The aim of this project was to describe and to evaluate five small sewage treatment plants in the municipality of Laholm, Sweden, in order to investigate the treatment efficiency and to evaluate if effluents comply with discharge permits. The treatment systems were designed to treat effluents from 90 to 500 population equivalents. A report on the design and the present state of each sewage treatment plant has been made. This was made based upon previous documentation on water quality and by new sampling campaign as there were only a few previous measurements. Data has been evaluated and remedial actions proposed for those treatment plants that don?t fulfill discharge permits.

LEXION is the name of the largest series of combines made by the CLAAS factory in Germany. LEXION was introduced on the Swedish market 1996 and was for sale in Sweden from 1997. LMB have sold over 400 LEXION-combines in Sweden. In cooperation with the Swedish general agency we decided to make a market research on the Swedish LEXION-market. The questionnaire was supposed to give answers about capacity and technical equipment. Before I made the questionnaire I studied manuals and combines. I got 81 answers of about 325 questionnaires. That makes 25 % reply frequency.

During spring 2008, the Institution for Landscape Architecture, in co-operation with Naturvårdsverket, initiated a survey in the districts of Skåne. In the survey, four out of eight park characters were examined, and it was observed that not only was it difficult interpreting these characters, but it was also presented with difficulties separating ??Lustgården?? and ??Allmänningen??. The purpose of this master thesis in Landscape Architecture and Environmental Psychology is twofold. Firstly, a theoretical framework will be constructed on the thee characters ??Allmänningen??, ??Lustgården?? and ??Centrum, festen??.

Water is the most essential resource for life. In cases where drinking water is processed from surface water it is important to ensure the raw water is of good quality, and is suitable for processing through the water treatment plant.The drinking water for Västerås is sourced from Västeråsfjärden, in the western side of Lake Mälaren. The city itself is home to marinas, ports, a wastewater treatment plant, the Svartån outlet, sewage pumping stations and stormwater outlets. Because of the negative effects these activities have on surface water quality, Mälarenergi AB is interested in relocating the raw water intake point to Granfjärden, 10 km east of Västeråsfjärden. At Granfjärden the intake point would be less exposed to the activities in Västerås, and could be placed at a greater depth, resulting in better water quality.In this Master?s thesis the water quality and the pollution risks at Västeråsfjärden and Granfjärden sites are compared.

The project is about making a Re-Design of the Swedish Socialistic Newspaper ?Dagens ETC?. The background to the project is my search for commitment when I work with a specific customer or project and how importantthat commitment are?The project was from the beginning split up to three different phases. The meaning of the first phase where to make a re-design mainly based on a interview with Johan Ehernberg, the chef editor on ETC.The second phase was a design totally made of my own idea and creative view as a Graphic Designer.I had in mind to make the third phase based on the result of the first two phases.During phase one and two I reconsidered and decided to skip the third step and put more effort in to the two first ones.

Att människor idag avstår från att delta i sociala aktiviteter i samhället på grund av att de känner sig otrygga i kollektivtrafiken, och då särskilt på hållplatser och vägarna till och från, går inte ihop med Göteborgsregionens mål om en ökad användning av kollektivtrafiken. För att få fler att välja kollektivtrafiken som färdmedel måste tryggheten kring hållplatserna öka, vilket skulle innebära fördelar för både hälsa, miljö och välfärd. Det är speciellt kvinnor som anger att de, särskilt kvällstid, avstår från vissa aktiviteter för att de inte känner sig trygga på hållplatsen eller väljer att gå långa omvägar hem för att de känner sig otrygga. Olika fysiska åtgärder, i det offentliga rummet, påverkar den upplevda tryggheten hos människor och med enkla medel tryggheten öka avsevärt på en plats.Syftet med detta arbete är att belysa trygghetsfrågor i samband med hållplatser i Göteborg för att bidra till den debatt som finns angående trygghet i kollektivtrafiken.För att göra detta har en analysmetod tagits fram och ett verktyg har utformats för att undersöka tryggheten på en hållplats och dess närmaste omgivning. Detta kommer att underlätta prioriteringar och utveckling av platsen ur en trygghetssynpunkt.En omfattande litteraturstudie har genomförts för att få en uppfattning av begreppet trygghet och vad det innebär.

