I denna uppsats behandlas hur klassningssällskapens regelverk kan bidra till ett örlogsfartygs överlevnad vid vapenverkan. Syftet är att undersöka om regelverken kan användas för att implementera stryktålighet genom sina notationer och krav på redundans, separation och skydd mot splitter.Arbetet inleds genom kunskapsuppbyggnad av teorier som behandlar örlogsfartygs överlevnad, vilka sedermera bildar arbetets teoriram. Sedan sker en analys av regelverken samt en fiktiv operativ miljö skapas för att ta fram taktiska uppgifter samt hot, vilka sedan omvandlas till verkansdelar och kritiska system. Därefter skapas modellerna som tillsammans med verkansdelarna används i simuleringen som genomförs i simuleringsverktyget Semiautomatsikt fartygs verktyg för AVAL. Simuleringarna mäter utslagssannolikheter av olika funktioner ombord vid påverkan från de framtagna verkansdelarna.

Along with rising energy prices and increasing awareness of environmental issues, the criteria for buildings energy performance have been sharpened through the years. Today, ?passive house? and ?low energy house? are commonly used phrases in the construction industry and is expected to become increasingly common in the future.For houses with well-insulated building envelope the importance of well constructed details increases when minimizing the heat losses. Examples of these details are floor-wall junction and window openings in the wall. In such connections thermal bridges occur, which means that heat more easily is transported out of the building, compared to the rest of the building envelope.This report deals with detail solutions around windows and a comparison between a traditional slab and a foundation from Koljern consisting of foam glass.

Due to increasing regulations regarding new diesel vehicles particulate matteremissions the new Scania truck, Scania Euro 6, has been equipped with a particulatefilter. This component effectively stores the particles in the exhaust gas but must becleaned in order to prevent itself from clogging. The filter is cleaned through aprocess named regeneration which is a thermodynamic process in which thetemperature of the filter is raised through fuel supplied to the exhaust gas.The purpose of this thesis is to contribute to the development of improved controlstrategies of the temperature during the regeneration process through thedevelopment of model-based controllers. These controllers are designed in order tohave good performance in stationary as well as automatic regeneration.In order to develop these model-based controllers a model of the system isconstructed. The model is described as a linear thermodynamic grey-box model withflow varying parameters, showing good results in validation.The model provides a simulation environment during the controller design, which isfocused around the development of linear regulators with the exhaust gas mass flowas a scheduling variable whose size determines controllers? mode of operation.

What is sketching for a landscape architect? Does it involve anything else than the sketching process, the tool withwhich we work and carry a project through? The answer is yes, it is a process but one that includes many functionslike making notes in drawings or words for remembrance, a way to convey your ideas to others and to clearifyideas for yourself or together in a group. This thesis aim to give a broader picture of what sketches and sketchingis through many voices, and images made by architects, a psychiatrist, a teacher, and landscape architect students.The focus is on the hand made sketch and show many examples of what a sketch can look like.What is a sketch? A sketch can be many things, but the general consensus is that it is made fast and as a draft. Itcan be made in any material, two or three dimensional.

Bakgrund. En gyllene standard för att bestämma noggrannheten för intraorala scannrar existerar inte. Intraorala scannrars prestanda som ges av olika leverantörer är inte fullt jämförbara. Det finns ett behov att standardisera och ta fram oberoende försöksupplägg för att kunna jämföra intraorala scannrar. Mål. Målet med studien var att beskriva och utvärdera en ny metod för att bestämma noggrannheten av intraorala scannrar genom ett standardiserat in vitro testförsök och att använda metoden för att beräkna noggrannheten på en kommersiell intraoral scanner. Material och metod.

The environmental monitoring in Sweden has been developed by several different parties and is now being coordinated and made more effective in order to meet the current demands on high quality information regarding the state of the environment. Sweden has been divided into five different water districts based on watershed areas because of requirements in the Water Directive of the EU. In Sweden there are two common types of environmental monitoring programs used to gather information on changes in time and in space. Currently both these two types are used for lakes in the water district of the western sea but only one is used for watersheds. The purpose of this report is to supply basic information regarding the possible need for a second environmental monitoring program for watersheds in order to better describe the spatial variation within the district as well as to determine the number of samples necessary in order to describe the district over time and space.

There is a lack of consensus within politics on how to deal with the so-called youth problem that exists in vulnerable areas. The politicians' positions are communicated in speech and writing and influence the majority society's attitude to children in vulnerable areas. Children are at the same time a vulnerable group in society. They are dependent on adults and need their guidance and support throughout their upbringing. In vulnerable areas live children whose health is affected by social and economic vulnerability and discrimination from the outside world. By looking into how hegemonic masculinity as norms are formulated in Swedish political documents, in relation to experiences of stigmatization and violence among children from vulnerable areas, this study wishes to examine if children?s right to a life without violence is being respected in vulnerable areas.

