Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

As the ability to computerize processes and tasks increase, the proliferation of complex systems in our society continues. How these systems are deployed in the organizations where they are meant to be utilized has been shown to have a large impact on how well they function.In January of 2011 the Enköping hospital initiated the deployment of an IT-support for drug management, a module in the general health care system Cambio COSMIC. Other health care providers in the county, and in the rest of Sweden, have had mixed feelings toward the module. Some have outright refused the module, claiming that it is detrimental to patient safety. One of the arguments for deploying the module in Enköping, however, was that it was needed to improve patient safety.The Enköping hospital is considered to be a well organized institution with good leadership and earlier good experiences regarding IT-systems.

The codling moth, Cydia pomonella is a common pest in apple orchards and can be found worldwide. Feeding by codling moth larvae can cause a substantial decrease in apple yield. Control methods comprise for example the use of pesticides, viruses and pheromones. As a sustainable control method, pheromones have been successfully applied to disrupt moth mating behaviour. Other behaviours like foraging, search for mating sites or host finding could be potential targets for additional odour-mediated behavioural manipulation but need further investigations of the underlying odour stimuli and behavioural plasticity. Many insects are attracted to the smell of fermenting fruit and associated microorganisms.

In today's producing companies, there is a high demand on early integrated productdevelopment. One way to facilitate communication between departments and collaborationbetween people and thereby enable early sharing of product information within the companyis to use PLM, Product Lifecycle Management.The CAD environment at Scania is at the moment being upgraded from Catia v4 to Catiav5. In this stage it is important that also the interacting computer systems in Scania?s PLMenvironment are adjusted and in the future join the development. Scania has an idea of howthese systems will be developed as the transition from Catia v4 to Catia v5 is being carriedout.

ABSTRACT: Commercial swab transport systems are used for collection and transporting of fecal and other microbiological samples. This system must maintain viability and contribute to survival of microorganisms during transport to the laboratory. Four swab transport systems have been compared, eSwab, ?- Transwab and fecalSwab, all three with flocked swabs, and Copan Venturi Transystem with rayon swabs. The study followed the recommendations from the Clinical Laboratory Standard Institute; document M40-A for recovery of Samonella, Shigella, Yersinia and Neisseria gonorrhoeae after storage for 0, 6, 24, 48 and 72 h at room- (22-25°C) and refrigerated (2-8ºC) temperature.

Mine waste from Ljusnarsbergsfältet in Kopparberg, Sweden, is considered to constitute a great risk for human health and the surrounding environment. Some of the waste rock consists of sulphide minerals. When sulphide minerals come into contact with dissolved oxygen and precipitation, oxidation may occur resulting in acid mine drainage (AMD) and the release of heavy metals. The purpose of this study has been to characterise the waste material and try to chemically stabilize the waste rock with a mixture of sewage sludge and calcium carbonate. The drawback of using organic matter is the risk that dissolved organic matter can act as a complexing agent for heavy metals and in this way increase their mobility.

Reading spaceFurniture for reading for the new city library of GöteborgThe main purpose of my project has been to inspire people to read books at the library. I wanted to create something very site specific and chose a room on the second floor of the new city library to work with. To be able to relax, feel inspired and to concentrate on reading, the visitors of the library need to experience a sense of security. My solution to the different conditions or problems in the room and the needs I identified is a seat hanging inside a frame. When sitting down in the seat, the frame is low enough to see over but it is still experienced as a private spatiality.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

This is a Master´s Thesis based on my own idea instead of that of a company. It is a survey that focuses on finding out more about which part of the development process that is blocking the establishment of electronic scorecards on the golf market. Why has it not been introduced on the market in a larger scale yet, considering the technology we possess today? This question is investigated through interviews with the Swedish Golf association, and three companies that have chosen different paths to implement an electronic scorecard. The interviews focuses on finding out what developers and the association believe to be the main problem, before taking the next step in releasing electronic scorecards on a larger scale.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

With growing economies and better living standards in many parts of the world today, there is a need of expanding the capacity of generating electricity. The alternatives for renewable energy technologies are not fully developed and have still some problems to conquer.The company Minesto has developed a technology that is called Deep Green. It is designed to gain electricity from tidal currents. Deep Green works in a similar way as a kite that is attached to the seafloor with a moving wire. It contains of a wing that moves due to the water current.

The existence for companies today consists of constant challenges with customers that want more individual products with high quality as quickly as possible. For a company to be able to have a short delivery time, it must also have a short production time. This makes streamlining and improvement of processes a big part of a company?s workThis thesis has been carried out together with the company Lasermax Roll Systems AB, a world-leading manufacturer of feeding, finishing and monitoring systems for high-speed digital printers. They manufacture their products according to the assembling for costumer order principle.The purpose with this thesis is to map and analyze, the assembling process and the test process at Lasermax Roll Systems AB.

ABB and Prevas have initiated a collaboration to sell a system to optimize steel industry furnaces, called FOCS. The purpose of this thesis is to investigate possibilities for integrating Prevas FOCS and ABB 800xA.The result of the investigation is used for an implementation of a prototype of the integrated system. The study shows a general method that can be used when implementing two software systems. The prototype of the integrated systems is made with usability principles in mind. This is a very important aspect in order to create a good working environment for the operators of a steel plant.