulations to detect differences in the denitrificationrate.

Real estate financing is one of the key figures for financial success and fundamental to asuccessful business. Funding will come in several different ways, from existing cashflows andassets to new capital requirements which are aimed at different markets.These markets are constantly changing and since the recent financial crisis, there have beenadjustments and austerity measures which led to that the banks have become more restrictive intheir lending.The real estate industry is characterized by both long-term and short-term thinking that ischaracterized by a solid continuity. Our thesis discuss how the demand is in the real estatebusiness and how mature the Swedish market is for junior financingwith focus aroundmezzanine debt and where are we headed in the near future.We've reached out to the key players in the industry on both the buy and sell side of real estatefinancing but also people between lenders and borrowers that handles transaction advice. Tohave been able to implement the analysisa survey and simulation of an investment calculationwas created. This questionnaire was answered by many real estate companies with senior peoplethat had operational positionsmost associated with corporate commitments.

The purpose of this project was to evaluate how energy efficiently some of JM?s residential buildings can become in standard production. What kind of measures are needed to achieve the level of energy demand that is included in BBR12 (Boverkets Byggregler)? What measures are needed for achieving a lower demand so that the buildings could be classified as passive houses? The investigation has included a single family house and two different types of apartment blocks.The simulation programs Enorm and VIP+ have been used to calculate the energy demand of the buildings. The results from the programs have been compared with the measured energy demand for the three buildings.

Det ständigt ökande trycket på minskande utsläpp och effektivare energianvändning driver utvecklingen av Scanias produkter. För att varakonkurrenskraftiga på marknaden behöver man leverera lastbilar med högre kvalitet och lägre bränsleförbrukning, det vill säga sänka transportkostnaderna förkunden. Ett steg i detta är att utveckla komponenter i fordonet som är optimerade iförsta hand med avseende på hållfasthet men även mot vikt och pris. En betydande andel av lastbilens komponenter är plåtfästen som ofta underprioriteras i produktutvecklingen. Examensarbetet fokuserade därför på att utveckla metoder för konstruktion av plåtfästen.En metod för att förbättra konstruktionerna är att arbeta med simuleringsdriven konstruktion.

To achieve the requirements to decrease emissions of greenhouse gases by 20 % by 2020, Swedenneeds to increase its use of bioenergy. In doing so it seems natural that those who already haveaccess to large amounts of biofuels in the form of by-products such as straw, wood chips anddigestible materials take advantage of these assets locally. By combining production of heat withpower production at the farm it may be possible to not only reduce the direct use of fossil fuel forheating but also reduce energy costs.The purpose was to simulate different cases of using a small scale biofueled combined heat andpower plant for farm-based systems. A MatLab-model was developed and used to draw conclusionsabout the costs for production of heat and electricity with different conversion technologies.The model uses climate data to simulate the variations in heat energy demand on a day-to-day basis.The given heat demand is the base of the simulation and from this the possible electric output iscalculated. This study has focused on the impact of the following properties: electric-, heat- andtotal efficiency, fuel, fuel price and specific fuel requirements.

Hammarby Sjöstad is a new district in southern Stockholm. A main objective with the Sjöstad project was to halve the environmental impact compared to other construction work. The environmental goals involve a halved water consumption rate, a local treatment of storm water and trials aiming to extract nutrients from the waste water. Sjöstadsverket is an experimental treatment plant used for testing new treatment processes for domestic waste water from Hammarby Sjöstad. The results are to be compared with the conventional process used at Henrikdals treatment plant today.