In recent years, existing solutions for cooling personal computer CPUs have been supplemented by a new product category, factory sealed water cooling loops. These systems, consisting of a water block with an integrated pump, a fan and a radiator, perform well compared to the air cooling solutions but are less effective than larger, custom-built water cooling systems.This project aims to explore the most important aspects of a factory sealed system and to identify possible cost-effective enhancements of the performance.The most significant differences between the different groups of water cooling loops are the block design and the pumping power. The performance of both categories is also largely dependent on the fan power, but increasing fan power has a large negative impact on the noise level.Both radiator size and fan model choice appear, in tests, to be relatively unimportant, presuming that the noise level is kept constant. The position and direction of the fan, however, has significant impact on both the temperature and the sound level.Water blocks can be designed in several different ways, both regarding the heatsink design and the flow direction. In simulation, flow with the inlet centered above the heatsink result in considerably lower pressure drop and slightly higher temperatures than flow through the block, for heatsinks with fin arrays.Creating a competitive product in this product segment certainly seems possible, as there are performance-increasing changes to be made that seemingly has little impact on the production cost.

AbstractThe assignment were assigned by Camatec Industriteknik AB. Camatec is a Karlstadlocated consulting company, they make everything from pilot studies to complete projects in mechanical design and calculation. They even have their own patented product, Camcoil. It is a winder for steel strips and is used for example with hardening of the steel strip. The assignment has been to solve the problems encountered by some customers within this product.

The idea to this bachelor thesis was born after carefully following the coverage of Johan Persson and Martin Schibbye in Swedish media during their imprisonment in Ethiopia from June 2011 to September 2012. Based on our interest we designed two questions to answer throughout the thesis. These are:(1) How are Johan Persson and Martin Schibbye portrayed as journalists in the discussion about them that has taken place in Swedish media?(2) How is the journalistic profession described in the discussion about Johan Persson and Martin Schibbye in Swedish media? To answer these questions we decided to analyse texts that can be defined as the genre of opinion journalism, which all came from Swedish printed media. We have chosen 16 texts to analyse which show the variety of ways to write about Persson and Schibbye in the chosen genre during the chosen period of time. Opinion journalism is what newspapers use to attract readers, as they want to supplement the news coverage with comments and analysis from ?experts?. Persson and Schibbye were imprisoned in Ethiopia in June of 2011, and weren?t released until 15 months later, in September of 2012. To analyse our material we have amongst others used theories regarding social constructionism, representation, discourse, the journalistic identity and the journalistic ideals that exist in Swedish society.

This is an essay concerning the density of the city. An increasing amount of today?s cities have a shortage of space available for the erection of new buildings and settlements, especially in areas close to the city-centre. New buildings and settlements are therefore often found in the outskirts of the city, resulting in long distances between work and living for many people. These long distances are a waste of limited resources and are inconsistent with the vision of the sustainable city.The challenge for the future is to insert new buildings and settlements in the existing city-structure and in this way reduce the distances between different city-functions.The density of the city can be increased in two different ways; by inserting new buildings between existing ones or by extension existing buildings, for example by an additional floor.

The aim of this study was to examine the amounts of heavy metals in the sediment of a wetland constructed for stormwater treatment. The wetland is called Vattenparken and is located in the city of Enköping. The heavy metals which were analysed were Pb, Cd, Ni, Zn, Cu, Cr and Hg. The total metal concentrations were determined using HNO3 chemical extraction. From 8 sampling sites 5 sediment cores were taken.

Bakgrund: I och med att Basel II har instiftats i Sverige så måste finansiella institutioner beräkna sin marknadsrisk på sina portföljer. Detta kan göras genom olika VaR metoder. Dessa ger dock olika uppskattningar på marknadsrisken. De finansiella instituten får använda sig av den metod som de anser reflektera marknadsrisken bäst. Det finns dock ingen metod som utsetts till standard.Syfte: Syftet med detta arbete är att jämföra olika VaR-metoders skattning av marknadsrisken utifrån verkligt utfall, för att urskilja vilken metod som är funktionsdugligast.Avgränsningar: Denna undersökning inkluderar fyra olika VaR metoder.

The purpose of this paper is to test a procedure that would be useful for a certain, more final purpose. Assume that you want to know if the differences in the result of a certain effort in health care have any connection with differences between the life situations of the patients. This would be easier to investigate if the life situations of the patients had connection to the easily available variable Health Care Cost (in Swedish VK). In that case the searching for connections between VK of patient groups and the result of health care efforts would be sufficient to gain knowledge of possible connection between health care efforts and life situations. Thus that is the final purpose.

One of the main tasks of the Swedish Armed Forces over the past few years has been International assignments, which increased the importance of the Lessons Learned process. Methods of simulator training with computers have become more frequent and the technical ability to collect digital data from sensors has been developed as well. This work demonstrates how the experience of Lessons Learned can be communicated with the computer simulator StriSimPC and how modern technology in future support experiences from the Lessons Learned process at the tactical level in the Army.Currently knowledge sharing consists of several processes and strategies in the Swedish Armed Forces. This is done by written reports, oral presentations and different practical exercises.This case study shows the functions of the simulator StriSimPC, methods of training and how it is used today. The study also describes the future opportunities, where digital metadata acquired from the modern combat vehicles could contribute sharing of experience in the Lessons Learned process.The summarized conclusions indicate that StriSimPC can combine the two strategies for personalization and codification of knowledge transfer to reach a higher level of learning.