AbstractIn this bachelor thesis I discuss and analyse the current situation of the Venezuelan democracy. By using a theoretical framework based on the theory of horizontal accountability, I focus on the interaction between different institutions and branches within the state of Venezuela. The analysis focuses on the strenghts and flaws of the newly accepted constitution, and to what extent the institutions of checks and balances remain true to the laws and the constitution of 1999. My conclusions are that in terms of vertical accountability, the Chávez-regime acknowledges a wide popular support for their governmental actions. In contrast, the incumbent administration shows almost no respect for horizontal accountability.

This thesis describes the development ofa linear guidance system suited for NORCAN's aluminium profiles. The work took place at LP Innovation, a small technical consulting company, located in Uppsala. The work started with gathering and searching for information. A lot of the information was found in product catalogs, but my supervisor was also a great source of knowledge, as well as the other engineers at the company. I also had the opportunity to work with the rea lprofiles, to get a feeling and greater understanding how they were supposed to be used. With the use of sketching and CAD, a number of concepts were generated.

The purpose of this thesis was to examine relevance of the proposition made by new insitutionalists about institutional and technical environment. This proposition originaly made by Meyer & Rowan (1977) has two core assumptions: The first is that all organizations are controlled by combinations of types of demands; technical demands for efficient production and institutional demands to adept to cultural and normative expectations. The second assumption is that there exists a few organizations dominated almost entirely by one typy of demand. Organizations dominated by institutional demands are said to live in an institutional environment, while technical organizations is said operate in a technical environment. This thesis has examined if these assumptions are still applicable in describing organizational interaction with the environment.

From 1710 to 1713 the plague raged through the Swedish province of Scania. Other studies have been made on how the disease affected the society during the epidemic. This study tries to focus on the recovery afterwards. How did the population and the farmsteads recover after the plague? Statistics from parish registers and cameral records show interesting patterns in the demography, and that the recovery was far from complete 1720.

This paper is built on a studytrip to north India i made under the autumn 2005. The purpose for this trip was to give me as a teatcher an experience and insight how to work with art in another culture. I´ve been in ?Upper Dharamsala? even called Mcleod Ganj and visited art schools and a great artist . Too implement my investigation i have made interviews and observations in schools and i also hade the chance to spend a hole day with a great artist in India, my impresions was many, and i learned so mutch with this yourney.

This Master?s Thesis work was performed at the Studio Engineer department at Volvo CarsDesign Centre in Gothenburg, Sweden. The assignment has been to create a new idea of an airvent where the news value mainly was focused at functionality but also with great attention onvisual appearance.The work has been totally independent and not been aimed to any specific car model. Theindependency initially made that the visual appearance primary wasn?t limited in any way dueto surrounding components.

Title: Pricing of IPO:s on the Swedish stock market Authors: Mikael Gustavsson Martin Kvist Henrik Wannberg Tutor: Anders Hederstierna Problem: There are certain sets of problems for underwriters when they are pricing potential stock-exchange companies. The problem partly consists of estimating the demand at an IPO and also to accurately value the business in comparison to the market. To set the price per share is problematic, since the company carrying out the public offering wants to optimise the amount of capital at the same time as they want the share to be subscribed in full. If the IPO would not be carried out, it could cause harm to the position of the underwriters. Purpose: To investigate whether underpricing exists associated with IPO:s on the Swedish market during the period 1995-1999. Method: The collection of data has been achieved by means of: Internet, E-mail and telephone calls. Conclusions: We have reached the conclusion that oversubscribing in comparison to the return at an IPO has an average growth of 3.3 per cent the first day, on every occasion of oversubscribing. For the studied population, including 138 initial public offerings, the average market value rise is 15 per cent the first day. When we made our calculations, adjustments have been made for the general index of Affärsvärlden (AFGX).

This master thesis was made to validate hydropower models of a turbine governor,Kaplan turbine and a Francis turbine in the power system simulator ARISTO atSvenska Kraftnät. The validation was made in three steps. The first step was to makesure the models was implement correctly in the simulator. The second was tocompare the simulation results from the Kaplan turbine model to data from a realhydropower plant. The comparison was made to see how the models could generatesimulation result that was similar to the reference power station.

This report looks at the possibility of designing a universal adapter for Flat Blade windshield wipers in cooperation with European Automotive Supplier AB.To understand and see if this is possible, a research and an extensive patent search where done. Then to add structure to the project a Ganttschematic were developed. To generate good and solid ideas, different methods for product development were looked upon.When a method was chosen and applied, a series of concepts emerged. Now the focus was to design and construct all the pieces. The desired manufacture procedures were looked upon as well as materials.